Skip to content
Sections
>> Trisquel >> Paketit >> aramo >> electronics >> pcb2gcode
etiona  ] [  nabia  ] [  aramo  ]
[ Source: pcb2gcode  ]

Paketti: pcb2gcode (1.1.4-git20120902-1.1build5)

command-line tool for engraving PCBs using CNCs

pcp2gcode is a command-line tool for isolation routing and drilling PCBs that provides full support for both single- and double-sided boards. It generates G-code (RS-274 code) for engraving and drilling from Gerber and Excellon files.

Muut pakettiin pcb2gcode liittyvät paketit

  • depends
  • recommends
  • suggests
  • dep: gerbv (>= 2.7.0)
    Gerber file viewer (only RS 274 X format)
  • dep: libboost-program-options1.74.0 (>= 1.74.0)
    program options library for C++
  • dep: libc6 (>= 2.14) [amd64]
    GNU C Library: Shared libraries
    myös näennäispaketti, jonka toteuttaa libc6-udeb
    dep: libc6 (>= 2.17) [arm64, ppc64el]
    dep: libc6 (>= 2.4) [armhf]
  • dep: libcairo2 (>= 1.2.4)
    Cairo 2D vector graphics library
  • dep: libcairomm-1.0-1v5 (>= 1.12.0)
    C++ wrappers for Cairo (shared libraries)
  • dep: libgcc-s1 (>= 3.0) [ei armhf]
    GCC support library
    dep: libgcc-s1 (>= 3.5) [armhf]
  • dep: libglib2.0-0 (>= 2.16.0)
    GLib library of C routines
  • dep: libglibmm-2.4-1v5 (>= 2.64.2)
    C++ wrapper for the GLib toolkit (shared libraries)
  • dep: libgtkmm-2.4-1v5 (>= 1:2.24.0)
    C++ wrappers for GTK+ 2 (shared libraries)
  • dep: libstdc++6 (>= 5.2) [armhf]
    GNU Standard C++ Library v3
    dep: libstdc++6 (>= 9) [ei armhf]

Imuroi pcb2gcode

Imurointi kaikille saataville arkkitehtuureille
Arkkitehtuuri Paketin koko Koko asennettuna Tiedostot
amd64 105.1 kt354 kt [tiedostoluettelo]
arm64 94.8 kt338 kt [tiedostoluettelo]
armhf 89.4 kt229 kt [tiedostoluettelo]
ppc64el 110.1 kt474 kt [tiedostoluettelo]