* Drop change which is no more needed, thereby fixes systemd integration
and the availability of /lib/systemd/system-shutdown/nutshutdown
(LP: #1603609)
- Disable systemd unit; it does not check nut.conf whether nut is
configured, and thus fails to start (and the package install). The
init.d script works well enough for the time being.
* Merge with Debian unstable. Remaining changes:
- remove Build-Depends on libpowerman0-dev
- remove nut-powerman-pdu
+ debian/nut-powerman-pdu.{install,manpages}: dropped for now
- debian/nut-{cgi,server}.postinst: fix 'adduser' logic to be
unconditional, since adduser is guaranteed to be idempotent.
- debian/source_nut.py, debian/{nut,nut-server,nut-client}.install,
debian/rules: Install apport hooks for all top-level nut packages.
- Disable systemd unit; it does not check nut.conf whether nut is
configured, and thus fails to start (and the package install). The
init.d script works well enough for the time being.
- debian/tests/test-nut.py: in the CVE_2012_2944 test, give nut at most
+ 5 seconds to shut down, instead of expecting it to be shut down
immediately after sending the killall.
+ Additional indication on how to run tests for xenial+
- debian/tests/control : Fix dep8 test failures:
+ Drop python-unit from dep8 dependencies since the python-test
package has now been removed. The unittest module has shipped with
Python since 2.1.
+ Add dep8 test dependency on python, since Python 2 is required and
is not necessarily installed by default any more.
- debian/libnutclient0.symbols: Correct symbols file for ppc64el.
- fix cflags/ldflags mismatch (LP #1711092)
* Drop:
- udevd is called systemd-udevd (LP #1540008)
[ Fixed in Debian 2.7.4-5.1 ]
- d/libnutclient0.symbols: fix symbols in regard to gcc-7
(LP #1711091)
[ Fixed in Debian 2.7.4-5.1 ]
* Non-maintainer upload.
[ Laurent Bigonville ]
* debian/nut-server.postinst: The udevd process is called systemd-udevd for
quite sometimes already, properly detect whether it's running or not, this
should fix the devices permissions for USB UPS's (LP: #1540008)
* debian/rules: Mask ups-monitor, this is not a real LSB initscript but it's
a symlink to the nut-client one. The purpose of this was to offer a common
interface to shutdown the UPS in case of power loss, this is not necessary
with systemd as this functionality is handeled by the
/lib/systemd/system-shutdown/nutshutdown script now.
[ Michael Stapelberg ]
* Update symbols file for gcc-7 (Closes: #853579)
* d/p/fix-snmp-driver-compile-options.patch: fix cflags/ldflags
mismatch (LP: #1711092).
* d/libnutclient0.symbols: fix symbols in regard to gcc-7 (LP: #1711091).
* debian/nut-server.postinst: The udevd process is called systemd-udevd
for quite sometimes already, properly detect whether it's running or not,
this should fix the devices permissions for USB UPS's (LP: #1540008).
* debian/libnutclient0.symbols: Correct symbols file for ppc64el.
* Merge with Debian; remaining changes (LP: #1643618)
- debian/control:
+ remove Build-Depends on libpowerman0-dev
+ remove nut-powerman-pdu
- debian/nut-powerman-pdu.{install,manpages}: dropped for now
- debian/nut-{cgi,server}.postinst: fix 'adduser' logic to be
unconditional, since adduser is guaranteed to be idempotent.
- debian/source_nut.py, debian/{nut,nut-server,nut-client}.install,
debian/rules: Install apport hooks for all top-level nut packages.
- Disable systemd unit; it does not check nut.conf whether nut is
configured, and thus fails to start (and the package install). The
init.d script works well enough for the time being.
- debian/tests/test-nut.py:
+ In the CVE_2012_2944 test, give nut at most 5 seconds to shut down,
instead of expecting it to be shut down immediately after sending the
killall.
+ Additional indication on how to run tests for oneiric, precise to
vivid and wily+
- debian/tests/control : Fix dep8 test failures:
+ Drop python-unit from dep8 dependencies since the python-test
package has now been removed. The unittest module has shipped with
Python since 2.1.
+ Add dep8 test dependency on python, since Python 2 is required and
is not necessarily installed by default any more.
* Dropped changes:
- Patch libtool.m4 and configure to support ppc64le. (Fixed upstream)
- Remove unnecessary chmod 755 on files introduced by previous merge,
assumed to be an error
- debian/patches/0006-ups-conf-maxretry.patch: documentation tweaks
(unnecessary Ubuntu delta). This was formerly listed as "Move maxretry
setting above Examples section" but no longer did this at all.
* Replace outdated indictions on how to run tests (Oneric, Precise, Vivid,
Wily+) with proper indications for current version (Xenial+)
* debian/control: Build-depends against asciidoc-dblatex, Recommends are not
pulled automatically by the buildd (Closes: #851015)
* debian/libnutclient0.symbols: Update the .symbols file, this should fix
the FTBFS (Closes: #835703)
* debian/nut-monitor.install: Install appdata file
* debian/libnutclient0.symbols: Really add all the needed symbols (Closes:
#831725)
* debian/libnutclient0.symbols: Adjust .symbols file for arch specific C++
symbols (Thanks to pkgkde tools)
* Run wrap-and-sort
* debian/control: Add systemd to the build-dependencies, we need the
systemd.pc file to be installed during the build
[ Arnaud Quette ]
* New upstream release (Closes: #806255)
* debian/patches/series: remove 0007-killpower-path.patch
* debian/control: add new packages libnutclient0 and libnutclient-dev
* debian/rules: adapted for the new packages
* debian/libnutclient0.install, debian/libnutclient0.symbols,
debian/libnutclient-dev.install, debian/libnutclient-dev.manpages:
created for the new packages
[ Laurent Bigonville ]
* debian/gbp.conf: Switch back the branch to the "debian" one
* Drop d/p/0009-fix-favorites-permissions.patch, merged upstream
* d/p/0002-nut-monitor-paths.patch, d/p/0006-ups-conf-maxretry.patch:
Refreshed
* debian/control: Bump Standards-Version to 3.9.8 (no further changes)
* debian/control: Add dh-python to the build-dependencies
* Bump debhelper compatibility to 9
* d/p/0009-fix-nutshutdown-install.patch: Install the nutshutdown script in
the correct path
* debian/nut-server.install: 52-nut-usbups.rules file has been renamed to
62-nut-usbups.rules
* debian/libnutclient0.symbols, debian/libupsclient4.symbols: Adjust the
.symbols files
* debian/control: Use https:// URL's in Vcs-* fields
* debian/nut-cgi.README.Debian: Fix typo
* debian/control: Fix the grammar in nut-ipmi long description
* Drop debian/nut-monitor.menu and debian/nut-monitor.xpm, not needed
anymore per tech-ctte decision #741573
* debian/rules: Enable hardening=+all
* Merge with Debian; remaining changes (LP: #1522346) :
- debian/control:
+ remove Build-Depends on libpowerman0-dev
+ remove nut-powerman-pdu
- debian/nut-powerman-pdu.{install,manpages}: dropped for now
- debian/{nut-cgi,nut-server}.postinst: add nut to the group
unconditonally, for compatibility with UPSes connected by serial port.
- debian/source_nut.py, debian/{nut,nut-server,nut-client}.install,
debian/rules: Install apport hooks for all top-level nut packages.
- Patch libtool.m4 and configure to support ppc64le.
- Disable systemd unit; it does not check nut.conf whether nut is
configured, and thus fails to start (and the package install). The
init.d script works well enough for the time being.
- debian/tests/test-nut.py: in the CVE_2012_2944 test, give nut at most
+ 5 seconds to shut down, instead of expecting it to be shut down
immediately after sending the killall.
+ Additional indication on how to run tests for oneiric, precise to
vivid and wily+
- debian/patches/0006-ups-conf-reorder.patch: Move maxretry setting
above Examples section.
- debian/tests/control : Fix dep8 test failures:
+ Drop python-unit from dep8 dependencies since the python-test
package has now been removed. The unittest module has shipped with
Python since 2.1.
+ Add dep8 test dependency on python, since Python 2 is required and
is not necessarily installed by default any more.
* Dropped changes:
- Fix linking libupsclient : Superseded upstream
- debian/patches/backport-fix-lp753661.patch: extraneous end-of-line now
fixed differently upstream.
- debian/rules: Use udev version for Ubuntu; delta no longer needed as
both versions are earlier than the earliest supported udev in Ubuntu.
[ Steve Langasek ]
* debian/nut-{cgi,server}.postinst: fix 'adduser' logic to be
unconditional, since adduser is guaranteed to be idempotent.
* Really fix package initial installation when PID1 is systemd (Closes:
#747863)
* debian/NEWS: Fix NEWS file syntax
[ Laurent Bigonville ]
* debian/gbp.conf: Switch to debian-jessie branch
* debian/rules: Revert the changes made in the previous NMU, I don't think
that dropping the .service file that late in the release cycle is a good
idea and anyway this was causing left-over files on upgrade.
* Add wrappers that check the MODE in /etc/nut/nut.conf to avoid starting
the daemons if nut is not configured (Closes: #747863).
[ Michael Fincham ]
* Add patch that detects and corrects unsafe permissions on ~/.nut-monitor
left over from old installations during NUT-Monitor startup.
(Closes: #777706)
* Non-maintainer upload.
* Port Ubuntu change to drop upstream systemd unit files to allow
sysvinit files for Jessie. (Closes: #747863)
* New upstream release
- Fix the undefined references (Closes: #731156)
- debian/patches/0004-fix-systemd-service.patch: Refreshed
- Drop d/p/0005-Provide-retry-options-for-upsdrvctl-and-drivers.patch:
Merged upstream
- debian/nut-server.install: Upstream is now installing upsdrvctl /sbin
- Rename package libupsclient3 to libupsclient4, soname got bumped again
* debian/rules, debian/control, d/p/0004-fix-systemd-service.patch: Use a
symlink instead of an Alias= to mask the SysV initscript
* debian/control: Bump Standards-Version to 3.9.5 (no further changes)
* debian/tests/control: Add lsb-release and netcat to the dependencies
(Closes: #733189)
* debian/control, debian/rules: Call dh-autoreconf and pass LDFLAGS to
minimize runtime dependencies
* debian/patches/0008-drop-w3c-icons.patch: Remove the link to external W3C
icons to prevent privacy breach (privacy-breach-w3c-valid-html)
* debian/nut-server.install, debian/nut-server.manpages: Install new
nutdrv_atcl_usb driver
* Fix dep8 test failures:
- Drop python-unit from dep8 dependencies since the python-test
package has now been removed. The unittest module has shipped with
Python since 2.1.
