Pakiet: xc3sprog (0+svn795+dfsg-4)
Odnośniki dla xc3sprog
Zasoby systemu Trisquel:
- Install using apturl
- Entry at directory.fsf.org
- Raporty o błędach
- Changelog
- Informacje nt. praw autorskich
Pobieranie pakietu źródłowego xc3sprog:
- [xc3sprog_0+svn795+dfsg-4.dsc]
- [xc3sprog_0+svn795+dfsg.orig.tar.gz]
- [xc3sprog_0+svn795+dfsg-4.debian.tar.xz]
Opiekun:
Original Maintainer:
- Ricardo Ribalda Delgado
Zasoby zewnętrzne:
- Strona internetowa [xc3sprog.sourceforge.net]
Podobne pakiety:
JTAG flashing tool for FPGAs, CPLDs and EEPROMs
xc3sprog is a suite of utilities for programming Xilinx FPGAs, CPLDs, and EEPROMs with the Xilinx Parallel Cable and other JTAG adapters under Linux. xc3sprog runs as a command-line application.
The main features include:
- Reading a .BIT file from Xilinx design tools and programming it into an FPGA. - Reading a JEDEC file and programming it into a CPLD. - Programming a .BIT file into an on-board configuration PROM. - Programming a binary image into on-board SPI flash memory. - Reading the contents of a PROM chip back to a file. - Programming AVR microcontrollers.
The functionality of xc3sprog is similar to that of Xilinx IMPACT. There are also similarities with other free JTAG tools, such as UrJTAG. However, xc3sprog has a number of advantages:
- xc3sprog is free software. - It is a command-line tool. - It works on Linux without the need to install binary "cable-drivers". (Although some types of JTAG cables need to load firmware.) - It uses an optional configuration file to recognize new JTAG devices. - It contains programming algorithms for the supported devices, enabling the direct use of binary files (.BIT / JEDEC) from design tools (as opposed to intermediate SVF/STAPLE files).
Inne pakiety związane z xc3sprog
|
|
|
-
- dep: libc6 (>= 2.33)
- GNU C Library: Shared libraries
również pakiet wirtualny udostępniany przez libc6-udeb
-
- dep: libftdi1-2 (>= 1.2)
- C Library to control and program the FTDI USB controllers
-
- dep: libgcc-s1 (>= 3.0) [nie armhf]
- GCC support library
- dep: libgcc-s1 (>= 3.5) [armhf]
-
- dep: libstdc++6 (>= 5.2)
- GNU Standard C++ Library v3
-
- dep: libusb-0.1-4 (>= 2:0.1.12)
- userspace USB programming library
Pobieranie xc3sprog
Architektura | Rozmiar pakietu | Rozmiar po instalacji | Pliki |
---|---|---|---|
amd64 | 156,3 KiB | 708 KiB | [lista plików] |
arm64 | 148,1 KiB | 680 KiB | [lista plików] |
armhf | 140,1 KiB | 492 KiB | [lista plików] |
ppc64el | 161,6 KiB | 1076 KiB | [lista plików] |