powernap (2.21-0ubuntu1) vivid; urgency=medium * debian/powernap.override: - only set the override as "manual" to really disable powernap under upstart * debian/powernap.postinst: - more elegant way to only strip the "manual" part (and removing the override if empty) -- Didier Roche Wed, 01 Apr 2015 09:17:28 +0200 powernap (2.20-0ubuntu1) vivid; urgency=medium * Rebuild for Ubuntu release -- Dustin Kirkland Fri, 16 Jan 2015 20:33:48 -0600 powernap (2.19-0ubuntu1) vivid; urgency=low [ Didier Roche ] * Add systemd support. Keep the previously enabled status. * Ship an override file instead of /etc/default/powernap to disable by default the service under upstart and don't rely on the default START state in conffile. Handle the transition to keep the same state under systemd. * Remove now uneeded /etc/default/powernap * Factorize some prestart code in new /usr/share/powernap/powernap-ethtool [ Benjamin Kerensa ] * Fix Typo in Package Description -- Dustin Kirkland Fri, 16 Jan 2015 20:33:45 -0600 powernap (2.18-0ubuntu2) trusty; urgency=medium * Rebuild to drop files installed into /usr/share/pyshared. -- Matthias Klose Sun, 23 Feb 2014 13:50:01 +0000 powernap (2.18-0ubuntu1) raring; urgency=low [ Frank Steinberg ] * LoadMonitor: handle float values correctly (LP: #1070696) * TCPMonitor: handle IPv6 connections correctly (LP: #1070695) [ Andres Rodriguez ] * debian/powernap.default: Add so that powernap does not start by default. -- Andres Rodriguez Wed, 19 Dec 2012 11:11:01 -0500 powernap (2.17-0ubuntu1) precise; urgency=low [ Bryce Harrington ] * actions/{service,kernel_module}: Add scripts to handle services and kernel modules on powersave mode. [ Andres Rodriguez ] * Re-organize source to differ between pm-utils actions and powernap actions. - debian/powernap-common.install: Update. - powernap.spec: Update. * Disable SERVICES and KERN_MODULES on PowerSave mode (LP: #887684): - powernap/powernap.py: Load from config. - debian/powernap-common.install: Install new scripts. - Add take powersave action and its recover equivalent. * actions/pm/01cpu_online: Disable by default. -- Andres Rodriguez Thu, 01 Dec 2011 12:43:51 -0500 powernap (2.16-0ubuntu1) precise; urgency=low [ Andres Rodriguez ] * debian/control: Move python-scapy Depends to Suggests. * Do not use awk to parse output. (LP: #879591) - bin/powerwake - powerwake/powerwake.py [ Eric Sandeen ] * powernap.spec: cleaned up a bit for better building/installation on RH systems [ Remi Druilhe ] * Dynamically reload configuration file (LP: #887680) -- Andres Rodriguez Tue, 29 Nov 2011 14:42:41 -0500 powernap (2.15-0ubuntu1) oneiric; urgency=low * actions/eth_speed: Disable by default to not experience connectivity loss on certain network configs. (LP: #730210) -- Andres Rodriguez Fri, 09 Sep 2011 15:32:30 -0400 powernap (2.14-0ubuntu1) oneiric; urgency=low * bin/powerwake: - fix the powerake mac caching methodology, which was somewhat broken -- Dustin Kirkland Mon, 22 Aug 2011 00:38:17 -0500 powernap (2.13-0ubuntu1) oneiric; urgency=low [ Dustin Kirkland ] * sbin/powernapd: - make sure that powerwake-now works, even if a system has gone into powersave mode by other means (erhm, gnome-power-settings, erhm) * actions/01cpu_online: - drop the nasty sleep 10 hack around gnome-settings-daemon bugginess; doesn't seem to be a problem at this point in Oneiric; If this bug shows back up, we need to solve it in a better way * actions/video: - drop incorrect inline docs * config: - now that the default is powersave mode, adjust the absent time and grace period; it takes fractions of a second to go in and out of powersave mode * actions/00flag, debian/powernap.upstart, sbin/powernapd: LP: #829618 - use a flag in shared memory that notes the powersave status of the system - set/remove that flag in the 00flag script in the pm-utils suite - set/remove/query that same flag in