- Add dep8 test dependency on python, since Python 2 is required and
is not necessarily installed by default any more.
* debian/patches/0006-ups-conf-reorder.patch: Move maxretry setting
above Examples section, closer to the "outside of a driver definition"
comment. (LP: #1405822)
* debian/tests/test-nut.py: in the CVE_2012_2944 test, give nut at most 5
seconds to shut down, instead of expecting it to be shut down immediately
after sending the killall. (LP: #1291378)
* Disable systemd unit; it does not check nut.conf whether nut is
configured, and thus fails to start (and the package install). The init.d
script works well enough for the time being. (LP: #1313231)
* Merge with Debian; remaining changes:
- debian/control:
+ remove Build-Depends on libpowerman0-dev
+ remove nut-powerman-pdu
- debian/nut-powerman-pdu.{install,manpages}: dropped for now
- debian/{nut-cgi,nut-server}.postinst: add nut to the dialout and nut
groups unconditonally to handle the upgrade from hardy release.
- debian/source_nut.py, debian/{nut,nut-server,nut-client}.install,
debian/rules: Install apport hooks for all top-level nut packages.
- debian/rules: Use udev version for Ubuntu
- debian/series, debian/patches/backport-fix-lp753661.patch: re-enabled
* Fix linking libupsclient.
* Patch libtool.m4 and configure to support ppc64le.
* New upstream release (Closes: #730183)
- Refresh debian/patches/0004-fix-systemd-service.patch
- Rename libupsclient1 to libupsclient3 following the soname bump, rename
libupsclient1-dev to libupsclient-dev, the package is not co-installable
anyway
* debian/rules, debian/control: Enable SSL support using libnss3
* d/p/0005-Provide-retry-options-for-upsdrvctl-and-drivers.patch,
d/p/0006-ups-conf-maxretry.patch: By default, retry to start the drivers
up-to three times, this should mitigate races with slow devices
(Closes: #694717)
* debian/nut-server.install, debian/nut-server.manpages: Install new drivers
* Move bash-completion file to /usr/share/bash-completion/
* debian/patches/0007-killpower-path.patch: Revert POWERDOWNFLAG back to
/etc/killpower
* debian/nut-client.lintian-overrides: Add override for
systemd-no-service-for-init-script ups-monitor
* debian/rules: Drop static ordering for the initscripts and pass
--restart-after-upgrade option to dh_installinit and dh_systemd_start to
minimize the downtime of the daemons
* debian/control: Do not build nut-ipmi on hurd-i386 as freeipmi is not
available on that platform.
[ Laurent Bigonville ]
* debian/control:
- Move libupsclient1 package to libs Section
- Add libgd-dev to the Build-Depends, keep the other alternatives to ease
the backports
- Bump Standards-Version to 3.9.4 (no further changes)
- Add autotools-dev to the build-dependencies so config.{guess,sub} are
getting updated during build
- Use canonical URL for the VCS-* fields
- Add build-dependency against dh-systemd and bump minimal cdbs version so
systemd helpers are called during build.
* Added dep-8-tests to improve QA (from Ubuntu, closes: #708130)
* debian/nut-monitor.menu, nut-monitor.xpm: Add Debian menu entry (Closes:
#708813)
* debian/rules: Drop manual creation of .service files symlink, this should
be handled by dh_systemd now
* debian/patches/0004-fix-systemd-service.patch: Also add Wants/Before for
systemd-udev-settle.service in the nut-driver.service as it got renamed
after udev merge
* debian/patches/0004-fix-systemd-service.patch: Fix path for upsdrvctl in
scripts/systemd/nutshutdown.in
[ Ivo De Decker ]
* debian/nut-client.preinst: also revert /etc/nut/nut.conf mangling done
by postinst during upgrade from lenny to squeeze (Really closes: #677054)
Thanks to Andreas Beckmann for the review.
[ Laurent Bigonville ]
* debian/control: Move the nut-monitor Suggests from nut-server to
nut-client
* Restore proper SELinux context for runtime created /var/run/nut directory
* debian/control: Fix typo in package description
* debian/watch: Update watch file URL (Thanks to Bart Martens)
* debian/rules: Alias systemd nut-monitor service file to nut-client to
prevent it from running twice
* d/p/0004-fix-systemd-service.patch: Fix systemd service file for Debian
* Install tmpfiles conf files to create /run/nut directory during boot
[ Sébastien Villemot ]
* debian/nut-client.preinst: revert /etc/nut/nut.conf mangling done by older
versions of the postinst (Closes: #677054)
[ Ivo De Decker ]
* Only fix permissions of configfiles on first install.
* Only remove /etc/init.d/nut from previous versions of nut in nut-server
postinst if there are no local changes.
* Also remove /etc/init.d/nut in nut-client postinst. Thanks to
Laurent Bigonville for the hint.
[ Arnaud Quette ]
* debian/control, debian/nut-ipmi.{install,manpages}: create IPMI
support package
* debian/nut-server.install: only install USB udev rules
[ Laurent Bigonville ]
* New upstream release
- Drop debian/patches/0001-fix-upsmon-regression.patch, applied upstream
* Follow multi-arch policy
* Install systemd .service files (Closes: #679450)
* debian/nut-server.install: Drop newmge-shut, renamed upstream to mge-shut
and install the old implementation (oldmge-shut) instead
* debian/control: Drop ancient Conflicts/Provides/Replaces
* Install all development files under /usr
* Rebuild for libgd3 and libsnmp30.
* Merge from Debian. Remaining changes:
- debian/control:
+ remove Build-Depends on libpowerman0-dev
+ remove nut-powerman-pdu
- debian/nut-powerman-pdu.{install,manpages}: dropped for now
- debian/{nut-cgi,nut-server}.postinst: add nut to the dialout and nut
groups unconditonally to handle the upgrade from hardy release.
- debian/source_nut.py, debian/{nut,nut-server,nut-client}.install,
debian/rules: Install apport hooks for all top-level nut packages.
- debian/rules: Use udev version for Ubuntu
- debian/series, debian/patches/backport-fix-lp753661.patch: re-enabled
* Merge from Debian. Remaining changes:
- debian/control:
+ remove Build-Depends on libpowerman0-dev
+ remove nut-powerman-pdu
- debian/nut-powerman-pdu.{install,manpages}: dropped for now
- debian/{nut-cgi,nut-server}.postinst: add nut to the dialout and nut
groups unconditonally to handle the upgrade from hardy release.
- debian/source_nut.py, debian/{nut,nut-server,nut-client}.install,
debian/rules: Install apport hooks for all top-level nut packages.
- debian/rules: Use udev version for Ubuntu
- debian/series, debian/patches/backport-fix-lp753661.patch: re-enabled
* Dropped the following patches, no longer required:
- debian/patches/CVE-2012-2944.patch (included upstream)
* debian/rules: Stop the nut-client before nut-server on systems using static
boot ordering (Closes: #679451)
* debian/nut-server.postinst: Remove /etc/init.d/nut on upgrade
(Closes: #677822)
* Rename nut-server.lintian-overrides to nut-client.lintian-overrides and
adjust overrides now that ups-monitor is shipped in nut-client package
(Closes: #677947)
* Add debian/patches/0001-fix-upsmon-regression.patch: Fix upsmon/upssched
regression (Taken from upstream) (Closes: #679513)
* Move nut metapackage to Section: metapackages
* Also create nut user when installing nut-client package and do not delete
it on purge anymore (Closes: #682000)
* Drop /etc/default/nut → /etc/nut/nut.conf migration code, migration
happends before squeeze release and this was against policy to have a
maintainer script modifying a conffile in the first place (Closes: #684392)
* Add dependency against adduser and lsb-base on nut-client package
* Be sure that client is stopped before the server also when using
dependencies based boot
* Fix package descriptions (Closes: #678068)
* Also install /bin/upssched-cmd in nut-client package as this script is
referenced in default upssched.conf config file
* debian/watch: Update watch file
* Be sure that all maintainer scripts are returning 0 at their end
* New upstream release (Closes: #671444)
* acknowledges NMU (Closes: #613643)
* debian/nut-client.init: fix action "start" and use of log_*_*msg
LSB log functions (Closes: #675619)
* debian/nut-server.preinst: remove obsolete file(s) left in
/etc/udev/rules.d and related processing: udev files are now located
in /lib/udev/rules, and there is no reason to modify the dedicated
USB UPS rules (52-nut-usbups.rules) (Closes: #660072)
* debian/nut-server.init: rewrite to match upsd / drivers startup scope
* debian/nut-client.init: created to match upsmon startup scope
(Closes: #634858)
* debian/nut.TODO.Debian, debian/Makefile.am: updated to reflect the above
* debian/rules: install nut-client.init, and update to reflect the above
* debian/control, debian/Makefile.am: updated to reflect the above
* debian/control:
- add Breaks on nut-server (<< 2.6.3-1~)
- bump Standards-Version to 3.9.3
* debian/nut-client.links: renamed from debian/nut-server.links, since
ups-monitor is now provided by nut-client initscript
* debian/nut.README.Debian: renamed from nut-server.README.Debian,
to provide it with both client and server packages
* debian/nut-server.install: add missing drivers (clone-outlet,
liebert-esp2 and microdowell)
* debian/nut-server.manpages: add missing manual pages (apcsmart-old,
ivtscd, liebert-esp2 and microdowell)
* SECURITY UPDATE: remote denial of service
- debian/CVE-2012-2944.patch: limit the set of parsed characters to ' '
through '~'
- CVE-2012-2944
* Merge from Debian testing. Remaining changes:
- debian/control: Drop Build-Depends on libpowerman0-dev (currently in
universe)
- debian/{nut-cgi,nut-server}.postinst: add nut to the dialout and nut
groups unconditonally to handle the upgrade from hardy release.
- debian/nut-powerman-pdu.{install,manpages}: dropped for now.
- debian/source_nut.py, debian/{nut,nut-server,nut-client}.install,
debian/rules: Install apport hooks for all top-level nut packages.
- debian/rules: Use udev version for Ubuntu.
- debian/series, debian/patches/backport-fix-lp753661.patch: re-enabled.
