* No change rebuild.
* Build with -O2, to avoid segfault on ppc64el.
* Convert remaining symlinks (Closes: #875911)
* Push Standards-Version to 4.1.1. No changes required.
* Convert old symlink to directory in libplplot-dev
* Install all packages for CI test (still fails, however)
* Fix version number in maintscript.
* Move plserver program to plplot-tcl-bin package and /usr/bin
* Add CMake plplot config files to libplplot-dev
* Disable ocaml tests on MIPS completely
* Adjust Multi-Arch according to hinter
* Fix symlink->directory change command in installer scripts
* Fix ocaml dependencies
* Completely disable x22ocaml test. (Closes: #876485)
* Fix python libraries for different python versions
* Finally make all occaml test failures non-fatal
* Switch back to unstable
* Disable more failing ocaml tests: x16ocaml, x22ocaml
* Fix CI test subdir name
* Merge patches from Ubuntu
* Convert symlinks from old packages to directories on upgrade
(Closes: #875913)
* Disable failing test x09ocaml
* New maintainer and debian-science team maintenance. Closes: #867049
* Convert repository to git
* Push Standards-Version to 4.1.0
* Update maintainer and URLs in d/control and d/copyright
* New upstream version 5.13.0+dfsg. Closes: #873998, #807016
* Switch to experimental. Prepare transition for new SONAMEs
* New/re-enabled bindings: ocaml, ada, python3, python3-qt, octave
* Disable OCaml Cairo bindings (not built upstream by default)
* Split CSIRO package in to nn and csiro packages
* Update license of csiro and nn libraries. Closes: #500687
* Use Qt5 instead of Qt4. Closes: #875101
* Separate wxwindows and Qt driver from bindings
* Reformat patches for gbp
* Simplify debian files. Revert preprocessing for d/control.in
* Fix dependencies. Closes: #787818
* Remove Multi-Arch from plplot-tcl. Closes: #762736
* Install unprocessed examples. Closes: #762735, #762737
* Add build time tests
* Initial d/u/metadata
* Added Build-bindings-for-all-Python-versions.patch
* Non-maintainer upload.
* Fix FTBFS with cmake >= 3.6.2. Closes: #835708
* Non-maintainer upload.
* Fix FTBFS with "dpkg-buildpackage -A" by letting build-indep-stamp
depend on config-stamp in debian/rules. (Closes: #816987)
* Non-maintainer upload.
* Switch enabling/disabling of D and Octave support to slice +
debian/control.in instead of commenting. Allow to disable ADA support
completely (not only for sh4) that way, too.
* Disable ADA and D support which currently FTBFS. (Closes: #809592)
* Update debian/control from debian/control.in with "debian/rules
control".
* Replace out-dated debian/README.source with according instructions.
[ Axel Beckert ]
* Non-maintainer upload.
* Repack upstream tarball to no more include non-free image lena.*.
+ Add patch to remove handling of lena images from multiple files.
+ Add according Files-Excluded header to debian/copyright.
+ Fixes lintian-reported error license-problem-non-free-img-lenna.
+ Closes: #794857
* debian/copyright: Add missing path element in URL in Source field.
Issue found by DUCK.
* Add build-dependency on dh-python to fix FTBFS in
bindings/python/CMakeFiles/plplot_widgetmodule.dir/plplot_widgetmodule.c.o.
[ Peter Michael Green ]
* Apply upstream patch to fix build with cmake 3.1 (Closes: #789619)
* Disable octave support as it's currently broken
+ see my post to bug #789619 for further info on the error
+ debian/rules and debian/control changes adapted from 5.10.0-0ubuntu5
package by Matthias Klose
+ also moved liboctave-dev build-depends to build-conflicts as
upstream buildsystem was trying to build octave stuff even without
debian/rules telling it to.
* Add tcl8.6 and tk8.6 to build-conflicts, having multiple versions of
tcl/tk arround seems to break the build.
* Repackage upstream source to remove non-DFSG compliant documentation.
This is regenerated automatically anyway. Fixes lintian errors.
* debian/watch: Update watch file to account for mangled version with
+dfsg suffix. Avoids lintian warning.
* debian/rules, debian/repack: Add target to automatically download
and clean up source to remove non-DFSG compliant code.
* debian/README.Debian: Document changes to make the package DFSG
compliant.
* debian/patches/fix_config_h_clash: New patch from upstream to fix name
clash with HAVE_CONFIG_H. (Closes: #761176).
* debian/copyright: Update to use new machine readable format, and to
include fuller details of files which have different licensing
conditions to the standard LGPL. (Closes: #761057)
* debian/control.in: Include libplplot-dev dependencies on
plplot12-driver-qt and plplot12-driver-wxwidgets to avoid dangling
symlinks. (Closes: #715105). Change build dependency on
ttf-freefont transitional package to fonts-freefont-ttf.
* debian/patches/set_cmake_policy: Set cmake policy CMP0026 to old to
allow compilation with cmake 3. For installed examples also set cmake
policy CMP0046 to old to suppress warnings.
* debian/patches/octave_3.8_support.diff: Fix bug introduced in octave
example 07.
[Thibaut Paumard <thibaut@debian.org>]
NMU to fix remaining issue, based on package proposed for sponsorship by
original maintainer:
* Bug fix: "plplot FTBFS due to HDF5 transition", thanks to Thibaut
Paumard (Closes: #760943) (new patch: dont-check-for-hdf5_h)
[Andrew Ross <andrewross@users.sourceforge.net>]
* New upstream version (closes: #740085, #707268, #713309, #736392, #747053,
#719799)
* debian/patches/: Remove patches now in upstream and update remaining
patches.
* debian/patches/octave_3.8_support.diff: Fix some issues with octave 3.8
support (backport from upstream). Also remove obsolete continuation
markers to suppress octave warnings.
* debian/rules, debian/control.in: Use xvfb-run to run cmake since
auto-detection of tk components requires an X11 display and may fail for
autobuilders. Add the required build dependencies on xvfb, xauth and
iwidgets4.
* debian/get-upstream-version.pl: Update to reflect changes in how the
plplot version is stored in the upstream source.
* debian/rules, debian/control.in: Update arch-indep build dependencies and
remove references to postscript version of documentation to reflect
changes to the way documentation is built.
* debian/control.in: Update build dependencies to use wxwidgets-3.0 (closes:
#749488) and gnat-4.9 (closes: #728152)
* debian/rules: Add -source and -target options to javac command line. Fixes
lintian warning.
* debian/control.in: Bump standards version to 3.9.5. Fixes lintian warning.
* debian/patches/fix-wxwidgets-linkage.diff: Add new patch to explicitly link
libplplotd to libwxwidgetsd. Fixes dpkg-shlibdeps warnings.
* debian/changelog: Upload to experimental not unstable.
* debian/compat, debian/control.in: Update to compatibility version 9
for debhelper to remove lintian warning.
* debian/rules: Fix bug in rules for case where ada is not supported.
* debian/control.in: Fix short description for plplot-tcl-bin package.
* debian/rules: For tcl scripts in the tk examples then make symlinks rather
than duplicating files in the tck examples.
* New upstream release
* debian/patches/series: Remove backported patches no longer need with
current release and update remaining patches.
* debian/control.in: Update dependencies for new documentation build system
and to include shapelib (needed for new map support).
* debian/control.in, debian/rules, debian/*.files:
Rename packages to reflect bump in SONAME version.
* debian/control.in: Drop support for f77 bindings (deprecated upstream
and replaced by the better f95 bindings).
* debian/libplplot12.files: Ensure shape file versions of the maps are
installed.
* debian/control.in, debian/rule: Drop the gd driver support and the
plplot11-driver-gd package. No longer supported upstream and superceded
by cairo and qt drivers. (Closes: #738242)
* debian/patches/series, debian/patches/fix-d-examples.diff: Fix from
upstream for D example 20 so it compiles with latest gdc.
* debian/rules: Fix command line options for python-config to prevent an
error.
* debian/control.in, debian/rules, debian/*.files: Update package to be
multiarch compatible. (Fixes some lintian warnings).
* debian/rules: Force compatibility with java 5 (default on some platforms).
Fixes lintian warning.
* debian/patches/series, debian/patches/fix_python_exec_bit.diff: Fix
incorrect executable bit on python script. Fixes lintian warning.
* debian/libplplot-ada1.lintian-overrides,
debian/libplplot-fortran10.lintian-overrides,
libplplot-ocaml.lintian-overrides: Suppress hardening warnings for ada,
fortran and ocaml compiled code since they are not relevant.
* debian/control.in, debian/plplot-tcl-bin.files, debian/plplot-tcl.files,
debian/patches/series, debian/patches/add-tcl-multiarch.diff: Move
pltcl to a new plplot-tcl-bin package and move plserver to a location in
the library path (executable by the library not the user). Required to make
the tcl packages multiarch compliant.
* debian/patches/fix-cmake-ada-support.diff: Update ada support from
upstream to ensure plplot builds with latest Ada compiler in unstable.
* debian/rules: Update python library path.
* debian/patches/fix-cmake-d-support.diff: Add patch from upstream to
fix D language support.
* debian/patches/java-pltr2-fix.diff: Add patch from upstream to fix
crash in java examples using pltr2 (closes: #713309).
* debian/control.in: Bump standards version to 3.9.4.
* debian/control.in: Remove build dependency on quilt since this is
not required for 3.0 (quilt) source packages. Fixes lintian warning.
