Skip to content
Sections
>> Trisquel >> Paketit >> nabia >> admin >> nvramtool
etiona  ] [  nabia  ]
[ Source: nvramtool  ]

Paketti: nvramtool (0.0+r3669-2.2build1)

Read/write coreboot-related NVRAM/CMOS information

nvramtool is a utility for reading/writing coreboot parameters in NVRAM/CMOS and displaying information from the so-called 'coreboot table'.

The coreboot table resides in low physical memory. It is created at boot time by coreboot, and contains various system information such as the type of mainboard in use. It specifies locations in the NVRAM/CMOS (nonvolatile RAM) where the coreboot parameters are stored.

This program is mostly intended for (x86-based) systems that use coreboot, but can also be used for non-coreboot system (e.g. for dumping all NVRAM bytes).

For information about coreboot, see http://www.coreboot.org/.

Muut pakettiin nvramtool liittyvät paketit

  • depends
  • recommends
  • suggests
  • dep: libc6 (>= 2.14) [amd64]
    GNU C Library: Shared libraries
    myös näennäispaketti, jonka toteuttaa libc6-udeb
    dep: libc6 (>= 2.4) [armhf]

Imuroi nvramtool

Imurointi kaikille saataville arkkitehtuureille
Arkkitehtuuri Paketin koko Koko asennettuna Tiedostot
amd64 26.2 kt79 kt [tiedostoluettelo]
armhf 23.7 kt62 kt [tiedostoluettelo]