* New upstream release (Closes: #635186, #598741, #633756, #638221)
* debian/nut-server.{install,manpages}: add richcomm_usb
* debian/nut-server.install, debian/rules: install Avahi service file
* debian/rules, nut-client.install: install Augeas lenses
* debian/nut-server.README.Debian: clarify udev explanation (Closes: #529664)
* debian/patches/0001-fix_spelling_and_typo.patch,
debian/patches/0003-libupsclient-version.patch: removed since these are now
fixed upstream
* debian/patches/series: updated
* Merge from debian unstable. Remaining changes:
- debian/control: Drop Build-Depends on libpowerman0-dev (currently in
universe)
- debian/{nut-cgi,nut-server}.postinst: add nut to the dialout and nut
groups unconditonally to handle the upgrade from hardy release.
- debian/nut-powerman-pdu.{install,manpages}: dropped for now.
- debian/source_nut.py, debian/{nut,nut-server,nut-client}.install,
debian/rules: Install apport hooks for all top-level nut packages.
- debian/rules: Use udev version for Ubuntu.
- debian/series, debian/patches/backport-fix-lp753661.patch: re-enabled.
* New upstream release (Closes: #594989)
* debian/control:
- remove legacy Build-Depends for nut-hal-drivers on libdbus and libglib
- Build-Depends-Indep on docbook-xsl for offline document
generation (Closes: #635347)
* debian/nut-server.install: add apcsmart-old
* debian/nut-server.init:
- add udev as Required-Start/Stop (Closes: #642412)
- remove legacy support for /etc/default/nut (Closes: #638021)
* debian/patches/0003-libupsclient-version.patch: added to fix the missing
libupsclient version info bump
* debian/libupsclient1-dev.links: update link name
* debian/libupsclient1.symbols: add with upscli_tryconnect
* debian/nut.TODO.Debian: update and complete the TODO list
* Fix FTBFS for Ubuntu (LP: #815760):
- debian/control: Build-Depends-Indep on docbook-xsl for offline
document generation.
* Merge from Debian unstable (LP: #811976). Remaining changes:
- debian/control: Drop Build-Depends on libpowerman0-dev (currently in
universe)
- debian/{nut-cgi,nut-server}.postinst: add nut to the dialout and nut
groups unconditonally to handle the upgrade from hardy release.
- debian/nut-powerman-pdu.{install,manpages}: dropped for now.
- debian/source_nut.py, debian/{nut,nut-server,nut-client}.install,
debian/rules: Install apport hooks for all top-level nut packages.
- debian/rules: Use udev version for Ubuntu.
- debian/series, debian/patches/backport-fix-lp753661.patch: re-enabled.
* debian/nut.README.Debian: Adjust udev rules naming for permissions override
(Closes: #529664)
* Re-add and refresh debian/patches/0001-fix_spelling_and_typo.patch:
Some typos and spelling errors remain.
* Split nut package into nut-client and nut-server, keep nut package as
metapackage
* Generate PDF and html doc and install it in nut-doc package
* debian/rules:
- List non-installed files
- Includes python-module.mk
- Add flags to build documentation and install it
* debian/control:
- Add python-nut package and add python build-dependency
- Set nut-powerman-pdu priority to extras
- Add nut-monitor package
- Add nut-doc package and add required C/R/P
- Add libups-nut-perl package
* debian/nut-server.prerm: Remove /var/run/nut during removal
* Merge from debian unstable. Remaining changes:
- debian/control:
+ Drop Build-Depends on libpowerman0-dev (currently in universe)
- debian/{nut-cgi,nut}.postinst: add nut to the dialout and nut groups
unconditonally to handle the upgrade from hardy release.
- debian/nut-powerman-pdu.{install,manpages}: dropped for now.
- debian/source_nut.py, debian/nut.install, debian/rules: Install apport hook.
- debian/rules: Use udev version for Ubuntu.
* debian/patches/backport-fix-lp753661.patch: Refreshed.
* Drop changes due to .pc being not clean.
* New upstream release (Closes: #595953, #614842, #595773)
* debian/patches/*.patch: removed since these are now fixed upstream
[Laurent Bigonville]
* Drop HAL package and build-dependencies (Closes: #613197)
* debian/control:
- Bump Standards-Version to 3.9.2 (no further changes)
- Drop autotools build-dependencies (not needed anymore)
- Drop non-existing build-dependencies
* debian/rules:
- Correctly pass flags to configure
* Merge from debian unstable (LP: #789323). Remaining changes:
+ debian/control:
- Update maintainer as per spec.
- Add Breaks on nut-hal-drivers to ensure we have correct udev version.
- Drop libpowerman0-dev from the Build-Depends (currently in universe)
+ debian/{nut-cgi,nut}.postinst: add nut to the dialout and nut groups
unconditonally to handle the upgrade from hardy release.
+ debian/nut-powerman-pdu.install, debian/nut-powerman-pdu.manpages: dropped for now.
+ debian/nul-hal-drivers.{docs,install,postinst,preinst}: Dropped since hal is in universe now
+ debian/nut.links: must create the init script link, used if the upse needs to be powered down
(LP: #357583)
+ debian/source_nut.py, debian/nut.install, debian/rules: Install apport hook.
+ debian/patches/backport-fix-lp753661.patch
+ Dropped:
- debian/patches/fix_pc_file.patch: replaced by debian's 0002-fix_libupsclient_pc.patch
* debian/patches/fix_pc_file.patch: add DEP3 patch header
* debian/patches/debian-changes-2.6.0-1: remove that accidental file
* debian/nut-snmp.docs: Distribute snmp.txt doc file (Closes: #548295)
* d/p/0001-fix_spelling_and_typo.patch: Update and refresh
* debian/nut.lintian-overrides: Fix typo
* debian/patch/0002-fix_libupsclient_pc.patch: Fix libupsclient.pc (Closes:
#624255)
* debian/rules:
- Switch to cdbs
- Remove not existing configure options (Closes: #611813)
- Drop Phony rules (Closes: #613699)
* debian/control:
- Add cdbs build-dependency
* debian/patches/backport-fix-lp753661.patch: Backport fix
to trim extraneous end-of-line, in buggy HID string tables,
which results in upsc breaking the communication pipe.
(LP: #753661)
* fix_pc_file.patch: fix .pc source files by using LIBSSL_LIBS instead of
LIBSSL_LDFLAGS to avoid a FTBFS in packages that uses libupsclient.pc
(LP: #743484)
* Merge from Debian unstable, remaining changes:
+ debian/control:
- Update maintainer as per spec.
- Add Breaks on nut-hal-drivers to ensure we have correct udev version.
- Drop libpowerman0-dev from the Build-Depends (currently in universe)
+ debian/{nut-cgi,nut}.postinst: add nut to the dialout and nut groups
unconditonally to hanle the upgrade from hardy release.
+ debian/nut-powerman-pdu.install, debian/nut-powerman-pdu.manpages: dropped for now.
+ debian/nul-hal-drivers.{docs,install,postinst,preinst}: Dropped since hal is in universe now
+ debian/nut.links: must create the init script link, used if the upse needs to be powered down
(LP: #357583)
+ debian/source_nut.py, debian/nut.install, debian/rules: Install apport hook.
+ Dropped:
- debian/patches/0002-fix_udev_action.patch: Accepted upstream.
- debian/patches/0004-netvision-improvements-lp-600950: no longer needed.
- debian/patches/0005-fix-nut-m4.patch: no longer needed.
- debian/patches/9999-autoconf.patch: no longer needed.
* New upstream release (Closes: #575176, #588648, #609597, #687985)
* debian/patches/*.patch: removed since these are now fixed upstream
* debian/patches/0001-fix_spelling_and_typo.patch,
debian/patches/series: reworked to match the new upstream release
* debian/nut.install, debian/nut.manpages: remove obsolete reference to
megatec and megatec_usb, now respectively replaced by blazer_ser and
blazer_usb
* debian/nut.docs: limit distributed documentation
* debian/control:
- Wrap build-dependencies
- Change nut-cgi Recommends to apache2 | httpd-cgi
* debian/nut.postinst: Only trigger USB subsystem, should Closes: #574769
* debian/patches/0002-fix_udev_action.patch: Use SUBSYSTEM instead of BUS
* debian/control, debian/rules,
debian/nut-hal-drivers.{docs,install,postinst,preinst}: Drop
nut-hal-drivers since Nut doesnt go into universe.
* Split patches/debian-changes-2.4.3-2ubuntu1 into
patches/0005-fix-nut-m4.patch and patches/9999-autoconf.patch
* Readd lost debian/patches0004-netvision-improvements-lp-600950.patch patch
(LP: #707050)
* debian/patches/0002-fix_udev_action.patch:
Change BUS to SUBSYSTEMS, since the former is deprecated. (LP: #692171)
* debian/nut.postinst: Uncomment missing call to adduser
* debian/control: Drop hal build dependency, we don't need the daemon to
build the package. Add a hal dependency to nut-hal-drivers, which is the
only thing that actually needs it.
* Merge from debian unstable. Remaining changes:
+ debian/control:
- Update maintainer as per spec.
- Add Breaks on nut-hal-drivers to ensure we have correct udev version.
- Drop libpowerman0-dev from the Build-Depends (currently in universe)
+ debian/{nut-cgi,nut}.postinst: add nut to the dialout and nut groups
unconditonally to hanle the upgrade from hardy release.
+ debian/nut-powerman-pdu.install, debian/nut-powerman-pdu.manpages: dropped for now.
+ debian/nut.links: must create the init script link, used if the upse needs to be powered down
(LP: #357583)
+ debian/nut.postinst: Update udevadm trigger.
"libusb_get_report: error sending control message:
Operation not permitted" error on some UPS devices. (LP: #572262)
+ debian/source_nut.py, debian/nut.install, debian/rules: Install apport hook.
+ debian/patches/netvision-improvements-lp-600950.patch: Add improvements
for netvision UPSes
+ Fix FTBFS with ld --as-needed.
+ Dropped:
- debian/patches/03_udev_rules_change.dpatch: Use debian's instead.
- debian/patches/04_nut_small-buffers.dpatch: Use debian's instead.