* debian/rules: Get CPPFLAGS using dpkg-buildflags to use fortified libc
functions. NB needs to work around cmake "feature" which ignores CPPFLAGS
at present. Fixes lintian warning.
* debian/patches/series, debian/patches/fix-cmake-ada-support.diff:
Add patch from upstream to fix cmake ada support with cmake 2.8.9 and later
(closes: #680841).
* debian/patches/series, debian/patches/fix-lua-includes.diff:
Add patch to work around problem with lua cmake support. Debian now requires
multiple include paths which were not found correctly. This prevents a FTBFS
with recent versions of lua5.1.
* Recompile with latest version of gfortran (closes: #683878).
* debian/rules:
+ Fix bug in building binary-arch target on autobuilders.
+ Remove workaround for executable permissions bug in 5.9.8.
[ Andrew Ross ]
* debian/control.in:
+ Bump standards version to 3.9.3.
+ Fix broken suggests package plplot11-tcl for libplplot11.
+ Remove reference to ada-compiler in libplplot-ada0-dev package as per new
Debian Ada policy. Fixes lintian warning.
+ Add note for fortran bindings package description that Fortran 77 support
is deprecated in the current upstream SVN and will be dropped in a future
release. New code should use the Fortran 95 bindings.
* debian/rules:
+ Tidy up obsolete / unneeded code.
+ Ensure CFLAGS, CXXFLAGS and LDFLAGS are properly exported to cmake. Add in
FFLAGS. -fvisibility=hidden and --as-needed should now work properly. The
latter fixes a lot of dpkg-shlibdeps warnings.
* debian/patches/series, debian/patches/08_nn_link_libm.diff: Add patch to
explicitly link nn library against maths library. Fixes dpkg-shlibdeps
warning.
* Rebuild python-plplot package against new version of numpy as part of the
numpy transition.
[ Rafael Laboissiere ]
* debian/control.in:
+ Build-depend on liboctave-dev
+ Drop build-conflict with octave3.0-headers
+ Depend directly on octave, instead of using the substitution
variable ${octave:Depends}
* debian/rules:
+ Set directly the Octave paths, instead of using defs.make
+ Drop the call to octave-depends
* Adjust the upstream code for working with Octave 3.6.1, by adding the
following patches:
+ debian/patches/replace-deprecated-split.diff
+ debian/patches/proper-path-handling.diff
+ debian/patches/fix-boolean-operators.diff
* debian/octave-plplot.files: The path in /usr/lib has now an
architecture triplet
[ Andrew Ross ]
* debian/patches/replace-deprecated-split.diff:
+ Fix use of split in the test_octave.sh test script as well. This plus
previous changes by Rafael fix octave-3.6 support (closes: #666708).
* debian/control.in: Add recommends on cmake for libplplot-dev since
this provides a better way of building the examples.
* Force rebuild to fix dependency problems with ada development library
and gnat-4.6 which make libplplot-ada0-dev uninstallable.
* Add explicit dependency on gdc-v1 as package is not yet ready for gdc
version 2 which is the new default with gdc-4.6 (closes: #653088).
* New upstream release.
* debian/patches/series: Remove patches from upstream which are included
in the new release.
* debian/control.in:
+ Add back in dependencies (rather than recommends) on the C++
and fortran libraries. This does pull in extra libraries if you
only wish to develop with one language, but reverts to the old
behaviour (closes: #642715).
* debian/control.in, debian/libplplot-ada0.files,
debian/libplplot-ada0-dev.files, debian/libplplot-dev, debian/rules,
debian/README.Debian:
+ Split off ada development files from libplplot-dev package into new
libplplot-ada0-dev package. Move .ali files from libplplot-ada into
libplplot-ada0-dev package as per Debian Ada policy. Add explicit
dependency on ada-compiler, gnat and gnat-4.6 as per policy.
(closes: #644105, #644110, #644112)
+ Rename libplplot-ada package to libplplot-ada0 so it includes the
library soversion as per Debian Ada policy.
* debian/control.in:
+ Change package priority to optional as per policy.
+ Add libplplot-dev dependency on libqsastime-dev (closes: #642146).
+ Fix description for libplplot-dev package (closes: #642122).
* debian/plplot-tcl-dev.lintian-overrides: Fix lintian overrides.
* New upstream release.
* debian/control.in: Bump standards version to 3.9.2.
* debian/NEWS: update NEWS file for 5.9.8.
* debian/control.in, debian/rules, debian/*.files:
Rename packages to reflect bump in SONAME version.
* Rebuild against gfortran-4.6 (closes: #635739).
* debian/rules:
+ Update to reflect changes in upstream ChangeLog file name.
+ Tidy up some old comments.
+ Change from calling ctest to using "make test_noninteractive"
to run the tests. Also include .NOTPARALLEL target to prevent the
rules makefile being parallelised. Instead pass -j options to the
plplot make files. This allows parallel builds to work correctly.
+ Fix a temporary permissions problem with test script in the 5.9.8
tarball.
+ Fix dependency generation for octave package.
+ Fix python build so that the installed example Makefiles are
properly configured.
* debian/rules, debian/control.in, debian/libplplot-ocaml.files:
Add new libplplot-ocaml package which includes the OCaml bindings.
* debian/rules, debian/control.in, debian/libplplot-lua.files:
Add new libplplot-lua package which includes the lua bindings.
* debian/rules, debian/control.in, debian/libplplot-d.files:
Add new libplplot-d package which includes the D language bindings.
* debian/rules, debian/control.in, debian/python-plplot-qt.files:
Add new python-plplot-qt package which includes the python bindings to
allow use of the plplot API in qt applications.
* debian/control.in:
+ Remove dependency of libplplot-java on default-jre as per policy.
Java libraries do not need to depend on a java runtime. Fixes
lintian warning.
+ Tidy up section / priority headers for the packages.
* debian/patches/series, debian/patches/08_oct_perms.diff,
debian/patches/09_qt_nodisplay.diff,
debian/patches/10_fix_test_scripts.diff,
debian/patches/11_ocaml_library_location.diff,
debian/patches/12_qt_unload_fix.diff
+ Add new patch to turn off execute permissions for plplot_octave.oct
(fixes lintian error).
+ Add patch from upstream to enable non-interactive qt devices to work
even if DISPLAY is not set (prevents error when running tests on a
buildd / using pbuilder).
+ Add new upstream patch to remove spurious chmod commands from test
scripts. This ensures the installed examples will work as expected.
+ Add new upstream patch to change the install location for OCaml
libraries to remove the OCaml version (as per Debian OCaml practice)
and to remove the execute permissions for the stublibs.
+ Add temporary workaround from upstream to prevent crash on exit with
the qt driver and Qt-4.7.3.
* debian/copyright: Make explicit that the license is LGPL-2 (fixes
lintian warning). Update consistent with upstream copyright file.
* debian/control.in, debian/rules, debian/libqsastime0.files,
debian/libqsastime-dev.file:
Split libqsastime off into separate library and devel packages.
* debian/libplplot-dev.files, debian/libplplot-fortran9.files:
Move fortran .h and .mod files to the libplplot-dev package as these
are required for compiling fortran with plplot and not for runtime.
* debian/plplot-tcl-dev.lintian-overrides: Add lintian override for
informational warning about interpreter path not being absolute.
* debian/rules: Add -fvisibility=hidden to CFLAGS and -Wl,--as-needed
to LD_FLAGS to only export required symbols and prevent linking in
unnecessary libraries. Reduces the dependency requirements,
particularly for the drivers.
* New upstream release (closes: #564216).
* debian/rules: remove -DHAVE_PTHREADS=ON option as it is on by default.
Option name is also likely to change in future releases.
* debian/control.in, debian/rules, debian/python-plplot.files: change from
using dh_pycentral to dh_python2 (closes: #616942). Also fixes lintian warning.
* debian/control.in: minor tweaks to package descriptions.
* New upstream release.
* debian/patches/series:
+ Remove the following patches which are included upstream
11_minus-sign-manpage.diff
16_wxwidget-with-cmake-2.8.diff
17_fix_cmap_support.diff
18_update_cmake_fortran.diff
and delete the patches from the patches directory.
+ Comment out 07_octave_prune_examples.diff from the list of applied
patches, but leave patch for now to see if octave example p7 is ok
on alpha.
+ Update remaining patches for 5.9.6.
* debian/control.in: drop plplot-bin package altogether as all these scripts
are now obsolete.
* debian/control.in, debian/rules, debian/plplot9-driver-qt.files:
Add new plplot9-driver-qt package which includes the qt driver and bindings.
* debian/source/format: Add file to select 3.0 (quilt) format for the package.
Fixes lintian warning.
* debian/NEWS: update NEWS file for 5.9.6.
* debian/rules, debian/control.in: update to use dh_numpy in debian/rules
to get versioned numpy support. Requires python numpy >= 1:1.1.4.1-4~
(closes: 590770).
* debian/control.in: Bump standards version to 3.9.1.
* debian/control.in, debian/plplot-bin.files: remove references to plrender
in package descriptions (no longer included) and also remove plpr / plm2gif
scripts which rely on plrender.
* debian/control.in: Fix spelling mistake in cairo driver package
(closes: 592970)
* debian/patches/18_update_cmake_fortran.diff: Remove plplot workaround for
cmake fortran support as this is no longer needed with cmake 2.8.2 and
causes errors building the f77 and f95 libraries.
* debian/control.in:
+ Remove Rafael Laboissiere from the list of uploaders as he has
now retired from Debian (closes: #571874).