powernapd itself * debian/control: LP: #637635 - depend on anacron, to better handle server cronjobs on systems that might have been asleep * powernap/monitors/InputMonitor.py: LP: #826278 - test device path existence before opening, fixes nasty crash -- Dustin Kirkland Fri, 19 Aug 2011 09:57:07 -0700 powernap (2.12-0ubuntu1) oneiric; urgency=low [ Andres Rodriguez ] * Add Initial PowerNap (powerwaked) Server Capabilities: - powerwake/*: Add module and Initial ARPMonitor (LP: #737479). - powerwaked.conf: Add config file. - powerwaked: Add daemon. - powerwake-monitor: Add tool to add, delete, list, etc. * Package powernap-server: - debian/control: Add powerwaked, powerwake-common, powernap-server - debian/{powerwaked,powerwake-common}.install: Add - debian/powerwaked.upstart: Add upstart job. [ Dustin Kirkland ] * bin/powerwake: - only seed the arp cache if the argument is not already a mac address -- Andres Rodriguez Tue, 09 Aug 2011 15:28:35 -0400 powernap (2.11-0ubuntu1) oneiric; urgency=low * actions/01cpu_online: Delay disabling of CPU's when machine is Desktop to allow it to apply template and not crash. -- Andres Rodriguez Mon, 20 Jun 2011 18:08:09 -0400 powernap (2.10-0ubuntu1) oneiric; urgency=low * Add support for port ranges to TCPMonitor (LP: #760729) - powernap/monitors/TCPMonitor.py: Add support. - powernap/powernap.py: Ensure that ports are now passed as strings. - config: Update to reflect new feature. * debian/control: - Bump Build-Depends on debhelper. - Change python supported version. - Update Bzr-VCS to current. - Set Dustin as Original maintainer and set myself as maintainer. -- Andres Rodriguez Thu, 09 Jun 2011 16:42:59 -0400 powernap (2.9-0ubuntu1) oneiric; urgency=low * sbin/powernap, sbin/powernapd: - add an indicator to show when powernap is engaged, remove after waking * === added directory debian/source, debian/source/format: - add this back in (got a fix for release scripts) -- Dustin Kirkland Thu, 02 Jun 2011 17:43:23 -0400 powernap (2.8-0ubuntu1) oneiric; urgency=low [ Andres Rodriguez ] * Switch to dpkg-source 3.0 (quilt) format * Switch to dh_python2 instead of dh_pycentral * sbin/powernap: ACTION_METHOD is now passed as an argument. * Second Stage Action Method (LP: #711521) - config: Add config options. - powernap/powernap.py: Add loading of config values. - sbin/powernapd: Add logic to handle second stage action. [ Dustin Kirkland ] * config: remove trailing whitespace * debian/source/format, === removed directory debian/source: - drop these for now, as they're breaking the release scripts -- Dustin Kirkland Thu, 02 Jun 2011 16:51:20 -0400 powernap (2.7-0ubuntu1) oneiric; urgency=low [ Jim Heck ] * DiskMonitor: Tracks disks activity by monitoring its state. If "standby/sleeping" they are assumed to be inactive. (LP: #738764). [ Mathieu Bérard ] * actions/kms_powermode: Add action method to enable power management for radeon kms driver. Should be removed when applied upstream or pm-utils. [ Andres Rodriguez ] * sbin/powernapd: Take recover action when entered to powersave with powernap-now (LP: #768598) [ Dustin Kirkland ] * powernap/monitors/LoadMonitor.py: scale monitors correctly, LP: #777361 -- Dustin Kirkland Wed, 04 May 2011 14:44:50 -0500 powernap (2.6-0ubuntu1) natty; urgency=low [ Andres Rodriguez ] * debian/copyright: Update upstream authors and license years. * powernap/monitors/IOMonitor.py: If processes do not have a command line, search regex in the 'Name:' field of /proc//status (LP: #735452) * actions/cpu_frequency: Fix saving/restoring of wrong governor (LP: #743682) Thanks to Mathieu Berard for the patch. - Additionally, save 'ondemand' as default when acpi-support and ondemand are run on boot to handle special case when running on battery. * debian/powernap.