* debian/control:
- Bump Standards-Version to 3.9.1
- Update Vcs-* fields to new GIT repository
- Add myself as Uploaders
* Switch to dpkg-source 3.0 (quilt) format (Closes: #573601)
* debian/patches/0001-low_speed_usb_ups.patch: Use patch system for changes
that were applied directly in the source
* Add debian/gbp.conf file
* debian/watch: Bump version to 3
* Add debian/patches/0002-fix_udev_action.patch: Also set permission for
"change" udev ACTION (Closes: #557178)
* debian/nut.postrm: Do not try to remove nut user is deluser is not
installed anymore
* debian/nut.manpages: Install manpage nut.conf.5 (Closes: #528222)
* debian/copyright: Fix copyright-with-old-dh-make-debian-copyright
* Remove nut-snmp.lintian-overrides, not needed anymore
* debian/patches/0003-fix_spelling_and_typo.patch: Fix some spelling errors
* Add debian/libupsclient1.symbols file
* Add debian/nut.links: Re-add /etc/init.d/ups-monitor that was lost for
some reasons (Closes: #592351)
* debian/nut.lintian-overrides: Add override for
init.d-script-does-not-provide-itself /etc/init.d/ups-monitor
* Drop libupsclient1.post{inst,rm}: ldconfig call is added automatically by
debhelper
* debian/libupsclient1-dev.install: Do not ship /lib/libupsclient.la anymore
* debian/rules: Remove dpatch logic as we are using package source version
'3.0 (quilt)'
* debian/compat: Bump debhelper compatibility to 8
* Non-maintainer upload.
* drivers/libhid.c: Apply r2407 from upstream to fix bug with some
low speed UPS devices. (Closes: #583371)
* Fix FTBFS with ld --as-needed.
* debian/patches/netvision-improvements-lp-600950.patch: Add improvements for netvision UPSes
(LP: #600950)
* debian/source_nut.py, debian/nut.install, debian/rules: Install apport hook.
* debian/patches/04_nut-small-buffers.dpatch: Fix "libusb_get_report: error sending control message:
Operation not permitted" error on some UPS devices. (LP: #572262)
* debian/nut.postinst: Revert dropping of --action=change. "add" events must
not ever be triggered automatically.
* Add 03_udev_rules_change.dpatch: Run udev rules on change events, too.
* debian/control: grr...fix ftbfs.
* Merge from debian testing. Remaining changes (LP: #535152):
+ debian/control:
- Update maintainer as per spec.
- Add Breaks on nut-hal-drivers to ensure we have correct udev version.
- Drop libpowerman0-dev from the Build-Depends (currently in universe)
+ debian/{nut-cgi,nut}.postinst: add nut to the dialout and nut groups
unconditonally to hanle the upgrade from hardy release.
+ debian/nut-powerman-pdu.install, debian/nut-powerman-pdu.manpages: dropped for now.
+ debian/nut.links: must create the init script link, used if the upse needs to be powered down
(LP: #357583)
+ debian/nut.postinst: Update udevadm trigger.
+ Dropped:
- debian/patches/02-fix-trust-pw4130m.dpatch: No longer needed.
* New upstream release (Closes: #544390, #528222, #539747, #526811,
#562064)
* debian/nut.install, debian/nut.manpages:
- remove cyberpower driver and manpage
- add bestfortress, clone and ivtscd drivers and manpages
* debian/rules:
- change udev dir to /lib/udev (Closes: #522327)
- replace deprecated calls to 'dh_clean -k' by dh_prep (Closes: #536599)
* debian/rules, debian/nut.install, debian/nut.install,
debian/nut.README.Debian: install configuration files, without the
sample suffix (Closes: #528641)
* debian/nut.links: restored (Closes: #522506)
* debian/nut.init:
- source nut.conf instead of default/nut for POWEROFF_WAIT(Closes:
#538173)
- fix status checking (Closes: #538785)
- improve detection of non configured system and beautify related
output (Closes: #563112)
- use 'invoke-rc.d' instead of calling the reboot script directly
- add $remote_fs to Required-Start and Required-Stop
* debian/nut.postrm: remove udev files and simplify cleanup (Closes:
#541629)
* debian/control:
- remove Luca Filipozzi from the Uploaders list (Closes: #568987)
- update Standards-Version to 3.8.4
- remove the debconf dependency
- bump debhelper version to (>= 7) in Build-Depends, for dh_prep
- add Breaks on nut-hal-drivers to ensure we have correct udev version
* Remove debconf support since it was related to really old nut
version (Closes: #518056):
- remove nut-cgi.config, nut.config, nut-cgi.templates, nut.templates,
and po/ directory
- update nut-cgi.postinst
* debian/nut.dirs: remove /var/run/nut to conform to Debian Policy
* debian/nut.postint:
- create /var/run/nut if needed
- improve security checks
* debian/nut.README.Debian: add a security note for ups.conf
* debian/watch: URL update
* debian/patches/02-fix-trust-pw4130m.dpatch: Fix issues with Trust
PW-4130M UPS. (LP: #447586)
* Resynchronize with debian, remaining changes:
+ debian/control:
- Update maintainer field as per spec.
- Add Breaks on nut-hal-drivers to ensure we have correct udev version.
- Drop libpowerman0-dev from the Build-Depends (currently in universe).
- Remove the nut-powerman-pdu package for now.
+ debian/{nut-cgi,nut}.postinst: add nut to the dialout and nut groups
unconditionally, to handle the upgrade from hardy release.
+ debian/nut-powerman-pdu.install, debian/nut-powerman-pdu.manpages: dropped
for now.
+ debian/nut.links: must create the init script link, used if the ups
needs to be powered down. (LP: #357583)
+ debian/nut.init: Fix status_of_proc messages not to lie to the user (LP: #416182)
* Non-maintainer upload.
* nut.postinst: fix post-processing of nut.conf to avoid overriding
user settings (Closes: #531220)
* Merge from debian testing, remaining changes:
+ debian/control:
- Update maintainer field as per spec.
- Add Breaks on nut-hal-drivers to ensure we have correct udev version.
- Drop libpowerman0-dev from the Build-Depends (currently in universe)
- remove the nut-powerman-pdu package for now
+ debian/{nut-cgi,nut}.postinst: add nut to the dialout and nut groups
unconditionally, to handle the upgrade from hardy release.
+ debian/nut-powerman-pdu.install, debian/nut-powerman-pdu.manpages: dropped
for now
+ debian/nut.links: must create the init script link, used if the ups
needs to be powered down (LP: #357583)
+ debian/nut.init: Fix status_of_proc messages not to lie to the user (LP: #416182)
* Non-maintainer upload.
* nut.postinst: fix post-processing of nut.conf to avoid overriding
user settings (Closes: #531220)
* Non-maintainer upload.
* Fix length of extended descriptions of packages
in debian/control
* Fix pending l10n issues. Debconf translations:
- Galician (marce villarino). Closes: #524263
- Spanish (Noel David Torres Taño). Closes: #525125
- Vietnamese (Clytie Siddall). Closes: #548170
* debian/nut.init: Fix status_of_proc messages not to lie to
the user. (LP: #416182)
* Merge from debian unstable, remaining changes:
+ debian/control:
- Update maintainer field as per spec.
- Add Breaks on nut-hal-drivers to ensure we have correct udev version.
- Drop libpowerman0-dev from the Build-Depends (currently in universe)
- remove the nut-powerman-pdu package for now
+ debian/{nut-cgi,nut}.postinst: add nut to the dialout and nut groups
unconditionally, to handle the upgrade from hardy release.
+ debian/nut-powerman-pdu.install, debian/nut-powerman-pdu.manpages: dropped
for now.
+ debian/nut.links: must create the init script link, used if the ups
needs to be powered down (LP: #357583)
* Debconf templates and debian/control reviewed by the debian-l10n-
english team as part of the Smith review project. Closes: #520591
* [Debconf translation updates]
- Japanese. Closes: #521350, #518602
- Czech. Closes: #521662
- German. Closes: #518005
- Basque. Closes: #522390
- French. Closes: #522677
- Finnish. Closes: #522837
- Swedish. Closes: #522973
- Italian. Closes: #522987
- Russian. Closes: #523122
- Portuguese. Closes: #523600
* debian/nut.links: must create the init script link, used if the ups
needs to be powered down, LP: #357583
Fixes for LP: #348454
* debian/control: add dpatch to Build-Depends,
* debian/patches/*: back for the below fix
* debian/patches/01_epdu_fix.dpatch: fix an upstream problem with Eaton PDUs
vs untested PDUs from Raritan
* debian/rules: reactivate again dpatch rules
[ Arnaud Quette <aquette@debian.org> ]
* Fix FTBFS
* debian/control:
- drop libpowerman0-dev from the Build-Depends (currently in universe)
- remove the nut-powerman-pdu package for now
* debian/nut-powerman-pdu.install, debian/nut-powerman-pdu.manpages: dropped
for now
* Acknowledge closed bugs in upstream and Debian: LP: #1568, LP: #221737,
LP: #239025, LP: #278495, LP: #332030, LP: #332032
* Merge from debian unstable, remaining changes:
+ debian/control:
- Update maintainer field as per spec.
- Add Breaks on nut-hal-drivers to ensure we have correct udev version.
+ debian/{nut-cgi,nut}.postinst: add nut to the dialout and nut groups
unconditionally, to handle the upgrade from the hardy release (simply
uncommented).
+ debian/rules: pre merge the changes for Ubuntu (udev path and version),
(simply uncommented).
* debian/control:
- add Build-Depends libwrap0-dev to enable TCP wrappers support,
- remove again dpatch from Build-Depends,
- move back debconf to Depends since we don't use it anymore in the preinst,
- add udev to nut-hal-drivers Depends so that it can use udevadm.
* debian/rules:
- pre merge the needed changes for Ubuntu (udev path and version),
- deactivate again dpatch rules
- move the nut-cgi HTML files off /var/www to /usr/share/nut/www
- set dh_installdocs to ignore Makefile
- remove dh_installexamples
* debian/patches/*: removed since it doesn't address the issue
* debian/nut-snmp.lintian-overrides: added to address NetSNMP overlinking
* debian/nut.install:
- add an precise list of the configuration files (Closes: #254355),
- use a wildcard to specify the udev rules installation path
* debian/nut-hal-drivers.install: use a wildcard to specify the udev rules
installation path (either /etc or /lib)
* debian/nut-cgi.install: add an precise list of the configuration files
* debian/nut.preinst:
- remove previous udev rule if unchanged, otherwise move to new filename (ie
with a dash),
- don't call adduser or addgroup at all, since these operations should be
handled in the postinst,
- migrate /etc/default/nut content to /etc/nut/nut.conf (part #1)
* debian/nut-cgi.preinst: removed since its content is addressed by postinst.
* debian/nut-hal-drivers.preinst:
- remove previous udev rule if unchanged, otherwise move to new filename (ie
with a dash),
* debian/nut-hal-drivers.postinst:
- reinstate since it was lost in the 2.2.2-10 merge,
- use the safe way to install udev rules (udevadm trigger --action=change).