+ Bump Debian standards version to 3.8.4.
* debian/control.in, debian/rules: Correctly disable ada support for
sh4 (closes: #572028). Enable ada support on armel now that gnat is
available (closes: #568451).
* debian/rules: Force tclsh to /usr/bin/tclsh8.5 - avoids problems if
tcl8.4 is also installed so /usr/bin/tclsh points to a different
version.
* debian/patches/17_fix_cmap_support.diff, debian/patches/series: Add
bug fix patch from upstream to fix cmap palette support. This fixes
the blank pages in the ada examples (and possibly user code).
* debian/control.in: Update to use octave3.2 - octave 3.0 will shortly be
dropped.
* debian/rules: explicitly enable jpeg, png and gif drivers as they are
now disabled by default. Eventually these will be replaced by cairo
and qt drivers, but keep them in for now until these packages have
settled down.
* New upstream release.
* debian/patches/series: Remove the following patches which are no longer
required as they are now included upstream
13_fix-kfreeBSD-build.diff
14_octave-3.0-fixes.diff
15_octave-toggle-plplot-use.diff
and clean up directory by deleting unused patches.
* debian/patches/02_unset-python-path.diff,
debian/patches/04_use-mkoctfile.diff,
debian/patches/07_octave_prune_examples.diff,
debian/patches/16_wxwidget-with-cmake-2.8.diff:
+ Update patches to work with plplot 5.9.5
* debian/control.in, debian/rules:
+ Properly enable support for ada on all architectures (except armel)
- build dependencies were not updated.
+ Add sh4 to the list of architectures where gnat is not available and
so ada support is disabled. (closes: #562238)
+ Drop the plplot9-driver-gnome2 package which is unmaintained
upstream and depends on libgnomeprintui-2.2 which is to be dropped
from Debian. (closes: #542577)
+ Ensure ghostscript is installed in Build-Depends-Indep: since this
is needed to generate fonts for pdfjadetex, but is not automatically
pulled in.
* debian/rules: Remove setting of ITCL_LIBRARY which is not required
with latest version of itcl.
* debian/libplplot9.files: Ensures .pal palette files are correctly installed
* Rebuild package to use latest versions of gfortran (closes: #564065)
and python (closes: #562411)
* debian/patches/02_unset-python-path.diff: Fix offset in patch
to remove quilt warning. (closes: #538533)
* debian/control.in:
+ Remove arm build dependency on g++-4.1. (closes: #533806)
+ Update build dependency on tcl / tk to 8.5 (compatible with
latest itcl). (closes: #545302)
+ Add dpkg (>=1.15.4) | install-info dependency for plplot-doc to correctly
handle info install triggers. Fixes lintian warning.
+ Bump debian standards version to 3.8.3.
+ Fix typo in java bindings package description. (closes: #557677)
+ Add ${misc:Depends} to all binary package dependencies. Fixes lintian
warning.
* debian/control.in, debian/rules:
+ Update java to build-dep on default-jdk and runtime depend on default-jre
which should work for all architectures.
+ Update ada packages so built on all architectures except armel where gnat
seems to be unavailable. (closes: #544187)
* debian/patches/16_wxwidget-with-cmake-2.8.diff: New patch ported from
upstream to fix wxwidget build with cmake 2.8.0.
* debian/control.in: Bump wxgtk version to 2.8. Require cmake 2.8.0 to build.
* debian/control.in: Ensure libplplot-dev only depends on
libplplot-ada for architectures where that exists.
(closes: #530847)
[ Andrew Ross ]
* debian/compat, debian/control.in: Update compatibility version for
debhelper to remove lintian warning.
* debian/control: Change section for libplplot9-java to match
override in debian archives. Fixes lintian warning
* debian/patches/15_octave-toggle-plplot-use.diff:
New patch ported from upstream to fix namespace clash in the
toggle_plplot_use.m script. (closes: #525198)
* debian/plplot-doc.postinst, debian/plplot-doc.prerm:
Remove obsolete scripts. Handling of index updates for info
file installs is now done automatically by dpkg. Removes
lintian warning.
* debian/control.in: Update package descriptions to fix lintian
warnings.
* debian/patches/14_octave-3.0-fixes.diff:
New patch ported from upstream to fix octave with octave 3.0.
Patch removes support for octave 2.0/2.1 which gets rids of a
large number of warnings. Also fixes automatic_replot support.
(closes: #522423)
* debian/rules: Disable OCaml support to prevent OCaml bindings
being build if ocamlc is installed.
[ Rafael Laboissiere ]
* debian/control (libplplot-dev): Depend on libplplot-fortran9
libplplot-ada, avoiding dangling symlinks (closes: #522125)
* debian/control.in: Bump Standards-Version to 3.8.1 (add needed file
debian/README.source explaining the patch system)
* New upstream release. Closes: #517233.
* debian/patches/series: Remove patches
09_pdftex-EC-encoding.diff
10_print-usage-octave-3.0.diff
12_cmake-2.6-fixes.diff
which are now incorporated upstream.
* debian/patches/07_octave_prune_examples.diff:
Update patch to reflect upstream changes.
* debian/patches/13_fix-kfreeBSD-build.diff:
debian/control.in:
New patch to fix build of plplot on Debian kfreeBSD. Also disable
ada packages on kfreeBSD-amd64. Closes: #497895.
* debian/rules: Explicitly enable tk driver. This is current disabled
upstream as there are some issues with segfaults for the interactive
tests. Use at your own risk until patches are forthcoming.
* Switch from dpatch to quilt
[ Andrew Ross ]
* debian/rules:
+ Fix use of findstring in debian/rules which prevented java
building on i386 (closes: #483826)
* Add dpatches
12_cmake-2.6-fixes: Fixes build with cmake 2.6 now in sid. This
patch is taken from svn upstream. (closes: #482236)
[ Rafael Laboissiere ]
* debian/control.in: Bump Standards-Version to 3.8.0 (no changes needed)
* debian/control.in, debian/rules:
+ Build-depend on default-jdk-builddep instead of java-gcj-compat-dev
and prevents building of the libplplot9-java package on alpha, hppa,
and hurd-i386 (closes: #477902)
+ Prevent libplplot-ada of building on armeb and armel (closes: #478891)
* debian/control.in, debian/rules: Disable building of the Ada binding
on alpha
[ Andrew Ross ]
* debian/control.in: Make it clear that the ada bindings are still
experimental
[ Rafael Laboissiere ]
* debian/control.in, debian/rules: Do not build the Ada binding on mips
and mipsel
* debian/control.in:
+ Renamed from debian/control.
+ Build-depend on slice
+ Build-depend on gnat-4.1 on alpha, mips, and mipsel, since gnat-4.3,
the default Ada compiler in Debian unstable, has issues on those
architectures
* debian/rules:
+ Do not issue commands related to the libplplot9-java and
libplplot-ada packages on arm
+ Process debian/control.in through the slice command to produce a
debian/control file with some packages excluded for some
architectures (currently, libplplot9-java and libplplot-ada are
excluded for arm)
* debian/control: Build-depend on g++-4.1 on arm, otherwise mkoctfile
fails on this architecture
* debian/rules: Set variable DEB_BUID_ARCH using dpkg-architecture
[ Andrew Ross ]
* debian/control, debian/rules: Disable ada support for arm. The
gnat compiler is not available on the arm architecture. The
libplplot-ada package will be empty on this architecture.
[ Rafael Laboissiere ]
* Rebuilt against new libffi-dev, such that the python-plplot package
will depend on the new libffi5 (closes: #472166)
* debian/patches/11_minus-sign-manpage.dpatch: Escape "-" signs that
mean the "minus" character in plserver man page
* debian/plplot-doc.doc-base: Set section to Science/Mathematics
[ Andrew Ross ]
* New upstream release
* debian/patches/00list: Remove patches
05_octave_documentation.dpatch
06_build_dir_use_physical_path.dpatch
08_fix_cxx_includes.dpatch
as they are now included upstream
* debian/rules, debian/control, debian/libplplot-ada.files,
debian/liplplot-dev.files:
Add new package libplplot-ada to contain the Ada bindings. Include
examples and source in with the libplplot-dev package (following
Ada policy).
* debian/libplplot9.README.Debian: Update to include new ada
bindings package.
[ Rafael Laboissiere ]
* debian/control:
+ Fixed capitalization of GNOME (Lintian warning)
+ Force build-dependency on octave3.0 >= 3.0.0-2, ensuring the
transition from g77 to gfortran. Also, drop the unnecessary
build-dependencies on blas, atlas, and lapack, since they are pulled
in by octave3.0.
* Add dpatches:
+ 09_pdftex-EC-encoding: Include the correct ec.enc file for the EC
encoding, such that ligatures like "ff" and "fi" display correctly
in the PDF form of the documentation (closes: #461343)
+ 10_print-usage-octave-3.0: Use the appropriate call to print_usage
in wrap_octave.pl when building against octave3.0
* debian/patches/04_use-mkoctfile.dpatch: Adjust for installing
plplot_octave.oct with the appropriate execution permissions,
otherwise dpkg-shlibdeps does not work correctly for the octave-plplot
package
[ Andrew Ross ]
* debian/rules, debian/control, debian/libplplot9.README.debian: Disable java
on arm platform. Currently java-gcj-compat-dev is out of date on that
architecture. Instead the libplplot9-java package will be empty on arm.