{preinst,postinst}: Add logic to handle the upgrade of the config file as format has changed. (LP: #744588) - install copy of config file in /usr/share/powernap to help with this. -- Dustin Kirkland Fri, 01 Apr 2011 17:21:48 -0500 powernap (2.5-0ubuntu1) natty; urgency=low [ Andres Rodriguez ] * Add support to load confs from /etc/powernap/config.d. Added to leverage compatibility with other applications, such as Eucalytpus. (LP: #711587) -- Dustin Kirkland Mon, 14 Mar 2011 17:37:16 -0500 powernap (2.4-0ubuntu1) natty; urgency=low [ Andres Rodriguez ] * Fix wall message timestamp (LP: #718242) * Add powerwake-now support. Sends signal to powernapd to wakeup powersave mode if the daemon is in powersave. * debian/powernap.upstart: Add pre-stop. - Issues 'powerwake-now' to wake up system if stopping while in powersave. - Add 'sleep 3' to wait for recover action to take place before actually stopping powernapd. Otherwise, it won't recover. * bin/powernapd: Set flags back to initial values if GRACE PERIOD completed. Ensures that flags have correct values if powerwake-now signal was received. [ Dustin Kirkland ] * sbin/powernapd: only display wall message if action is other than powersave -- Dustin Kirkland Thu, 17 Feb 2011 07:36:20 -0600 powernap (2.3-0ubuntu1) natty; urgency=low [ Andres Rodriguez ] * config,sbin/powernapd,powernap/powernap.py: New option to decide if powernapd will WARN the user via a wall message. Default yes. * sbin/powernapd: Use a Timestamp when sending the wall message. * InputMonitor now only enables/disables keyboard and mouse monitoring. - powernap/monitors/InputMonitor.py: Match regex in /by-id for kbd. - powernap/powernap.py: Support only mouse/keyboard - config: Only add options for mouse/keyboard. * Enabled InputMonitors by default. - config: Enable. - powernap.py: Only try to initialize if "mouse" or "kbd" are connected by looking into /dev/input/by-id. * powernapd: Add SIGIO handler. Ignores failure caused when disconnecting a monitored USB InputDevice, that caused powernapd to stop running. [ Dustin Kirkland ] * man/powernap-action.8, man/powernap_calculator.1: fix lintian warnings, escpae hyphens * debian/control: update package descriptions -- Dustin Kirkland Tue, 08 Feb 2011 23:10:40 -0600 powernap (2.2-0ubuntu1) natty; urgency=low [ Andres Rodriguez ] * actions: - cpu_smp_sched,eth_wol: Dropped. pm-utils provides its own verion. - cpu_frequency: Store default governor to reset it to default value. * debian/rules: run dh_installdeb *after* dh_pycentral. * Add lintian-overrides (LP: #706974) * sbin/powernap: Fix pm-powersave command path. -- Dustin Kirkland Fri, 28 Jan 2011 10:46:38 -0600 powernap (2.1-0ubuntu1) natty; urgency=low [ Andres Rodriguez ] * config: - Default ACTION to pm-powersave instead of best-effort. - Enable WoLMonitor and ConsoleMonitor by default - Disable ProcessMonitor by default. - Change powersave defaults to 0 instead of 4. Update related files. * powernap/monitors: - Rename RemoteMonitor to UDPMonitor. - Add WoLMonitor and support to run it. - Add ConsoleMonitor and support to run it. * powernap/powernap.py: - Improve config loading method for Monitors. * sbin/powernapd: Change approach of powernapd_loop. - GRACE period is time between ABSENT_SECONDS and (ABSENT_SECONDS - GRACE_SECONDS) - Only send a Wall message when on GRACE Period. - Enable Monitors to run at all times. Specifically when in PowerSave. * man/powernapd.8: Update to list available Monitors with description. * Update Copyright years/email in some of the files. [ Dustin Kirkland ] * config, powernap/monitors/TCPMonitor.py, powernap/powernap.py: - add a TCP Monitor * config, powernap/monitors/LoadMonitor.py, powernap/powernap.py: - add a system Load Monitor * debian/control: bump standards version * debian/rules: make sure powernapd starts on install, LP: #705959 * config: update service restart method -- Dustin Kirkland Thu, 27 Jan 2011 16:38:22 -0600 powernap (2.0-0ubuntu1) natty; urgency=low [ Andres Rodriguez ] * powernap/monitors: Re-work Monitors to integrate them with PowerNap. * powernap/powernap.py: Minor fixes to not crash when loading monitors. * sbin/powernapd: Integrate Monitors approach to work with Daemon. * Update copyright headers for some files * Update manpages and add one for powernap-action. * Update packaging: - debian/control: Add python related fileds. - debian/rules: Add dh_pycentral related rules. * Add new package to contain new modules and monitors: - debian/control: Add package powernap-common. - debian/powernap-common.install: Install new files (PowerNap class and Monitors); Move action scripts installation to this package. * sbin/powernapd: Improve WoL monitor to listen in eth* interfaces. * config: Update and cleanup. * sbin/powernapd,bin/powerwake: Fix generation of WoL Magic Packet. Apparently, more data than required was addeed. (LP: #705943) -- Dustin Kirkland Sat, 22 Jan 2011 09:09:04 -0600 powernap (1.12-0ubuntu1) natty; urgency=low [ Andres Rodriguez ] * Revert Adam changes to some files (rev148 - Original PowerNap behavior) - powernapd, powernapd.8, action, config. * Re-organize the source and update the packaging: - sbin: Moved powernap, powernapd, powernapd-now. - bin: Moved powerwake, powernap_calculator. - man: Moved manpages here. - debian/{powernap,powerwake}.install: Update accordingly. - debian/{powernap,powerwake}.manpages: Update accordingly. - powernap/monitors: Moved Adam's Monitors. * Add new powersave method, using pm-powersave: - actions/: Add a set of scripts to reduce power consumption - powernap-action: Add tool to enable/disable and list powersave actions. - debian/powernap.install: Install new files. * Provide ability to select a PowerNap method to perform. - config: Add config variable to select method. - powernap/{powernap,powernapd}: Make necessary changes. * Add WoL monitor to 'wake up' for when 'pm-powersave' action is taken. - sbin/powernapd: Add WoL Monitor. - sbin/powerna: Take pm-powersave action correctly. * Add class to handle config: - powernap/powernap.py: Add class that handles config and initialization of different monitors -- Dustin Kirkland Tue, 11 Jan 2011 12:59:13 -0600 powernap (1.11-0ubuntu1) natty; urgency=low [ Adam Sutton ] * reworked config file and config file parsing * modularized the monitoring to a set of logical plugins * added a monitor on a UDP port for staying awake [ Nobuto MURATA ] * powerwake_completion: add bash completion from $HOME/.cache/ethers, LP: #675445 * debian/powernap.upstart: fix LP: #598241 cannot enable Wake-on-LAN when ifconfig output is translated [ Dustin Kirkland ] * powerwake: test if home dir is writable (might not be, eg: www-data) -- Dustin Kirkland Wed, 17 Nov 2010 17:15:25 -0600 powernap (1.10-0ubuntu1) maverick; urgency=low [ Nobuto MURATA ] * debian/powerwake.install, powerwake_completion: add bash completion for powerwake, LP: #551073 [ Dustin Kirkland ] * powerwake: create the ~/.cache/ethers file, if it does not already exist, LP: #582381 -- Dustin Kirkland Tue, 18 May 2010 12:33:32 -0500 powernap (1.9-0ubuntu1) lucid; urgency=low * debian/powernap.upstart: fix LP: #531950 - fix ethtool regex - allow for admin customized ethtool script, when powernap's is incorrect or undesired -- Dustin Kirkland Thu, 04 Mar 2010 11:04:49 -0600 powernap (1.8-0ubuntu1) lucid; urgency=low * powerwake: - test ethers file for writability, LP: #458163 - since non-priv users cannot write to globally cached ethers, support local user eth caches * powernap-now, debian/install: - add a powernap-now utility, for sending the 'now' signal to the daemon * debian/powernap.manpages, powernap-now.8: - add powernap-now manpages * debian/powernap.init, debian/powernap.upstart, debian/rules: - upstart-ify powernap -- Dustin Kirkland Sat, 06 Feb 2010 22:34:34 -0600 powernap (1.7-0ubuntu1) karmic; urgency=low * debian/powernap.init: enable WoL at boot on interface(s) that support wake-on-lan, to ensure that a powernapping system can be awoken later, LP: #445950 -- Dustin Kirkland Wed, 19 Aug 2009 00:19:13 -0500 powernap (1.6-0ubuntu1) karmic; urgency=low [ Dan Nurmi ] * powerwake: add support for a broadcast argument, add getopt support [ Dustin Kirkland ] * powerwake.1: updated to handle Dan's extensions and new arguments * powernap_calculator, powernap_calculator.1: new script to help determine the expected power savings usings powernap in a cloud environment; manpage documentation added * debian/powernap.logrotate: rotate the powernap log * powernapd: overhaul powernap's logging using python's built-in logging functionality * debian/control: bump standards version -- Dustin Kirkland Tue, 18 Aug 2009 19:12:43 -0500 powernap (1.5-0ubuntu1) karmic; urgency=low * powerwake: handle more gracefully the lack of an /etc/ethers file * powernapd: fix timestamp -- Dustin Kirkland Fri, 10 Jul 2009 17:37:54 -0500 powernap (1.4-0ubuntu1) karmic; urgency=low * powerwake: maintain and use a cache of mac addresses, in /var/cache/powerwake/ethers; test is_mac() before adding to arp hash * debian/powerwake.dirs, debian/powerwake.install, debian/powerwake.postinst, debian/control: add a separate powerwake package * debian/manpages, debian/powerwake.manpages: added manpage debhelper files * debian/control: recommend ethtool, which might be necessary to enable wake-on-lan on your ethernet card, powernap depends on pm-utils * powernap -> powernapd, debian/init, debian/install: rename the python powernap daemon 'powernapd' * powernap.1 -> powernapd.8: renamed, note ethtool * powernap: new script that will either take a specified action, or run one of (pm-suspend, pm-hibernate, poweroff) * powernap.8: document new script * action: conffile describing what should go there * debian/init: drop stdout on 'now' status check * debian/*: use powernap.* and powerwake.* to remove any ambiguity * powernapd: look for activity on /dev/* consoles and in /proc/interrupts during the grace period, such that any activity will cancel the powernap operation * powerwake, powerwake.1: update to allow for static configuration override in /etc/ethers -- Dustin Kirkland Thu, 09 Jul 2009 17:28:44 -0500 powernap (1.3-0ubuntu1) karmic; urgency=low * config: add default value statement to each item; add sane defaults; add grace period section * powernap: add a system-wide warning message using 'wall', and a grace seconds interval to cancel the operation of 60 seconds (by default); move to using global variables for options defined in the config file * debian/control: depend on bsdutils for 'wall' utility -- Dustin Kirkland Mon, 29 Jun 2009 14:49:55 -0700 powernap (1.2-0ubuntu1) karmic; urgency=low * config, debian/control, powernap.1, powernap.py: lower the default polling period from 10 seconds to 1 second; polling /proc is cheap, and empirical testing has shown a negligible performance impact; add a note about DEBUG * powernap.py -> powernap: - abstract take_action() to a function, add a handler for --now - daemonize within the python script - eliminate the shell wrapper - log to /var/log/powernap.* - add signal handling for "now", USR1 * powernap.1: add log files * debian/init: add 'now' action and signal passing * powerwake: initial cut at powerwake utility * powerwake.1: initial cut at powerwake documentation -- Dustin Kirkland Fri, 26 Jun 2009 17:23:22 -0500 powernap (1.1-0ubuntu1) karmic; urgency=low * debian/copyright: updated for Ubuntu inclusion -- Dustin Kirkland Fri, 12 Jun 2009 12:53:54 -0500 powernap (1.0-0ubuntu1) karmic; urgency=low [ Initial release ] * powernap: shell wrapper script * powernap.py: python daemon * config: global configuration file * powernap.1: manpage documentation -- Dustin Kirkland Thu, 11 Jun 2009 17:30:16 -0500