* debian/nut.postinst:
- use the safe way to install udev rules, as for nut-hal-drivers.postinst
(udevadm trigger --action=change)
- rework the user/group creation, and a commented add to the dialout group,
- migrate /etc/default/nut content to /etc/nut/nut.conf (part #2)
* debian/nut-cgi.postinst: rework the user/group creation, and a commented add
to the dialout group.
* debian/nut.postinst: reactivate the nut user removal upon purge
* debian/nut.init:
- use nut.conf instead of /etc/default/nut to start the right component(s)
- enforce the configuration checking
- add basic support for the status option (as required per LSB)
* debian/nut.default: removed since its content has been incorporated into
nut.conf
* debian/{nut-cgi,nut}.examples: removed since the sample configuration files
are now installed.
* debian/nut.README.Debian: reworked with a lot of update and completion.
* debian/nut-cgi.README.Debian: reworked with a lot of update and completion.
* New upstream release
* Acknowledge the use of debhelpers (Closes: #506583)
* debian/copyright: authors and licensing (GPL2+ and GPL3+) completion
* debian/control:
- add a Pre-Depends on debconf for nut and nut-cgi, and remove the according
Depends
- add ${misc:Depends} to all Depends
- add libpowerman0-dev to the Build-Depends
- add a new nut-powerman-pdu package
- add a Recommends on bash-completion for nut
- remove Shaul Karl from the Uploaders as per his request
* debian/nut-powerman-pdu.install, debian/nut-powerman-pdu.manpages: added for
the nut-powerman-pdu package
* debian/nut.install:
- also list the bash_completion entry
- list update due to upstream changes
* debian/nut.manpages: list update due to upstream changes
* debian/rules:
- comment the patching rules
- install the nut.bash_completion script
* debian/patches/*: removed the previous patches since fixed upstream
* debian/patches/01_snmp_ups_no_lcrypto.dpatch: add a patch to fix snmp-ups
overlinking with lcrypto (lintian possible-gpl-code-linked-with-openssl)
* debian/po/es.po: added Spanish debconf template translation (Closes:
512494)
* debian/po/ja.po: added Japanese debconf template translation (Closes:
512865)
* debian/watch: updated for the new 2.4 tree
* debian/nut.prerm: replace the direct call to the init script by invoke-rc.d
* debian/{nut-cgi,nut}.preinst: don't call adduser or addgroup *at
all*, these operations should be handled in the postinst. Since
this is the only custom action at all for nut-cgi, remove that
preinst completely.
* debian/{nut-cgi,nut}.postinst: add nut to the dialout
and nut groups unconditionally, to handle the upgrade from the hardy
release. LP: #222761, LP: #287781.
* debian/control: nut needs Pre-Depends: debconf instead of Depends:,
because we use debconf unconditionally in the preinst.
* reinstate debian/nut-hal-drivers.postinst, which was lost in a
merge; and fix it up to use udevadm trigger --action=change, the
safe way to install udev rules.
* have nut-hal-drivers Depend: on udev so it can use the above.
* fix up nut postinst to also use 'udevadm trigger --action=change'
* debian/rules: Install udev rules into /lib/udev/rules, bump versioned
dependency on udev.
* debian/nut.install, debian/nut-hal-drivers.install: Update path
* debian/patches/04-ubuntu-udev-rules-name.dpatch: Use a dash to
separate the name, not an underscore.
* debian/nut.preinst, debian/nut-hal-drivers.preinst: Remove previous
rules if unchanged, otherwise move to new filename.
* debian/control: Add Breaks to ensure we have correct udev version.
* Merge from debian unstable, remaining changes:
+ debian/control:
- Update maintainer field as per spec.
+ debian/nut{-cgi,-hal-drivers}.preinst:
- Add nut user to dialout group.
+ debian/nut.install
- Install the configuration files in /etc/nut.
* Merge from Ubuntu (Morten Kjeldgaard):
* debian/compat: changed to 6
* debian/control:
- bump Build-Depends on debhelper to (>= 6.0.7~) since we are now using
dh_lintian.
- add hal to Build-Depends since configure attempts to locate /usr/lib/hal
in order to define callouts path and device information path
* debian/rules: --prefix is back to /usr, --exec-prefix=/ and --libdir=/lib
instead, which has the desired effect of moving the libraries to /lib.
The many shell commands in debian/rules, for moving files from the
install directory to the package directories have all been replaced by
dh_* calls and matching <package>.* files.
* debian/{libupsclient1-dev.install, libupsclient1-dev.manpages,
libupsclient1.install, nut-cgi.install, nut-cgi.manpages,
nut-hal-drivers.install, nut-snmp.install, nut-snmp.manpages,
nut-xml.install, nut-xml.manpages, nut.install, nut.lintian-overrides,
nut.manpages}: added debhelper files.
* debian/nut.dirs: modified debhelper files
* debian/libupsclient1-dev.links: added to provide a link from
/usr/lib/libupsclient.so -> /lib/libupsclient.so.1.0.0
This is a transitional measure, to salvage packages that have not yet
been updated to the new library location. Can be removed sometime in the
future.
* debian/patches/03-configure.in.dpatch: patch to configure.in adding
AC_CONFIG_MACRO_DIR([m4])
* debian/rules: also move libupsclient.so to /lib, otherwise the link is
broken (Closes: #505101)
* debian/nut-cgi.postinst: test if /etc/nut exists before chmod'ing (Closes:
#502757)
* debian/nut.TODO.Debian: some update and completion
* Merge from debian unstable, remaining changes:
+ debian/control:
- Update maintainer field as per spec.
+ debian/nut{-cgi,-hal-drivers}.preinst:
- Add nut user to dialout group.
+ debian/rules:
- Move the configuration files to /etc/nut from examples.
* debian/nut.links: restored since it's now handled by insserv (Closes:
#500190)
* debian/changelog: fix a typo error
* debian/rules: move libupsclient.so.1 from /usr/lib to /lib (Closes:
#491591)
* debian/nut-cgi.README.Debian: fix the permissions on /etc/nut (Closes:
#492277)
* debian/control: add Vcs-Browser and Vcs-Svn fields
* debian/nut.links: removed to satisfy insserv (Closes: #492734)
* debian/po/it.po: add Italian debconf template translation (Closes:
#495781)
* debian/nut.preinst: force the nut user to be part of the extra group nut
(Closes: #493159)
* Merge from debian unstable, remaining changes:
+ debian/control:
- Update maintainer field as per spec.
+ debian/nut{-cgi,-hal-drivers}.preinst:
- Add nut user to dialout group.
+ debian/rules:
- Move the configuration files to /etc/nut from examples.
* tag this bug as closed by the 2.2.2 release (Closes: #490048)
* debian/nut.README.Debian:
- fix the serial udev advice (Closes: #490182)
- mention the UPS compatibility list (Closes: #447187)
* debian/po/de.po: update German debconf template translation (Closes:
#490128)
* debian/changelog: fix a typo on 2.2.2-2 release urgency
* debian/po/eu.po: add Basque debconf template translation (Closes:
#489580)
* debian/control:
- add a Build-Depends on autoconfi, automake, libtool for the below patch
- bump Depends on udev to 0.124-1 to complete the fix of #489831
* debian/rules: call autoreconf after patches application
* debian/patches/02_g_timeout_add_seconds_patch.dpatch: fix compilation
issue in the nut-hal-drivers code, when using a Glib older than 2.14
(Closes: #489742)
* debian/nut.postint: replace the call to udevtrigger by udevadm trigger
(Closes: #489831)
* debian/rules: fix a Lintian warning
(debian-rules-calls-debhelper-in-odd-order)
* debian/po/fi.po: add Finnish debconf template translation (Closes:
#489123)
* debian/po/ru.po: add Russian debconf template translation (Closes:
#489285)
* debian/po/vi.po: update Vietnamese debconf template translation (Closes:
#489393)
* debian/nut.templates: remove nut/change_system_user since it is not used
anymore (Closes: #486783)
* Merge from debian unstable, remaining changes:
+ debian/control:
- Update maintainer field as per spec.
+ debian/nut{-cgi,-hal-drivers}.preinst:
- Add nut to user to dialout group.
+ debian/rules:
- Move the configuation files to /etc/nut from examples.
* debian/rules: reactivate dpatch support
* debian/control: add dpatch back to Build-Depends
* debian/patches/00list: fix the matching of the NUT HAL .fdi file (Closes:
#471828)
* debian/po/fr.po: update French debconf template translation (Closes:
#486740)
* debian.po/de.po: update the German debconf template translation (Closes:
#487187)
* debian/po/sv.po: add Swedish debconf template translation (Closes: #488217)
* debian.po/cs.po: update the Czech debconf template translation (Closes:
#488355)
* debian/po/pt.po: update the Portuguese debconf template translation (Closes:
#488403)
* debian/po/sv.po: add Galician debconf template translation (Closes: #488380)
* debian/nut.config: fix a typo in comment
* debian/rules: fix HAL files installation paths (Closes: #486362)
* debian/control:
- fix conflicts (Closes: #486704, #486705)
- update Standards-Version to 3.8.0
* Merge from debian unstable, remaining changes:
+ debian/control:
- Update maintainer field as per spec.
+ debian/nut{-cgi,-hal-drivers}.preinst:
- Add nut to user to dialout group.
+ debian/rules:
- Move the configuration files to /etc/nut from examples
+ debian/patches/01_fix_megatec_regression.dpatch.
- Dropped no longer since its fixed in this version.
* New upstream release (Closes: #471828, #462468, #334105, #463150)
* acknowledges NMUs (Closes: #469855)
* debian/control:
- add the new nut-xml package and its libneon dependency
- add the new libupsclient1 and libupsclient1-dev packages, with the latter
replacing nut-dev (Closes: #419684)
- remove dpatch dependency
* debian/rules: update according to upstream changes
- replace --with-lib by --with-dev
- update HAL integration
- update for the nut-xml package
- distribute the shared version of libupsclient
- comment dpatch calls
* debian/nut.postinst, debian/nut-hal-drivers.postinst: use udevtrigger to
refresh the devices permissions (Closes: #469601, #475262)
* debian/changelog: fix a typo
* debian/nut.templates: fix the short and long descriptions
* debian/libupsclient1.postinst, debian/libupsclient1.postrm: added to
handle the calls to ldconfig
* debian/nut.init: fix the call to /etc/init.d/reboot by adding the missing
"stop" parameter (Closes: 482022)
* debian/*.template: minor rework of the Debconf templates (Closes: 444151)
* debian/patches/01_fix_megatec_regression.dpatch
- Fix more megatec_usb driver regressions. (LP: #215389)
* debian/patches/01_fix_megatec_regression.dpatch
- Updated patch thanks to Alexander I. Gordeev <lasaine -at-
lvk.cs.msu.su>. (LP: #209001)
* debian/patches/01_fix_megatec_regression.dpatch
- Readded support for various USB devices. (LP: #209001)
* Use udevtrigger to restart udev. (LP: #204612)
* Fix FTBFS.