[ Rafael Laboissiere ]
* debian/control:
+ Force build-dependency on python-numpy to be >=1.0.4-4, because the
previous version had the include files installed in the wrong
directory
+ Build-depends on octave3.0-headers instead of octave2.9-headers
* debian/patches/01_check-for-octave2.9.dpatch: Adapted for also
accepting Octave 3.0
* debian/rules: Adjusted path of numpy include files, which are now in
/usr/include/numpy
[ Andrew Ross ]
* debian/patches/08_fix_cxx_includes: Add patch to fix the include files for
the c++ examples. This patch should ensure the examples build with gcc 4.3.
(closes: #456040)
* debian/control: Add Build-Depends-Indep section for those packages
only used in building the documentation. Reduces package dependencies
for autobuilders.
[ Rafael Laboissiere ]
* debian/control: Tighten build-dependency on libqhull-dev to version
equal or greater 2003.1-8 because versions previous to that one were
terribly broken.
* debian/rules: rewrite the rules so the documentation is only built for
binary-indep targets. This save significant time for the autobuilders.
[ Rafael Laboissiere ]
* debian/control:
+ Dropped the Homepage pseudo-header from the extended descriptions
+ Bumped Standards-Version to 3.7.3
[ Andrew Ross ]
* debian/patches/07_octave_prune_examples.dpatch: Remove example p7 from the
ctest tests for the octave bindings. Currently this test fails on alpha
in a way that fills the disk partition.
* debian/rules: add -VV option to ctest. Will make it easier to debug
any failed tests for auto-built packages.
* debian/patches/06_build_dir_use_physical_path.dpatch: Ensure that plplot
correctly identifies when run in the build tree, even if the path
involves symlinks.
* New upstream release.
* debian/rules: use cmake to get version information rather than configure.ac.
Autotools build is now obsolete.
* debian/control: correct libplplot9 suggests - correct package names are
plplot9-driver-cairo and plplot9-driver-wxwidgets.
* debian/libplplot9.README.Debian: Update to reflect changes to
octave-plplot and replacement of psttf driver with cairo driver.
* debian/patches/03_tclIndex-src-tree.dpatch: Dropped patch (applied
upstream).
* debian/patches/05_octave_documentation.dpatch: Improve the usage
documentation of octave-plplot, in particular for users of octave2.9
(closes: #453128).
* debian/control: Build-depends on java-gcj-compat-dev and make the
libplplot9-java package depend on java-gcj-compat. It seems that the
Java binding only work well with gcj/gij. This should fix the
autobuild failures related to the Java binding (closes: #451103)
* debian/rules: Set the appropriate JAVA_HOME according to the above.
* Added Cairo driver and dropped psttf driver, making the former
replace/conflict with the later
[ Andrew Ross ]
* New upstream release. The pstex driver is not support anymore
(closes: #415303).
* New maintainer (closes: #396999)
* debian/control, debian/rules: Fix python settings to work with
numpy rather than Numeric.
* debian/patches/01_check-for-octave2.9.dpatch: Renamed from
01_check-for-octave2.1 and adapted for octave2.9
[ Rafael Laboissiere ]
* debian/control:
+ Made octave-plplot depend on libplplot9, otherwise a broken symlink
may show up in /usr/share/doc
+ Build-depend on octave2.9-headers instead of octave2.1-headers.
Also, build-conflict with the later.
+ Updated description of plplot-bin package, since support for plmeta
and pstex is not enabled by default
+ Replaced the deprecated variable ${Source-Version} by
${binary:Version}
+ Added Homepage, Vcs-Svn, and Vcs-Browser fields
+ Added me as an uploader
* debian/rules:
+ Do not set the RPATH when building shared libraries
+ Set the environment variable ITCL_LIBRARY when calling ctest, such
that the examples_tcl test passes
* Added dpatches:
+ 03_tclIndex-src-tree.dpatch: Ensure tk/tclIndex is generated in the
build tree and not in the source tree
+ 04_use-mkoctfile: Build plplot_octave.oct using mkoctfile and not as
a shared library
* debian/plplot9-driver-wxwidgets.files: Move libplplotwxwidgetsd.so*
into the plplot9-driver-wxwidgets package
* debian/control, debian/rules: Fix python packages to work with
cmake build system.
* debian/control, debian/rules: Re-enable the libplplot9-java package.
Now uses jikes / kaffe to build.
* debian/control: Tidy up dependencies and include dependencies for
building documentation from source.
* debian/libplplot9.README.Debian: Update list to describe current
packages.
* Initial port of debian packaging files to use new cmake build system
* QA upload.
* Fix missing section on the plplot-bin package, causing build failures on
some (!) architectures.
* QA upload.
* debian/patches/51_remove-no-force-mem.dpatch: Remove `-fno-force-mem',
which is a no-op with GCC 4.1+, and unsupported with GCC 4.3.
Closes: #415278.
* debian/watch: Update upstream URL.
* Orphaning the package
* debian/control: Changed the maintainer to the Debian QA Group
* debian/control: Applied patch from Tomas Pospisek tomake list in
description render nicely in aptitude (closes: #389142)
* debian/control, debian/rules: Do not build the libplplot9-java package
anymore, at least until the problems in building the PLplot Java
buildings in the autobuilders is fixed (closes: #384329)
* debian/patches/50_check-for-octave2.1.dpatch: Do string comparisons
instead of numeric comparisons on the value returned by
split(version,"."). Thanks to Thomas Weber the patch
(closes: #376247)
* debian/watch: Fixed http entry
* debian/rules: Install Perl examples in the libplplot-dev package
* debian/control: Removed build-dependency on pdl, which causes circular
dependencies because pdl depends on libplplot9. It is a bad thing to
require libplplot9 installed in order to build libplplot9.
* debian/rules:
- Dropped --enable-pdl from the list of options to configure
- Call the dh_movefiles command only after everything has been
installed in debian/tmp, including the python2.{3,4} specific stuff.
This will avoid build errors due to libraries being moved away from
debian/tmp/usr/lib (closes: #375396)
* debian/control: Build-Depends on python-numeric >= 24.2-3, because
this version is the first one built with python central. Previous
build dependencies on python2.{3,4}-numeric are removed.
* debian/control: Added ttf-freefont to Build-Depends, such that the
Freetype support is corectly switched on by configure and
compilation of drivers/gcw.c succeeds (closes: #375364)
* debian/control: Replaced all build-dependencies for java by
java-gcj-compat-dev, which will be default java environment for
building packages soon (thanks to Michael Koch <konqueror@gmx.de>
for the hint, closes: #370655, #372644)
* debian/rules: Set JAVA_HOME to /usr/lib/jvm/java-gcj
* The libcsiro0 package has now its own /usr/share/doc/libcsiro0
directory, eliminating the need for a symlink to
/usr/share/doc/libplplot9, which avoids the circular dependency
libcsiro0 <-> liplplot9 (closes: #342897)
* Following now the new Python Policy (closes: #373478):
- debian/control:
+ Build-Depends on debhelper >= 5.0.37.2, python-all-dev >=
2.3.5-11, and python-central >= 0.4.17
+ Added a XB-Python-Version field to the python-plplot package
+ Added a XS-Python-Version with value "all"
- debian/rules:
+ Added call to dh_pycentral
+ Generate the Python modules for versions 2.3 and 2.4 by calling
twice the configure script + make + make install in the newly
created rule install-python%
* New upstream release
* debian/watch: Added file
[changes for 5.6.0.rc1.5.6.1-2), not officially released]
* debian/patches/50_check-for-octave2.1.dpatch: Abort the
toggle_plplot_use script if using Octave other than version 2.1.*
(closes: #368753)
* debian/rules: Enable installation of the PDL examples
* debian/control: Build-depends on pdl
[changes for 5.6.0.rc1.5.6.1-1), not officially released]
* New upstream release candidate (5.6.1_RC1). This version contains the
binding for Fortran 95.
* debian/rules:
+ Enabled compilation of Fortran 95 binding. Due to some strange
libtool problem, "FC=gfortran and F77=gfortran" must be given to
configure.
+ Run "make check" after "make" in target build-stamp
* debian/control: Created the new package libplplot-fortran9 containing
the F77 and F95 bindings.
* debian/plplot-doc.doc-base: Fixed path for Files and Index.
* New upstream release:
- New language binding for Java (package libplplot9-java, which was
already in version 5.5.3-1, uploaded to experimental)
- New drivers:
+ Gnome Canvas Widget (packages python-plplot-gnome2 and
python-plplot-gnome2 (which were already in version 5.5.3-1,
uploaded to experimental)
+ wxWidgets tool kit (package plplot9-driver-wxwidgets)
+ PostScript with Unicode support (package plplot9-driver-psttf)
* debian/control:
- Bumped Standards-Version to 3.7.2 (no changes needed)
- Build-Depends on liblasi-dev (>= 1.0.5-2) and libwxgtk2.6-dev
- Updated build dependency on libgcj4-dev to libgcj6-dev
(closes: #333785)
- octave-plplot suggests the xwin driver package (closes: #358323)
* debian/patches/50_simplelist-in-man-page: Removed patch (applied
upstream)
* debian/rules: the plplot-doc package has now its own /usr/share/doc
directory (really closes: #361781)
* debian/control: Removed dependency of plplot-doc on libplplot9
* debian/control: Made the dependency of plplot-doc on libplplot9
unversioned (closes: #361781)
* Binary-only non-maintainer upload for i386; no source changes.
* Rebuild against libhdf5-1.6.5
* Recompiled against latest version of libc6. PLplot does not cause
Octave to crash anymore (closes: #351734).