* Fix udev rules. (LP: #204612).
* Cleaned up debian/control.
* Merge from debian unstable (LP: #203366), remaining Ubuntu changes:
+ debian/rules:
- Move the configuration files to /etc/nut from examples.
+ debian/nut{,-cgi,-hal-drivers}.preinst
- Add nut user to dialout group.
+ debian/control:
- Updated Maintainer field as per spec.
* Non-maintainer upload.
* Skip udev restart logic within chroots, closes: #469855.
* Move the configuration files to /etc/nut from examples. (LP: #85598)
* Add nut user to dialout group. (LP: #157079)
* Updated Maintainer according to specs.
* debian/po/de.po: update the German po-debconf translation (Closes:
#464466)
* nut-hal-drivers.preinst: created to add to HAL user to the NUT group
(Closes: #460392)
* debian/nut-hal-drivers.postinst: created to complete the above by
restarting udev after the rules file installation
* debian/changelog: Fix some Lintian reports (syntax and spelling errors)
* debian/nut.README.Debian: completed a bit more for #334105
* New upstream release (Closes: #439986)
* acknowledges NMUs (Closes: #447961, #445000)
* debian/watch: update the URL to point the 2.2 tree
* debian/rules:
- force --udev-dir to remove udev from Build-Depends while
keeping the feature (complete #447961 fix)
- limit the above fix to linux systems not to break build on
bsd and hurd these architectures (Closes: #460732)
- fix lintian debian-rules-ignores-make-clean-error and do some more
cleanup
- remove the empty directories /usr/{include,lib} from the nut package
* debian/nut.postinst: call invoke-rc.d instead of the udev init script
(Closes: #442331)
* debian/control:
- remove udev from Build-Depends
- update Standards-Version to 3.7.3
- remove Homepage from description and add it as a tag
- add libsnmp-dev as an alternate Build-Depends to libsnmp9-dev
* debian/po/nl.po: update the Dutch po-debconf translation (Closes: #447720)
* debian/po/fr.po: update the French po-debconf translation (Closes: #442102)
* debian/patches/*: removed since these have been applied upstream
* debian/patches/00list: emptied but kept for future use
* Non-maintainer upload with Arnaud's permission.
* debian/nut.postinst: restart udev only if it is running already
(Closes: #447961).
* debian/nut.preinst: ignore db_get errors for nut/remove_debian_conf,
thanks to Alexander Gerasiov for the patch (Closes: #445000).
* Fixed typo in the date of the 2.2.0-2 changelog entry (Augl -> Aug).
* debian/control: list udev as Build-Depends to allow the udev rules
inclusion (Closes: #437811)
* debian/nut.default: fix a typo error on UPSMON options comment (Closes:
#439407)
* debian/po/:
- add Brazilian Portuguese debconf templates translation (Closes:
#439793)
- update Portuguese debconf templates translation (Closes: 440369)
- update French debconf templates translation (Closes: 440524)
* debian/Makefile.am: update with the missing files
* debian/patches/03_libupsclient-config.dpatch: patch for the missing FLAGS
(Closes: #439985)
* New upstream release (Closes: #432909, #420016, #426033)
* debian/control:
- merge the nut-usb package into nut, and update the various needed
fields (Depends, Provides, Conflicts, Suggests and Description)
- requires at least libhal-dev 0.5.8
- complete the nut-hal-drivers Description (Homepage)
- update to policy 3.7.2
- add po-debconf to Build-Depends
* debian/rules:
- general rewrite since the upstream now use automake
- force the evaluation of DEB_HOST_ARCH_OS for dh_gencontrol
- force udev to empty on non Linux system, for dh_gencontrol
- remove the DH_COMPAT export
- update the nut-usb specifics, not needed anymore
- nut-hal-drivers also needs the udev rules
- call debconf-updatepo to clean debconf translations
* debian/compat: creation
* debian/nut-usb.*: remove these files, and put the content in the
matching nut.* files
* debian/nut.preinst: remove the old udev rule file (025_nut...) which
was manually installed, and now addressed upstream and called 52_nut.
* debian/nut.postinst: restart udev to apply the USB rules to the
already plugged devices
* debian/nut-hal-drivers.preinst: created to add the HAL user to
the nut group
* debian/po/nl.po: added Dutch po-debconf translation (Closes: #414756)
* debian/po/pt.po: added Portuguese po-debconf translation (Closes: #415189)
* debian/patches/01_udev_rules_subsystem_usb.dpatch: update the patch
* debian/patches/02_libupsclient.dpatch: patch for the missing FLAGS
* debian/nut.templates: rewrite and simplification
* debian/nut.config: rewrite and simplification
* debian/rules: call dh_installinit with the priority set to 50 to (Closes:
#385694)
* debian/nut.default, debian/nut.init: allow to specify options for upsd and
upsmon (Closes: #420020, #434503)
* debian/patches/01_udev_rules_subsystem_usb.dpatch: rework that
patch to be more generic
* debian/patches/*: add a patch to fix the udev rule SUBSYSTEM from
usb_device to usb (thanks to Joey Hess) (Closes: #409080)
* debian/control:
- replace the udev substvar by udev
- nut Conflicts with nut-{usb,snmps} <= 2.0.4 and nut-{usb,snmp}
Depends upon 2.0.5 (Closes: #407882)
* debian/rules: dh_gencontrol no more calls -V for udev
* New upstream release (Closes: #406045, #380304, #399741)
* debian/rules:
- replaces CHANGES by ChangeLog
- replace the dummycons installation by dummy-ups
- integrate the --with-htmlpath option
* debian/nut-cgi.docs: created to install data/html/README
* debian/nut.init: LSB compliance update
* debian/control: add lsb-base (>= 3.0-6) to Depends for LSB compliance
* acknowledges NMUs (Closes: #396704, #389350)
* debian/nut-usb.postinst: remove the symlinking of the udev file since it's
not useful anymore (Closes: #400215)
* native udev rules are now used (Closes: #359802, #380304)
* debian/po/de.po: add German po-debconf template translation (Closes:
#400285)
* debian/nut.config: change the medium priorities to high (Closes: #388945)
* debian/nut.init: improve drivers startup report
* Non-maintainer upload.
* Some polish on top of the previous NMU.
* Remove the hotplug alternative; we no longer support it, so it's no
longer acceptable in place of udev. Correspondingly, rename the
substvar to ${udev}. (Closes: #396704)
* Drop debian/nut-usbups.rules and use upstream's rules instead. Modify
debian/rules correspondigly, patch from Arnaud Quette.
* Non-maintainer upload.
* In the udev script, replace the RUN actions by MODE and GROUP actions, as
per suggestion from the maintainer; should fix permission issues.
(Closes: #396704)
* NMU
* not removing nut user on purge (Closes: #389350)
* debian/rules: replace $PWD by CURDIR to satisfy buildd
* debian/nut.default, debian/nut.init: make the bug 358696 workaround
optional as it might be dangerous under some circumstances (closes:
#358696)
* New upstream release
- driver do not use /var anymore when called for shutdown/poweroff
(closes: #332846)
- fixes the newhidups crash upon device reconnexion (closes: #354305,
#359769)
* debian/nut.preinst: syntax enhancement to avoid issue when the nut user
already exists (closes: #378970)
* debian/nut-cgi.postinst: fix wrong permissions (closes: #378818)
* debian/po/cs.po: update Czech translation of nut debconf messages (closes:
#366738)
* debian/nut.default, debian/nut.init: "poweroff" workaround to deal with
BIOS default of "On/Off state: Last state" and system halting itself
before the UPS cuts power (closes: #358696)
* debian/nut-usbups.rules: fix the broken udev rules (closes: #359801)
* debian/nut-usb.postinst: generate the /etc/udev/rules/ file
* debian/rules:
- install the right udev rule file (not the upstream one)
- install the debian/hotplug file as libhidups, as it's compatible
with hotplug and udev styles
* debian/rules:
- fix a wrong symlink for the udev rule files (closes: #354262)
- add a temporary workaround to clean drivers/tripplite_usb
* debian/nut.init: fix the creation of the PID directory, as /var is now volative.
This bug has been identified in Ubuntu (Launchpad #6679)
* debian/nut-cgi.postrm: suppress the deletion of the nut user as it's not
needed (closes: #319395)
* debian/nut-cgi.preinst: suppress that file as we do not need to check and create
the nut user and group for nut-cgi
* debian/nut-cgi.postinst: enhanced to ensure the /etc/nut directory and nut-cgi
configuration files are readable by others
* debian/nut-cgi.README.Debian: improve the documentation about configuration
files permissions
* New upstream release
- include the improved USB driver (closes: #300115)
- fix mge-utalk regression (closes: #315431)
- fix USB device claiming and logging (closes: #322901)
* debian/nut-cgi.config: complete the typo fixes from 2.0.2-1 and remove exit
calls (closes: #308215)
* debian/nut.config: remove exit calls
* debian/hotplug: add this file to manage hotplug and udev style permissions settings
* debian/nut-usbups.rules: embed a modified version of the upstream file
* debian/control:
- make hotplug | udev Depends conditionnal, from rules
- remove libusb-0.1-4 Depends as it is already listed with shlibs:Depends
* debian/rules:
- generate debian/control Depends for hotplug | udev
- also install udev files (closes: #338738, #332939)
- call the clean rule before distclean
* debian/nut.README.Debian:
- update the Installation §2 to reflect udev changes on serial port permissions.