* Due to the gnome1 -> gnome2 transition in sid, the plplot9-driver-gnome
package is removed. The experimental release of plplot (5.5.3)
already contains the gcw driver, which replaces the gnome driver.
* Build-depends on gfortran instead of g77. This should get around a
build failure on the ia64 architecture.
* This version will *_really_* complete the C++ ABI transition. I forgot
to do it for the libplplot-c++9 package, which is now called
libplplot-c++9c2. Most of the changes come from the Ubuntu patch
(thanks to Stephan Hermann <sh@sourcecode.de>):
+ debian/control: adjusted packagename, conflicts/replaces, dependencies
+ debian/rules: adjusted packagename
+ debian/libplplot-c++9c2.files: renamed and edited to new packagename
* First build with gcc/g++ 4.0. This should complete the C++ ABI
transition for the octave-plplot package (closes: #328198).
* debian/rules: Avoid compilation problem of unrecognized type
'__builtin_va_list' when building the Octave binding
(closes: #274359). I am fixing this bug using the hack of setting the
CC variable of the Makefile, instead applying the patch suggested by
Kaare Hviid <ukh_at_id.cbs.dk>, because otherwise I would have to run
automake/libtool/autoconf to build the package. Lame, But It Works (TM).
* debian/control: Upgraded Standards-Version to 3.6.2 (no changes needed).
* debian/copyright: New FSF address.
* debian/patches/50_simplelist-in-man-page.dpatch: Added patch to fix
processing of plcol0.3plplot man page.
* New uspstream release (development branch, hence the upload to
experimental).
* The plplot9-driver-gnome package is replaced by plplot9-driver-gnome2,
which contain the new gcw driver and the liplplpotgnome2 libary.
* The new package python-plplot-gnome2 contains the glue code for using
libplplotgnome2 with Python.
* debian/rules: Added --with-freefont option to configure
* debian/control:
- plplot9-driver-gd recommends now the ttf-freefont package
- libplplot-dev depends on libplplot-c++9, avoiding broken link
/usr/lib/libplplotcxxd.so (closes: #303830)
* Rebuild against Octave 2.1.66
* debian/control:
- Build-depends on octave2.1-headers (>= 2.1.65)
- Fixed typo in description of libcsiro0 package (closes: #284381)
- Made the libplplot9 package suggest all the driver packages,
including plplot-tcl, which contains the Tk driver (closes: #285193)
- Droped several dependencies on libplplot9 (= ${Source-Version}),
which were causing lintian to complain
* debian-rules:
- Include defs.make and use octave-depends command
- Droped manual setting of octave-plplot.substvars
- Use OCTDIR to install plplot_octave.oct
* Rebuilt against Octave 2.1.64.
* New upstream release.
* New upstream release.
* debian/rules: Removed old code for architecture-specific exclusion of
the octave-plplot package.
* debian/struct_contain.m: Removed this file, since it has been
included upstream.
* debian/control: Make the build-dependencies on atlas/lapack specific
to the arm and m68k architectures.
* debian/control: Refine the build-dependencies on atlas/lapack to make
the package build from source on m68k and arm.
* debian/control: Added build-dependency on atlas3-base-dev. For some
obscure reason, plplot is FTBFS on the architectures ia64, s390,
sparc, powerpc, hppa, and mipsel, because neither atlas3-base-dev nor
lapack3-dev are automatically installed. This should be the case, due
to the build-dependency on octave2.1.-headers. I will keep
atlas3-base-dev in Build-Depends until the problem is fixed.
* debian/control: Added dependency on libplplot3-dev to libplplot-dev.
* New upstream release.
* debian/patches: Removed all Octave patches, since they have been
applied upstream.
* debian/control: Add dpendencies to libplplot9 (= ${Source-Version}),
to all packages besides libplplot9 itself. The package is now Lintian
clean.
* Built for Debian testing (a.k.a. sarge).
* New CVS tarball upstream release
* Built for Debian testing (a.k.a. sarge).
* New CVS tarball upstream release.
* debian/patches/octave-2.1.53-demos.dpatch: Added patches for Octave
demos x13c.m, x14c.m, and x17c.m. The whole set of examples for
the Octave bindings work now with Octave version 2.1.57.
* debian/patches/warn-empty-list-elements.dpatch: Added patches for
shade.m and __pl_contour.m. The demos p*.m work now with Octave
version 2.1.57 (except demos p6.m, p17.m, and p20.m).
* debian/rules (install-stamp): Install the file
debian/struct_contains.m before the calls to dh_movefiles, such that
struct_contains.m really goes into the octave-plplot package.
* debian/patches/warn-empty-list-elements.dpatch,
debian/patches/warn-fortran-indexing.dpatch: Added patches for making
the Octave binding working with Octave 2.1.57.
* debian/struct_contains.m: New file which override Octave's one when
toggle_plplot_use is issued.
* debian/rules: Install debian/struct_contains.m in
/usr/share/plplot_octave.
* debian/control:
- Removed build-dependency on g++-3.3 | g++-3.2, since g++ is a
build-essential package (closes: #244007).
- Use build-dependencies on libx11-dev, libxext-dev, and libxi-dev
instead of on xlibs-dev, since this later is now a transition
package (after the XFree86 4.3.0 package reorganization in Debian).
* Build in unstable, so that the octave-plplot package gets
the right dependency on libhdf5 (closes: #246297).
* Patched the configure script to avoid stderr messages to interfere with
the Octave configuration. This may fix the recurrent buildd failures
on the m68k architecture.
* New cvs snapshot upstream release.
* debian/control: Removed build-conflict on f2c and fort77. Added
fort77 build-dependency for the m68k architecture. This should fix
the problem of building from source for m68k, since mkoctfile
apparently needs the f2c library for linking *.oct files on that
architecture.
* New cvs snapshot upstream release.
* Reorganization of the packages to avoid potential problems with future
upgradings of the PLplot libary soversion. Since libplplotcxxd,
libcsirocsa, and libcsironn have different soversion numbers
upstream, they are separated from the main libplplot9.
* debian/control:
- In the description of libplplot9, updated contents of package.
- libplplot-c++9: New package.
- libcsiro0: New package.
* debian/libplplot-c++9.files: New file.
* debian/libcsiro.files: New file.
* debian/rules: create symlinks for /usr/share/doc/lib{plplot-c++9,csiro}
to /usr/share/doc/libplplot9.
* Remove the programs in /usr/bin from the libplplot9 package and put
them into the new package plplot-bin. This will avoid future
conflicts when the soversion of the library will be incremented.
* debian/control: Made libplplot9 conflict with the old plplot package
(<< 5). This allows a smooth upgrade from stable to testing/unstable
by avoiding the overwriting of the file /usr/bin/pltek
(closes: #235252).
* Get Octave bindings to work with octave2.1-2.1.53, the version
available in unstable. Using dpatch for that.
* debian/rules:
- Include dpatch.make.
- Targets build and clean depend on patch and unpatch, respectively.
* debian/control:
- Build-Depends on dpatch.
- Drop alternative build-dependency to octave2.0-headers and force
versioned dependency on octave2.1-headers (>= 2.1.54-2)
* debian/control: Removed build-dependency on libhdf5-serial-dev, since
it will be included in the build-dependencies of octave2.1-headers
(version 2.1.53-3).
* New upstream release.
* Second release candiate tarball for version 5.3.0.
* debian/control: Removed most of the Conflicts/Replaces/Provides
fields, since they where legacies from the libplplot5 packages. The
libplplot9 and libplplot5 still cannot co-exist (although this is
only of theoretical interest, since there are no other packages in
Debian that depend on libplplot5).
* New cvs snapshot upstream release (first release candidate for 5.3.0
release)
* scripts/get-dependency-libs.sh: Applied upstream CVS patch for finding
library files in .libs directories in the build tree.
* bindings/octave/PLplot/toggle_plplot_use.m,
bindings/octave/PLplot/plplot_octave_path.m.in:
Applied patch from upstream CVS to fix problems related to Octave
2.1.52.
* debian/control:
- Made Build-Conflicts on libplplot5 unversioned.
- Removed from Build-Depends and Build-Conflicts the m68k specificities
related to g77, fort77, and f2c. This is a try to get around a
FTBFS on the m68k architecture. Also, requires g++-3.3 | g++-3.2
instead of only g++-3.2.
* debian/control: Added pkg-config to build-dependencies and to
libplplot-dev Recommends:.
* debian/rules:
- Added option --with-pkg-config to configure command.
- Set environment variable PKG_CONFIG_ENV to " " when calling
condfigure. This allows a cleaner line when launching make fro
the installed examples/* directories, since setting PKG_CONFIG_PATH is
not necessary in Debian.
* New cvs snapshot upstream release
* debian/control: Changed section of packages libplplot9,
plplot9-driver-gd, plplot9-driver-gnome, and plplot9-driver-xwin to
libs (was math before) in order to comply with overrides of
debian-installer.
* debian/plplot-tcl.files: Include directories and files
usr/share/plplot*/*tcl
* New cvs snapshot upstream release
* New cvs snapshot upstream release.
* New cvs snapshot upstream release.
* debian/rules: Call configure with --enable-static, such that the
lib*.a files will be present in the *-dev packages (closes: #224550).
* debian/control: Changed architecture of packages libplplot-dev and
plplot-tcl-dev from "all" to "any", because of the *.a files included.