Users need to manually add the nut group to the dialout group (closes: #325878,
#334105)
- some other minor update
* debian/nut-cgi.postinst: load confmodule
* debian/nut-hidups/*: remove this unneeded directory
* debian/control:
- Update build dependency from libsnmp5-dev to libsnmp9-dev (closes:
#326410)
- Changes nut-usb wrong dependency from libusb-dev to libusb-0.1-4 (closes:
#320315)
- add debconf (>= 0.5.00) and adduser to nut/nut-cgi Depends
* debian/copyright: update the FSF address and the Authors
* debian/po/vi.po: add the Vietnamese translation for debconf, from Clytie
Siddall ((closes: #316327)
* New upstream release:
- build respect LDFLAGS (closes: #265439)
- fix etapro brokeness (closes: #305730)
- fix shutdown/restart problems with mge-shut (closes: #302190)
- fix mge-utalk support for older units (closes: #315431)
* debian/po/fr.po: update the French debconf templates, thanks to Michel
Grentzinger (closes: #306541)
* debian/rules:
- install hotplug files for the newhidups USB driver
- suppress the snmp-ups.8 manpage workaround
* debian/nut-usb.prerm: created to remove hotplug files
* debian/control:
- add hotplug Depends for nut-usb
- upgrade Debian Policy to 3.6.2
* debian/patches/*: remove all patch and empty 00list as all has
been fixed upstream
* debian/nut-cgi.config: integrate the typo fixes that was blocking
upgrade from woody to sarge
* debian/nut-cgi.preinst: remove an unneeded blank line
* acknowledge NMU from Craig Small (closes: #302189)
* debian/patches/01_cleanSourceFromlibupsclient.dpatch: removed as it
has been fixed upstream in 2.0.1
* debian/patches/00list: re enabled for the below patch
* debian/patches/01_upsstatsCgiNoHostCrash.dpatch: added while waiting
for the upstream fix (closes: #302902)
* debian/nut-cgi.templates: added nut-cgi/major_template_changes
* debian/nut-cgi.config: use nut-cgi/major_template_changes (closes:
#301184)
* debian/nut-cgi.README.Debian: reworked, and mention upgrade and
installation.
* debian/nut.README.Debian: mention the missing UPGRADING file, and complete
the upsmon.conf lines with the mandatory POWERDOWNFLAG and SHUTDOWNCMD
(closes: #302182)
* debian/nut.templates: add nut/2_0_upstream_changes to deal with the new
changes
* debian/nut.config: use the above nut/2_0_upstream_changes (closes:
#301060)
* Non-maintainer upload
* NUT nows powersdown Closes: #302189
* debian/control: add missing Build-Depends for dpatch, thanks to Kurt
Roeckx (closes: #298218)
* New upstream release (closes: #247671, #283539)
* debian/watch: update URL to match the current 2.0 stable tree
* debian/rules:
- change install-misc target to install-lib following the upstream rule
name change
- error reporting enhancements, thanks to Karl Shaul (inserted a set -e at
the start of every for loop ; from Debian Policy §4.5).
- workaround to include dummycons test driver and its manpage in nut-dev
while waiting for an upstream rule
- workaround to remove snmp-ups manpage from the nut package, to avoid a
file conflict with nut-snmp, while waiting for an upstream rule
- remove the workaround from 1.4.2-2 to suppress libupsclient.a and
newhidups upon make clean
- comment the "conf files workaround" as it's no more needed
* debian/control:
- add nut-dev to nut Suggests
- complete nut-dev to include dummycons testing driver
- add libusb (>= 0.1.8) nut-usb Depends to benefit of the kernel driver
unbind feature (needed for USB models other than MGE UPSs)
- suppress libgd1 from Build-Depends to fix a DebCheck warning, as it
is listed in Section oldlibs
* debian/nut.README.Debian: add a section "(3) /etc/nut/upsd.conf"
and add references to sample config files and UPGRADING information
(closes: #269485)
* debian/nut.TODO.Debian: add this file to track planned and unfinished
tasks
* debian/nut-cgi.README.Debian: improve a bit the text
* debian/nut.init: test powerdown flag (upsmon -K) and use the new
upsdrvctl exit codes (thanks to Karl Shaul)
* debian/po/cs.po: add Czech translation of debconf templates (patch from
Miroslav Kure) (closes: #283225)
* debian/patches: add basic infrastructure for dpatch
* debian/control: add nut-dev package with NUT lib and headers (closes:
#263937)
* debian/rules: change install-misc for the above nut-dev.
* debian/control: invert apache and httpd in nut-cgi Recommends to solve a
lintian warning
* New upstream release
* debian/control: change Homepage URL to "www" instead of "random" and
remove trailing slash / dot (closes: #254084)
* debian/control: add apache to nut-cgi Recommends to have a non-virtual
package alternative
* debian/control: add libusb-dev version in Build-Depends (closes: #248952)
* debian/copyright: update upstream URL and copyright owners (closes:
#242422)
* debian/po/ca.po: add Catalan translation of debconf templates (patch from
Aleix Badia i Bosch) (closes: #248741)
* debian/nut-cgi.README.Debian: added to describe nut-cgi configuration
(thanks to Marius Gedminas) (closes: #249825)
* debian/nut.README.Debian: minor change
* debian/control: add libusb-dev to Build-Depends (closes: #240586)
* debian/rules: workaround to clean libupsclient.a and newhidups (complete
the above)
* New upstream release
* Fixes mge-shut settings and shutdown problems (closes: #232402, #234037)
* debian/nut.init: fixes powerdown rule to prevent from forced UPS shutoff
upon normal shutdown, and add a warning when POWERDOWN flags isn't
defined, thanks to Loic Le Loarer (closes: #236092)
* debian/control: update nut-usb Description to reflect the add of newhidups
and energizerups drivers.
* debian/rules: update nut-usb build and install rules to match the new ones
* recall previously malformed closed bug (closes: #227965, #227964)
* debian/control: Build-Depends to allow libgd*-noxpm (closes: #231153)
* debian/control: update Homepage address
* debian/watch: update target address
* New upstream release
* debian/po/*: add gettext support for debconf templates (patch from Michel
Grentzinger) (Close: #227965)
* debian/po/fr.po: add French translation of debconf templates (patch from
Michel Grentzinger) (Close: #227964)
* debian/nut.postrm: fix inverted test with -z (fix a purge error)
* debian/nut.postrm: same as above
* debian/nut.postrm: suppress check_and_delete_group() as it is not useful
* debian/nut-cgi.postrm: same as above
* debian/nut.postinst: test if /etc/nut exists before chmod'ing (fix an
install error)
* debian/nut.preinst: wider check for user/group creation (closes: #217980)
* debian/nut.postrm: rework purge rule for user/group deletion (2nd part of
the above fix)
* debian/nut-cgi.postrm: rework purge rule for user/group deletion (2nd part of
the above fix)
* debian/nut-cgi.preinst: wider check for user/group creation (same as
above)
* debian/rules: suppress {nut,nut-cgi}/etc/nut/*.sample that were wrongly
installed (linked to #172217)
* debian/nut.examples: created to complete above fix
* debian/nut-cgi.examples: created to complete above fix
* debian/nut.postrm: suppress /etc/nut/*.sample file (to correct above
problem)
* debian/nut-cgi.postrm: suppress /etc/nut/*.sample file (same as above)
* Maintainer upload (forgotten previously), closes: #200182, #203061
* clients/Makefile.in: install parseconf.h to fix compilation error with wmnut
* man/Makefile.in: fix a broken upstream rule (hidups manpages installed two
times) that prevent from installing nut-usb package. This will be fixed in
the next upstream
* man/Makefile.in: fix a broken upstream rule (powernet and snmp-ups
manpages installed two times) that prevent from installing nut-snmp package
* New upstream release
* clients/Makefile.in: suppress the one line patch to install parseconf.o
(from 1.4.1-pre2-1). This is now cleanly addressed by the upstream source
by installing libupsclient.a (closes: #216496)
* debian/rules: change dh_shlibdeps's exclude from upsfetch.o to libupsclient.a
* debian/nut.preinst: fix install rule to catch all cases of nut user and group
needed creation. Previously, post purge install case was not (closes: #217980)
* debian/rules: suppress the work-around for nut-usb package following
the upstream correction (from 1.4.1-pre1-2)
* debian/control: Final package take over ; switch Luca Filipozzi as
co maintainer, and Arnaud Quette as new maintainer.
* debian/watch: point the authoritative download server (penguin.harrison)
and stable releases ("nut/release/1.4/" directory ; it won't work for
final 1.4.1, but for 1.4.2)
* debian/nut.postrm: rework purge rule to suppress a warning
* New upstream release
* debian/control: created package nut-usb for finer deps management
* debian/rules: added rules for nut-usb package, and a work-around
for install directories creation while waiting for upstream correction.
* drivers/Makefile.in: suppressed hidups from PROGS, thanks to the above
* debian/control: repeat Homepage for every sub-package
* debian/control: completed nut Suggests
* debian/control: changed Arnaud Quette address to the good Debian one
* debian/rules: suppress the work-around for nut-snmp package following
the upstream correction(from 1.4.1-pre1-1)
* debian/nut-cgi.preinst: always test if nut user exist as nut-cgi
can be installed without nut, so not having nut user created (closes:
Bug#213730)
* debian/nut-cgi.postinst: chown root:nut to address a potential security
issue (see 1.2.1-2)
* clients/Makefile.in: one line patch to install parseconf.o. This solve
a problem with wmnut package (can't build anymore due to unresolved
symbols). This point will be more cleanly address in next upstream
* debian/control: rewrotte descriptions to follow Debian Policy. A
further enhancement will be to use debian/nut.substvars (thanks
to Shaul Karl) (closes: Bug#209569)
* drivers/Makefile.in: added back hidups to PROGS (closes: Bug#208248)
* debian/control: added libgd2-* to Build-Depends to allow more choices
* debian/control: added Shaul Karl as co-maintainer
* debian/control: changed Arnaud Quette address to Debian's one
* New upstream release (closes: Bug#203856)
* recall ignored 1.4.0-2 changes (closes: Bug#204193, Bug#199895)
* debian/nut.preinst: already solved bug in 1.4.0-3 (closes:Bug#206229)
* debian/control: created package nut-snmp (closes: Bug#195645)
* debian/rules: added rules for nut-snmp package, and a work-around
for install directories creation while waiting for upstream correction.