* Preparation for the next upstream version, which changed the soversion
of the PLplot library. Changed all the references to libplplot5 to
libplplot9. Affected files:
- debian/control
- debian/libplplot-dev.files
- debian/octave-plplot.files
- debian/plplot-doc.doc-base
- debian/plplot-doc.files
- debian/plplot-tcl-dev.files
- debian/python-plplot.files
- debian/rules
- debian/libplplot9.README.Debian (new)
- debian/libplplot9.files (new)
* In order to avoid backward incompatibilities with the release of
libplplot9, the driver module packages have now versioned names:
- plplot9-driver-gd
- plplot9-driver-xwin
- plplot9-driver-gnome
* debian/rules:
- Added symlinks /usr/lib/lib{nn,csa}.so.0, such that this release of
the libplplot5 package does not break binary compatiblity with previous
released versions of PLplot (closes: #217895). This is an interim
solution. Probably, the upstream authors will have to change the
soversion or revert the changing of names of the libscsiro{nn,csa}
libraries in order to get the problem cleanly fixed.
- Call configure with --disable-java, since enable_java has been made
the default in the upstream configure.ac.
* debian/libplplot-dev.files: Added README.pkg-config file.
* debian/libplplot5.README.Debian: Fixed typos.
* New CVS snapshot upstream release. This release is actually quite
close to the latest Debian 5.2.1-21, since I have been tracking CVS
developments since the upstream release 5.2.1. One of biggest
advantages of this move is the enourmous reduction in the size of the
diff.gz file:
du -b plplot*diff*
2686036 ../plplot_5.2.1-21.diff.gz
10198 ../plplot_5.2.1.cvs.20031027-1.diff.gz
This huge difference is due to the patched documentation file and the
necessity of an uuencoded file for the Debian packages.
* debian/rules: Removed all manipulations (targets "build" and
"clean") related to the plplot-5.2.1-new-doc.tar.gz.uu file, which is
not included in the source package anymore. Also, added flag -k to
make distclean.
* debian/control: Removed build-dependency on sharutils.
* debian/libplplot5.README.Debian: Added note about pkg-config support.
* sysloc.in: Applied patch from upstream CVS that assigns an unversioned
path to OCTAVE_OCT_DIR.
* debian/rules:
- Loosen the restriction on the Octave version dependency, now that
OCTAVE_OCT_DIR is unversioned.
- Configure with --with-pthreads, such that the xwin driver refreshes
the plot when the window is moved or re-exposed.
* Following a suggestion of Matthias Klose <doko@cs.tu-berlin.de>, the
libltdl library shipped with the upstream sources is not compiled
anymore as a convenience library:
- Patched configure.ac and Makefile.am from upstream CVS. The
configure option --with-ltdlsystem is now implemented, which allows
the use of the installed libltdl library.
- debian/control: Build-depends on libltdl3-dev.
- debian/rules: Call configure with option --with-ltdlsystem.
* debian/control:
- Fixed description of libplplot-dev package.
- Bumped the build-dependency on debhelper to version 4.1.67, since we
are using dh_python (thanks again to Matthias Klose for pointing
this out).
* configure.ac: Added upstream patch from the CVS repository to avoid
problems when using the variable $max_cmd_len in the libtool script.
* debian/rules: Use dh_python to correctly generate python version
dependencies in debian/python-plplot.substvars. This will guarantee
clean upgrades (closes: #207314).
* Regenerated configuration files with latest versions of the autotools in
Debian sid (automake 1.7.7 and libtool 1.5).
* Rebuilt against the new python2.3-dev itcl/itk 3.2 and iwidgets4
packages.
* debian/control:
- Bumped Standards-Version to 3.6.1.
- Bumped build-dependencies to python2.3, itcl3, and itk3.
- plplot-tcl depends now on iwidgets4.
* sysloc.in, configure.ac: Using patched version from CVS upstream with
fixes in the Python configuration and in the list of include
directories to find files itcl.h and itk.h.
* Used new CVS upstream version of the documentation files with
legacy license statement removed. A uuencoded tarball
debian/plplot-5.2.1-new-do.tar.gz.uu is included, which forced the
inclusion of sharutils in Build-Depends. Code have been added to
debian/rules to unpack the new files in this tarball. The plplot-doc
package is now DFSG compliant (closes: #202761).
* utils/plrender.c: Patched from CVS upstream. From the commit log:
Comment out call to plSetInternalOpt which uses the tcl_cmd option
that has been disabled in plargs.c. This fix solves the plrender
memory management problems and the crashes associated with plrender
and device tk.
* Disallow Build-Conflicts on f2c and fort77 for m68k.
* Added build-dependency on fort77 for the m68k to match the
build-dependencies of the octave2.1_2.1.50-2 package.
* Rebuilt with new octave2.1 package (2.1.50-1), such that the
octave-plplot has the correct dependencies in unstable.
* Use new upstream version of sysloc.in, with better
AC_MSG_CHECKING/AC_MSG_RESULT settings for the Octave checks. This
will help in interpreting the buildd logs for some architectures for
which the building is failing.
* debian/control: Added build-dependency on g++-3.2, since its path is
hardcoded in /usr/bin/mkoctfile for some architectures.
* Enable building of octave-plplot for all architectures. The octave2.1
package (version 2.1.49-3*) is working now in all 11 architectures of
Debian sarge. Hopefully, PLplot will now make its way into testing.
* debian/control: Added arm to the list of excluded architectures of
package octave2.*-header in Build-Depends.
* debian/rules: Exclude building of Octave bindings for the arm
architecture.
* (N.B.: I am currently excluding the building of the octave-plplot for
four architectures: hppa, powerpc, m68k, and arm. I will revisit this
decision later when octave2.1 will work again for these
architectures.
* debian/control: Added m68k to the list of excluded architectures of
package octave2.*-header in Build-Depends. Added dependency on
python-numeric to package python-plplot.
* debian/rules: Exclude building of Octave bindings for m68k
architecture.
* debian/control: Restored "Architecture: any" for the octave-plplot
package. Excluded build-dependencies on octave for the hppa and
powerpc architectures.
* Rebuilt using octave 2.1.48.
* debian/rules: Correctly changed some rule dependencies to *-stamp,
since the config target was being unnecessarily executed twice during
the package building.
* debian/rules: Added conditional exclusion of the octave-plplot package
to the dh_gencontrol and dh_builddeb commands.
* debian/rules: Added variable octave_mvf to control exclusion of
package octave-plplot in dh_movefiles command.
* Exclude architectures hppa and powerpc from the building of the
octave-plplot package (in debian/control). There are now variables
octave_cfg and octave_pkg in debian/rules to control this.
* debian/control: Changed description to comply with the Best Packaging
Practices of the Debian Developer's Reference.
* Fixed AC_MSG_CHECKING for the Octave prefix in sysloc.in (upstream
file). Also, added the lacking file doc/docbook/docbook.m4 from
upstream CVS and regenerated configure with autoconf.
* debian/rules: In clean rule, "make distclean" instead of "make clean".
* Copied new top-level Makefile.am and Makefile.in from upstream CVS.
* debian/control: Removed the explicit build-dependencies on libpng-dev,
libjpeg-dev, and libfreetype-dev, since they are declared as
dependencies of libgd2-dev. This is an attempt to fix the libpng
incompatibility between libgd2-dev and libgnome-dev. Also, fixed a typo
in the Build-Conflicts field.
* debian/rules: Remove config.sub and config.guess in clean rule.
* New stable upstream release.
* debian/control: Removed warnings about experimental aspect of the
packages in the Description fields (closes: #189499).
* Built with new CVS sources.
* Built with new CVS sources.
* Built with new CVS sources.
* Added build depends on autotools-dev and let debian/rules update
config.sub and config.guess.
* Built with new CVS sources.
* debian/control: Added build-dependency on matwrap. Changed sections of
libplplot-dev and python-plplot to libdevel and python.
* Built with new CVS sources: The problem with the non-numerical version
number in pkgIndex.tcl has been fixed (closes: #185677).
* Built with new CVS sources: configure has now new options for
controlling configuration and building of the Docbook documentation.
This should generated less warning messages in the autobuilders.
* debian/control: Bumped Standards-Version to 3.5.9. Added
libxml-parser-perl and libxml-dom-perl to Build-Depends, since these
Perl modules are needed for the Octave bindings.
* Built with new CVS sources: Since my last upload, there has been only
improvements in the Octave bindings.
* debian/control: Set Priority: extra for plplot-tcl-dev, such that
debcheck will not complain. Also, changed the order of
octave2.1-headers and octave2.0-headers in Build-Depends. This will
probably make the autobuilders to install the more recent version of
Octave and fix the build problems.
* Built with new CVS sources: fixes in the Octave bindings and in the
Docbook documentation. The configure script does not choke anymore if
the swig program is not available (closes: #184694, closes: #183947).
* Fixed the mess with the Python version. Now, both Python 2.1 and 2.2
are accepted and the dependency field of package python-plplot is
obtained through the substvar ${python:Depends}, which is set in the
rule config of debian/rules.
* PLplot installs now the .oct file in a versioned directory. The
correct dependency of octave-plplot is now obtained through the
substvar ${octave:Depends (closes: #183913).
* debian/control:
- Added dependencies on libqhull-dev and libfreetype6-dev to
libplplot-dev, such that the examples will compile.
- Removed build-dependency to xlib6g-dev.
* debian/rules added --enable-smart-ac-output option to configure, to
avoid needless recompilation of the documentation.
* Moved the plplot_libtool script from libplplot5 into libplplot-dev.
* The ntk driver is now correctly put in the plplot-tcl package, instead
of libplplot5. This was forcing the erroneous dependency of
libplplot5 on Tcl/Tk 8.3. Shame on me!
* debian/control: Added build-dependencies to libpng3-dev and
libjpeg62-dev, such that plplot-gd is built correctly.
* Built with new CVS sources: there are slight improvements in the Octave
bindings, regarding the user function toggle_plplot_use.
* debian/control:
- Changed some Priority and Section headers to match the override
file in the Debian repository, such that the package upload will
be accepted (hopefully).
- Added m4 to Build-Depends.
* Built with new CVS sources:
- The new API plgriddata has been added, as well as the nn and csa
libraries.
- The pkg-config files changed place.
- Xwin driver is now Pthreaded.
- Patch to plsym.c allowing vertical text in the bottom and top axes.
* debian/rules: Removing debian/files for lintian cleanness. After
installation, the dvi form of the documentation is deleted.
* debian/plplot-doc.files: Added the .ps.gz documentation file.
* debian/control: For plplot-doc, added Conlicts: relationship to
libplplot5, since the .ps.gz have been moved. Improved description
for the plplot-doc package.
* Built with new CVS sources. Fixed gnome driver, which was plotting
extraneous text on the canvas. Also, the Octave initalization file is
fixed now, and use_plplot really works.
* debian/libplplot-dev.files: Added /usr/lib/pkgconfig dir.
* debian/control: Removed optional dependencies on octave2.0, since the
octave-plplot package is built for Octave 2.1 and the .oct file will not
work with 2.0.
* This is the first release of this cvs snapshot series to the Debian
unstable repository (closes: #101264).
* A big thanks to David Schleef, who has acted as interim maintainer
(and made a great job) while I have been unavailable.
* Many bugs that have been around for ages are fixed in this
release:
- The plplot-tcl package depends on tcl8.3 and tk8.3 (closes: #117186).
- The octave-plplot package is totally new and has been integrated
into the upstream sources of PLplot (closes: #91308). Octave
bindings are working correctly now (closes: #158446). In
particular, the plplot_octave-demo.m script works fine (closes: #69710).
- use_plplot.m works correctly now (closes: #181875, closes: #74908),
and all the files are found in the LOADPATH of Octave (closes: #179224).
- Python examples should run now, thanks to the new dynamic drivers
scheme (closes: #92150).
- All PLplot manpages have proper whatis entries nows (closes: #100867).
- Dependences on tk8.3-dev have been dropped (closes: #167412).
- Build failure on sparc, due to bad c++ command line options should
be fixed now (it was already in David's NMU, closes: #86880).
- Packages should be fully installable in unstable (closes: #161569).
- "octave2.1-headers | octave2.0-headers" have been added to
Build-Depends, so that octave-plplot can be built from source
(closes: 117708).
- Packages build correctly on m68k (fixed in David's NMU,
closes: #159807).
- A problem in setting up octave2.1 has been fixed in Dirk
Eddelbuettel's NMU (closes: #123700).
- There is no plplot-bin package anymore. Also, there is no
dependency on nonexistent ghostscript package (closes: #136358).
- The build failure due to a wrong Python directory has been fixed
(closes: #159811).
* debian/control: Added warning message telling that the packages are
experimental.
* plplot-doc.prerm: Calling install-info with the correct number of
arguments (closes: #182509).
* Built with new CVS sources. Many DocBook related configuration
problems have been fixed.
* debian/rules: Added config-stamp creation to avoid double run of
configure. Run configure with --enable-docbook now.
* debian/plplot-doc.prerm: Added file.
* Built with new CVS sources. Some rpath problems have been fixed, so
that the package is Lintian clean as regard the rpath.
* Created new package plplot-tcl-dev.
* debian/rules: Give option --without-rpath to configure.
* debian/control: Removed dependencies on packages necessary for
compiling the DocBook documentation, since they will be available in
the upstream distribution tarball.
* Built with new CVS sources. The info files and man pages are now
included in the plplot-doc package. There is also a new PLplot driver
(mem).
* debian/control: Added Build-Dependencies to Perl modules needed to
generate the info form of documentation from the Docbook sources.
Added build-dependency to libfreetype6-dev. Added plplot-xwin
dependency to plplot-tcl.
* debian/plplot-doc.files: Added paths for info and man.
* debian/rules: Give options --infodir and --with-freetype to
configure.
* Built with new CVS sources. The plplot_octave.oct file is installed
in localoctfiledir, instead of octfiledir. This avoids the versioned
installation directory.
* debian/control: octave-plplot does not depend anymore on a specific
version of Octave.
* Something was strangely broken with the inclusion of files in the
plplot-doc package, probably related to an extraneous config.cache
file. Fixed now.
* Built with new CVS sources, with improved installation of Octave files.
* Built with new CVS sources.
* debian/rules:
- Removed hacks for getting the Octave files correctly installed,
since this is fixed in CVS now.
- Added command to remove config.log and config.status files. This
makes lintian happy.
* debian/octave-plplot.files: Included usr/share/doc/libplplot5/*.octave
* New upstream release, built directly from the CVS sources.
* These packages are still experimental and are provided to help the
preparation to the next upstream release (probably 5.2.1).
* There has been a huge reorganization of the packages, thanks to the new
dynamical loading of driver modules. There has been too many changes to
report here.
* Non-Maintainer Upload
* Update for python-2.2 (Closes: #159807, #159811, #161569)
# reenable plplot-python on all architectures
* change Recommends: ghostscript (Closes: #136358)
* Depend on autoconf-2.13, since scripts are broken for 2.50
* Non-Maintainer Upload
* New upstream version (Closes: #101264)
* handle changing of name of libplmatrixd to libtclmatrixd. Since
this library is only used by libplplotd, it is not a ABI change.
libtclmatrixd should probably be in a separate directory or linked
directly with libplplotd -- this needs to be coordinated with
upstream, and may also be moot once this packaged is changed to
use loadable modules for the drivers.
* NMU
* Fix hppa build problems. Closes: #141723
* Remove 'potato' from version number.
* Non-Maintainer Upload
* debian/control, debian/rules: plplot indirectly Build-Depends
on lapack to build python-plplot. Since lapack is only available
on a few architectures, this causes problems building the other
packages on all architectures. Fixed to Build-Depend and build
python-plplot only on working architectures.
* Non-Maintainer Upload
* Fix build dependencies (Closes: #92344, #98119, #102014)
* cf/syslog.in: backport configure rules for tcl/itcl and python2.1
(fixes new build problems)
* debian/control: add dependencies to plplot-dev (Closes: #101392)
* remove use of {} globbing in debian/rules (Closes: #101259)
* debian/changelog: removed emacs settings
* debian/control: change the tk/tcl build dependencies to 8.3
* debian/*: update for python2.1
* debian/control: fix python dependencies to coorespond to policy
* debian/control: remove dependency on itk3.1, since it's added by
${shlibs:Depends}
* debian/*.shlibs: Added shlibs files
Note: the libplmatrix entry in plplot-tcl.shlibs specifies
plplot-xwin, but plplot-xwin doesn't actually have the
library. This is ok, since it should only be used by
libplplotd.so.
* Fixed packages interdependencies and added ${shlibs:Depends}
where appropriate
* Fixed postinst, prerm scripts to use debhelper
* debian/control: Made plplot-common conflict and replace plplot <<
5.0.2, because plplot-common took over plplot's FAQ file. Thanks to
Jim LewisMoss <dres@mindspring.com> (closes: #90846).
* Removed some useless debian/*.dirs files, particularly
plplot-tcl.dirs, which was creating a wrong directory
/usr/lib/plplot5.0.1 (!).
* Added more build dependencies, based on the buildd report on Sparc.
Also, patched cf/sysloc.in to have configure finding the file tcl.h.
Thanks to Ben Collins <bcollins@debian.org> (closes: #91228).
* Removed a extraneous file in the upstream directory.
* New upstream release.
* Backported patch from CVS for using fseek/ftell everywhere to
eliminate non-portable behavior (closes: #86512).
* Changes in the upstream configuration file for making the installation
relocatable. This will be hopefully integrated upstream in the next
release of PLplot, and the Debian diff file will be reduced to files
in the debian/ directory.
* debian/plplot-doc.doc-base, debian/plplot-doc.files: Added files.
* debian/plplot-doc.postinst: Added file for installing info files.
* Added html, pdf, ps, and info forms of the PLplot manual to the
plplot-doc package.
* debian/plplot-dev.files: Added man pages generated from the DocBook
API documentation.
* debian/rules: Added commands for installing files into the plplot-doc
and plplot-dev packages.
* debian/control: Make plplot-doc conflict with plplot << 5. This is
because of the info files.
* debian/plplot-*.README.Debian: Updated.
* debian/control: Changed section of plplot-dev to devel (to avoid mail
notification sent by dinstall, that overrides my choice). Made
plplot-tcl depend on iwidgets3.1 (which is needed to run example
tk02).
* debian/rules: Excluding examples/ dir from list of compressible files
by dh_compress.
Make x16.py non-executable, since it is lacking the initial #! line.
Give explicit -l options for dh_shlibdeps for packages plplot-tcl and
plplot-xwin. This will avoid the wrong dependencies that were being
generated.
* debian/control: Build-depends on iTcl. This will make the plplot-tcl
package [incr Tcl]-able. This is needed to run the tk/tk01 and
tk/tk04 examples (thanks to Alan Irwin <irwin@beluga.phys.uvic.ca> for
pointing this out). Also, made plplot-tcl depend on itk3.1.