* debian/control: change Build-Depends to "libgd-xpm-dev | libgd-dev" to
allow easy woody backport (thanks to Martin Maney)
* debian/nut.prerm: wait for upsd stop before calling the remove tempo
* debian/nut.prerm: fix a post removal warning by adding a tempo
(1 sec) before removing /var/run/nut
* debian/nut.preinst: reworked install rule (thanks Shaul) (closes:Bug#204153)
* debian/watch: update URL to point NUT 1.4 (thanks to Shaul Karl)
* debian/nut.dirs: add /var/run/nut (thanks Shaul) (closes: Bug#204193)
* debian/nut-cgi.preinst: created for allowing separate installation
(without nut) (closes: Bug#199895)
* debian/rules: remove the "--with-group=nut" call to configure as it
is obsolete (thanks Shaul)
* debian/control: add Arnaud Quette as co-maintainer
* New upstream release (closes: Bug#203061)
* debian/nut.init: change Init-script ordering (start_stop_server) to
address data stale warning (closes: Bug#200182)
* New upstream release
* debian/rules: gidNumber of group 'nobody' is 65534 not 65535
(thanks Shaul) (closes: Bug#180532)
* debian/nut.README.Debian: s/smartapc/apcsmart/ (closes: Bug#177713)
* debian/nut.postinst: chown root:nut instead of chown nut:nut for files
in /etc/nut/* and for the dirs /etc/nut, /var/run/nut, /var/lib/nut;
this addresses a potential security issue as described in the comments
contained in /etc/nut/upsmon.conf (closes: Bug#180059)
* debian/nut.init: sysadmins might modify POWERDOWNFLAG in
/etc/nut/upsmon.conf without realizing that it is hard coded in the
/etc/init.d/nut init script; fix the init script to parse the
configuration file for the value of POWERDOWNFLAG (closes: Bug#179686)
* debian/nut.init: print a message prior to shutdown (closes: Bug#180242)
* New upstream release
* debian/control: nut provides/conflicts ups-monitor (closes: Bug#170655)
* debian/nut.postinst and debian/nut-cgi.postinst:
test -f file before chown/chmod (closes: Bug#170553)
* debian/nut.postinst: fix permissions on /var/lib/nut (closes: Bug#173318)
* debian/nut.preinst: change how the 'nut' user/group are detected and
created (closes: Bug#173321)
* between 1.1.11-1 incorrectly installed conffiles into /etc/nut
with the extension .sample; fortunately, this release of the package
did not migrate to testing and since 1.1.11-2 the .sample extension
has not been used (closes: Bug#172217)
* debian/nut.preinst: change the way the nut user/group are detected
before adduser is called (closes: Bug#170653)
* debian/nut.README.Debian: fixed minor doc error (Closes: Bug#173673)
* New upstream release
* debian/nut-cgi.postinst: fix permissions on /etc/nut/hosts.conf and
/etc/nut/upsset.conf so that they are world readable (Closes: Bug#167332)
* debian/nut.init: added sleep 5 to allow for an orderly restart (thanks
to Shaul Karl for pointing this out)
* New upstream release (urgency high due to SECURITY FIX)
* SECURITY FIX: a file permission problem potentially exposes
non-system usernames/passwords in /etc/nut/upsd.users that can be used
to DoS a machine running nut by contacting the nut daemon and instructing
it to power off the machine; fixed.
* debian/nut.postinst: change permissions of /etc/nut/upsd.users and
other conffiles to 640 (Closes: Bug#165445)
* debian/nut.config: use db_fset to reset the boolean question that prompts
users to accept whether to continue with the installation of this version
of nut should they answer no (Closes: Bug#165376)
* debian/control: make nut-cgi Replace nut so that conflicting files
can be installed (Closes: Bug#165049)
* drivers/Makefile.in: restored original version that doesn't build
hidups, snmp-ups or powernet; hidups doesn't build on m68k; snmp-ups
and powernet require libsnmp5-dev but libsnmp5-dev requires OpenSSL;
unfortunately, upstream's license doesn't have the OpenSSL exclusion
clause... work is proceeding on porting to gnutls
* drivers/Makefile.in + debian/rules: figured out a mechanism to build
hidups on those architectures that have /usr/include/linux/hiddev.h
* debian/control: build-depend on libgd-xpm-dev (really closes Bug#164832)
* changed build dependencies to avoid depending on a pure-virtual package
without providing a default (thanks Junichi Uekawa) (Closes: Bug#164832)
* debian/rules calls $(MAKE) install-misc so that the header and the .o file
are released with the nut package (too small for a nut-dev package?)
* New upstream release
(Closes: Bug#151047, Bug#155943, Bug#153174, Bug#160178, Bug#164024)
* the "Hey Dorothy, you aren't in Kansas anymore" release
* warning: significant changes since nut 0.45.5; specifically:
- upsd listens on a different port (was 3305; now 3493 (IANA-assigned))
- configuration file formats have changed
- ups driver internals haved changed: 'common main.c' + upsdrvctl
- some ups drivers that were not ported to the new common model have
been dropped by the upstream author (submit a patch to rectify)
- the init script is significantly simpler
- the daemons will NOT restart on upgrade from from 0.45.5 or earlier
- there is an /etc/default/nut file that defines whether the daemons
will be started
- removed nut-doc package... far too small to merit being on its own
* "unlink .sock file before starting up; this was keeping the drivers down
after a system crash where the .sock files remained" -- upstream
(Closes: Bug#149150, Bug#139859)
* debian/control: nut and nut-cgi suggest rather than recommend
the documentation package, nut-doc (Closes: Bug#144763)
* debian/nut-cgi.dirs: change absolute paths to relative (Closes: Bug#144746)
* debian/rules: remove upsdrvctl.8 from package (Closes: Bug#143099)
* New upstream release
* debian/rules: moved model daemons to /lib/nut to reduce chance of
namespace conflicts (Closes: Bug#141209)
* debian/rules: moved sample configuration files to
/usr/share/doc/nut/examples (Closes: Bug#140472)
# debian/postinst: change mode and ownership of files in /etc/nut/ on
configure to allow ready by nut/nut (Closes: Bug#142116)
* added runtime dependency on adduser (Closes: Bug#137887)
* Changed debian/rules to call install-misc which installs the development
files upsfetch.[oh]. There are too few development files to merit a
nut-dev package.
* New upstream release
* New upstream release (Closes: Bug#131673)
* applied POWERDOWNFLAG upstream-patch (Closes: Bug#111979)
* applied apcsmart calibration user-patch (Closes: Bug#111978)
* modified models/main.c so that it does a forceshutdown before
attempting to chdir into /var/lib/nut (Closes: Bug#112540)
* New upstream release
* Fixed conffile problem with nut-cgi package (Closes: #108687)
* New upstream release (Closes: #101105)
* Init script now poweroffs the UPS' correctly. (Closes: #96790)
* Changed section of nut-doc to 'doc' (Closes: #94842)
* Not upgrading to new upstream source (0.45.0) until it is released.
* Not upgrading to upstream source (0.44.3) since (0.45.0) is coming soon.
* init script follows policy (Closes: #90346)
* New upstream release
* modified configure.in so that it doesn't produce an error when it tests
for the existance of group "nut" (Closes: #88126)
* New upstream release
* create pidfile modifications reworked to use upstream's writepid() function
* modified init script to support these changes... note that users MUST
follow the convention for the UPS directives in the sample upsd.conf;
a warning has been placed in said file
* modified prerm and postinst so that the daemon(s) is restarted only in the
postinst rather than stopped in prerm and started later in postinst thereby
stopping the daemon(s) shortest possible time (Closes: #83614)
* modified all the daemon(s)' source code so that they create pidfiles
* modified the init script so that it uses the pidfiles
* removed "function" keyword from init script (Closes: #83569)
* modified the pre and post scripts so that #DEBHELPER# is at the bottom
* modified debian/rules so that nut-doc is created (Closes: #85059)
* added support for MGE UPS (thanks to Ryan Murray) (Closes: #83743)
* control file changed such that arch=any for nut-doc (Closes: #83323)
* Added a build conflict against libgd-gif1-dev because it provides
libgd-dev but does not have PNG support. (Closes: #82607)
* Fixed a path problem in debian/rules that had manpages installing
in /share/man/man8 instead of /usr/share/man/man8.
* Modified README.Debian to address bad doc path (Closes: #82460)
* Slight improvements to README.Debian, as well.
* New upstream release
* fixed path problem with cgi files; they are in /usr/lib/cgi-bin/nut now
* the following changes suggested by Patrik Rak (Closes: #77144, #77195)
* added better preinst(install) checks for group membership
* modified upstream upsd.conf to use correct paths in the UPS directives
* modified upstream upsd.conf to have better ACCESS directive examples
* modified upstream upsmon.conf to have better MONITOR directive examples
* modified upstream upsmon.conf to use a different POWERDOWNFLAG location
(location must be on the root filesystem... otherwise powerdownflag is
not found!)
* modified init script to parse upsmon.conf for the POWERDOWNFLAG location
* modified init script's poweroff section so that all args are recognized
* improved the documentation, primarily README.Debian
* installation scripts modified so that the dependency on adduser >= 3.14
can be removed; this allows for the creation of potato packages
* the nut user is no longer part of the dialout group; users will have to
manually change the permissions on the serial port devices;
a nut group is created at the same time as the nut user; users should use
the nut group for the serial port permissions: chown root.nut /dev/ttyS0
(suggested by Shaul Karl and Patrik Rak)
* the cgi scripts are moved to /usr/lib/cgi-bin/nut/*
(suggested by Shaul Karl)
* init script changed significantly to address argument passing problems
(reported by Shaul Karl)
* removed else clause on detection of existing "nut" user (Closes: #76721)
"install" creates the user nut; "remove" doesn't remove it, "purge" does;
a re-"install" would find an existing "nut" user and exit on error; fixed
* fixed a possible bashism (Closes: #72711)
* New upstream release
* serious repurcussion to existing users of nut... the configuration files
have changed somewhat... a critical debconf warning informs the user of
this fact
* binaries are to remains in /sbin (Closes: #69525)
* init script no longer relies on /usr being mounted (Closes: #70033)
*
* Moved man pages from section 1 to section 8. (Closes: #68819)
* nut-doc suggest rather than recommends nut and nut-cgi. (Closes: #69400)
* Minor fixes to packaging scripts (Closes: #67649).
* Created new doc package: nut-doc.
* Minor fixes to init script and to list of undocumented binaries.
* New upstream release
* fixes: Bug#67316: nut: default permissions could reveal passwords
Files in /etc/nut are now 600 by default.
* fixes: Bug#67314: nut: uses old FHS directory /var/state
Now uses /var/lib as per FHS guidelines.
* fixes: Bug#66988: nut_0.43.2-1(unstable): Missing build dependencies
Added debhelper to the build dependencies.
* Initial Release.
* Modification to upstream source: configure.in, common/common.c,
and models/upscommon.c changed to support different configuration
options... --with-user and --with-group which accept a username
and a groupname (rather than a uid/gid as before).
* Modification to upstream source: /var/state/nut is used instead
of /var/state/ups in conf/upsd.conf.