* examples/c/plcdemos.h: Removed #definition of PL_DOUBLE, as it is
already done by plConfig.h.
* cf/sysloc.in: Added /usr/include/itcl3.1/generic to incdirs_default.
* debian/control: Make plplot-common conflict with older version of
plplot. This makes a smooth upgrade.
* debian/control: Better descriptions for plplot-c++ and plplot-common
(thanks to Alan Irwin <irwin@beluga.phys.uvic.ca>). Added "Replaces:"
fields to plplot-xwin and plplot-tcl. The dependencies now are
simplified thanks to the use of a virtual package plplot-lib.
* debian/plplot-doc.files: Removed file.
* debian/plplot-dev.files: Addded usr/include. This will put the header
files into plplot-dev (thanks again to Alan).
* Created new package plplot-bin with pltek, plpr and plm2gif, which
were before in plplot-common. This was causing circular dependency
problems.
* debian/plplot-common.files: Get some files that were wrongly going
into the "empty" package plplot.
* New upstream release. Starting with version 5.0.0, PLplot entered a
new development phase. The project is now hosted at SourceForge
(http://plplot.sourceforge.net) and the current Debian maintainer is
also involved with upstream development.
* This release works with potato (hence the release number).
* There has been an overall reorganisation of the packages. There is
now a package called plplot-common, containing the data files.
plplot-xwin and plplot-tcl are both exclusive and contain the shared
libs. plplot-c++ has the C++ bindings shared lib. python-plplot is
working with Python 1.5 and has been reintroduced. plplot-doc is for
now just a boilerplate package, waiting for the DocBook docs to be
introduced in PLplot 5.0.2.
* Prompt flush for pltcl is working now (closes: #58273).
* debian/control:
- Upgraded Standards-Version to 3.1.0.
- Added Build-Depends.
- Forced conflict between plplot and plplot-tcl packages.
- New descriptions for packages plplot-dev and plplot-doc to reflect
the fact that examples go into plplot-dev and plplot-doc is just a
placeholder for future inclusion of the documentation in DocBook
format.
- Updated URL location of the PLplpot website.
- Reintroduced entry for python-plplot. Updated its dependency on
plplot-tcl.
* debian/postinst: Place "exit 0" at the right place, allowing debhelper
added code to be executed (closes: #77997). Also, removed code for
installing info manual. In the future, this will go in pakcage
plplot-doc.
* debian/rules: Major rewrite to reflect the new features of upstream
build and install. The main novelty here is the capability of
doing make install with another $prefix than that used for building.
* debian/*.{docs,files}: Heavily modified to reflect the new upstream
version.
* debian/control-python, debian/fix-tk-path.pl, debian/postrm,
debian/python-exec-header, debian/python-plplot.postinst.debhelper,
debian/python-plplot.prerm.debhelper: Removed files.
* debian/plplot-980407-plplot-980407-new.patch: Removed this obsolete
file.
* Added --disable-linuxvga to configure options fixing an important bug
report (closes: #65216).
* The lib*tk files are moved to the right package now (plplot-tcl).
This fixes the unnecessary dependency of the bare library package
(plplot) on the TCl/Tk libraries.
* debian/rules:
- Using option --without-f2c with ./configure. This should avoid the
build problems when the package f2c (which provides /usr/bin/fc) is
installed (closes: #30944).
- Erase empty dir usr/share/doc/examples after dh_movefiles. This
prevents the plplot from having junk in it.
* debian/control: Excluded problematic package python-plplot. Created
file debian/control-pyhton for easy reversal in the future (closes:
#33150).
* Added "#define PLPLOT_DOUBLE" to plcdemos.h. This will allow
compilation of the examples, due to the lacking of `PLPLOT_DOUBLE'
definition (Closes: #49120, #36993). Also added a note in
plplot-dev.README.Debian indicating how to compile correctly.
* FHS compliant.
* Upgraded to Standards-Version 3.0.1 (requires debhelper >= 2.0.68).
* debian/copyright: Right location for the LGPL.
* cf/sysconf.in: Added `SHLIB_F77FLAGS="-fpic -fPIC"'.
* Recompiled with new release of libc6 (cf discussion in debian-devel
starting at
http://www.debian.org/Lists-Archives/debian-devel-9812/msg00998.html).
* Changed LDC in cf/sysconf.in to F77 (link with gcc complains because
it is lacking symbols from g77).
* Set Conflicts relationship because files were moved around in the
latest release (Fixes Bug#29694, reported by Francesco Potorti`
<F.Potorti@cnuce.cnr.it>).
* Rebuilt to fix bogus dependency on tkstep8.0 (closes Bug#29704
reported by Matthias Klose <doko@cs.tu-berlin.de>)
* Uploading to frozen and unstable. (The previous release, 4.99j-5, was
rejected and I never reuploaded it.)
* Revamped debian/rules with use of variables for the debian dirs.
* Corrected typo in plplot-dev.README (closes Bug#28534).
* No compression of executable exemples in package plplot-doc.
* Fixed paths only for tk* scripts under /usr/doc/plplot/examples/tk.
* Fixed permission for plcolor.tcl and tkdemos.tcl.
* Fixed path for script x16.py (in plplot-doc).
* Moved library files libMatrix and libplplotdtk from plplot-tcl to
plplot.
* Moved info file from the plplot-doc package to the base package
plplot: this is the only documentation availalbe for the PLplot API.
* Fixed typo ("\*") in debhelper compress files.
* Fixed the problem related to the naming of shared libraries.
* Improved "Description:" fields in debian/control:
- Added "a scientific library" to first line (as suggested by
Christopher J. Fearnley <cjf@I21.com>).
- Included URL of PLplot homepage for each package.
* dh_shlibdeps does not act on package python-plplot.
* postinst and postrm test now for its argument.
* Rewrote README.Debian files.
* Build with patch from Joao Cardoso <jcardoso@inescn.pt> for Octave
interface. The patch file is included in the debian/ directory.
* The orig.tar.gz and the diff.gz files were absent from 4.99j-4
upload. This is corrected now (bug reported by Paul Slootman
<paul@wau.mis.ah.nl>).
* Corrected sed expression for fixing the #! path in Python scripts
* Corrected bug in debian/compress file which was causing compression of
executable scripts under usr/doc/plplot/examples.
* Created plplot-tcl.postinst with a call to ldconfig, as plplot-tcl
includes shared libraries.
* Links to the shared library are now Policy compliant, i.e. their names
have only one number after .so.
* debian/shlibs.local is renamed to debian/shlibs, and
debian/plplot-tcl.shlibs is created.
* The scripts installed under usr/lib/tcl8.0/plplot/ should not be
executable.
* debian/fix-tk-path.pl script is chmod'd in debian/rules files: now
fixes really first part of Bug#26935. Fix suggested by Paul Slootman
<paul@wau.mis.ah.nl>.
* debian/control: plplot-doc architecture is now "all" and is compiled
in the binary-indep section of debian/rules (suggested by
Paul Slootman <paul@wau.mis.ah.nl>). In order to do that, big changes
in debian/rules were done. Hope I did not screw things up.
* debian/rules: Corrected hideous bug in chmod mode switches: "chmod -x"
should be "chmod +x".
* Corrected some typos in debian/control, debian/copyright.
* cf/pkg_tcl.in: put number version in libMatrix.so (changed
README.Debian to document the fix).
* Moved libMatrix.so and libMatrix.a to plplot-dev package.
* Moved libMatrix.so.* and libplplotdtk.so.* to plplot-tcl package, and
made plplot-dev depend on plplot-tcl (changed debian/control file to
reflect the changes).
* I just realized that the upstream Python support works only with
python-1.4. I will fix this in the next release.
* debian/rules: fixing Python path for python scripts is done now with a
sed command (get rid of debian/fix-python-path.pl). Suggested by
Matthias Klose <doko@cs.tu-berlin.de>.
* Change in upstream file utils/pltek.c: gcc 2.7.2.3 deprecates the use
of gets
* Corrected file debian/plplot-dev.files, in order to have the files
libMatrix.* included in the right package (plplot).
* Make plplot conflict with plplot-dev for versions previous to this
one, because of the move of libMatrix.*.
* Changed mode of debian/fix-tk-path.pl script to executable (fixes
first part of Bug#26935).
* Building is now done entirely under debian/tmp (fixes second part of
Bug#26935).
* Buildning now `with double' instead of `with float', as required for
the PLplot Octave interface. Also, all instances of `libplotf*' were
changed to `libplotd*' (in debian/rules and in debian/*.files).
* /usr/lib/libplplotdtk.so.* files moved to the plplot package (they were
in plplot-tcl): this fixes the problem of installing the plplot-dev
package with a dangling symlink.
* Removed file debian/dirs, which had no function at all.
* Tcl/Tk and Python scripts under /usr/doc/plplot/examples are now
executable.
* fix-tk-path.pl: corrected "/example/" -> "/examples/"
* Using debhelper 0.93 : README.Debian files are installed automatically
by dh_installdocs
* Fixed some problems found by Matthias Klose <doko@cs.tu-berlin.de>.
Danke Matthias!
* Corrected typo in fix-pytho-path.pl, that made all python examples
have size equal to zero.
* examples/Makefile has now correct references to /usr directories
* Scripts under /usr/doc/plplot/examples are no more compressed
* Tk scripts under /usr/doc/examples/tk have now the right path after
`#!'
* Added dependency python-tk to python-plplot
* Initial Release.