acpid (1:2.0.32-1ubuntu1) focal; urgency=medium * Merge from Debian unstable. Remaining changes: - debian/patches/silent.patch: change pointless shutdown message "exiting" from NOTICE to DEBUG level, such that it's not emitted by default. - don't recommend acpi-support-base. * Dropped changes, included in Debian: - Ship acpid.service disabled, but .path and .sockets enabled. -- Balint Reczey Thu, 28 Nov 2019 14:01:54 +0100 acpid (1:2.0.32-1) unstable; urgency=medium * New upstream release (2.0.32). (Closes: #933230) * New maintainer (Closes: #932785) * Update package to use debhelper-compat (= 12) * Update debian/copyright to machine readable format (DEP-5) * debian/watch: - Update file to version 4 - Update upstream URL * debian/control: Add ${misc:Pre-Depends} * debian/acpid.service: Add Documentation key * Remove acpid.postinst, it was intended for supporting ancient package version * acpid.preinst: Remove support for ancient package vresion (1.0.8-7) * Bump Standards-Version to 4.4.0. No changes required * Enable acpid.socket and acpi.path on installation. Thanks to Balint Reczey . Closes: #928253 -- Josue Ortega Sun, 18 Aug 2019 18:42:00 -0600 acpid (1:2.0.31-2) unstable; urgency=medium * Orphan package -- Michael Meskes Tue, 23 Jul 2019 10:42:02 +0200 acpid (1:2.0.31-1.1) experimental; urgency=medium * Non-maintainer upload. * Add native runit script (Closes: #923871) -- Dmitry Bogatov Sat, 22 Jun 2019 20:46:50 +0000 acpid (1:2.0.31-1ubuntu2) disco; urgency=medium * Ship acpid.service disabled, but .path and .sockets enabled. Also don't start acpid.service on installation. -- Balint Reczey Fri, 01 Mar 2019 17:41:32 +0100 acpid (1:2.0.31-1ubuntu1) disco; urgency=low * Merge from Debian unstable. Remaining changes: - debian/patches/silent.patch: change pointless shutdown message "exiting" from NOTICE to DEBUG level, such that it's not emitted by default. - don't recommend acpi-support-base. -- Steve Langasek Thu, 31 Jan 2019 23:14:26 -0800 acpid (1:2.0.31-1) unstable; urgency=medium [ Ondřej Nový ] * d/control: Deprecating priority extra as per policy 4.0.1 * d/changelog: Remove trailing whitespaces * d/control: Set Vcs-* to salsa.debian.org [ Michael Meskes ] * New upstream version 2.0.31 (Closes: #909399) * Bumped Standards-Version, no changes needed * Bumped debhelper compat to 11 * Added hardening flags. -- Michael Meskes Thu, 22 Nov 2018 15:03:21 +0100 acpid (1:2.0.28-1ubuntu1) artful; urgency=low * Merge from Debian unstable. Remaining changes: - debian/patches/silent.patch: change pointless shutdown message "exiting" from NOTICE to DEBUG level, such that it's not emitted by default. - don't recommend acpi-support-base. * Dropped changes, included in Debian: - Do not start when inside a container * Dropped changes: - Replace init script with Upstart job: upstart is obsolete post-16.04 and we are already using a systemd unit instead. - Source /usr/share/acpi-support/power-funcs in powerbtn.sh: this file is long gone (pre-13.10) so no need for the delta. - Install /etc/acpi/events/powerbtn and /etc/acpi/powerbtn.sh: drop, since the script is a no-op when systemd-logind is running and systemd-logind is now *always* running, there's no reason to install these anymore or carry a delta to them. - debian/acpid.install, debian/acpid.preinst, debian/rules: continue installing /etc/acpi/events/powerbtn and /etc/acpi/powerbtn.sh, deferring the migration to acpi-support-base; and drop the Recommends: on acpi-support-base for the same reason. -- Steve Langasek Thu, 27 Apr 2017 21:28:10 -0700 acpid (1:2.0.28-1) unstable; urgency=medium * Move to source format 3.0 to not have to repack upstream's source tarball. * Make sure acpid is not run in a container. Thanks to Simon Deziel (Closes: #820482) * New upstream version 2.0.28 * Fix LSB init output for more consistency. Thanks to Guillem Jover (Closes: #823073) * Bumped Standards-Version to 3.9.8, no changes needed. -- Michael Meskes Tue, 20 Sep 2016 12:14:13 +0200 acpid (1:2.0.26-1ubuntu3) artful; urgency=medium * No-change rebuild to pick up -fPIE compiler default in static libraries -- Steve Langasek Fri, 21 Apr 2017 20:45:17 +0000 acpid (1:2.0.26-1ubuntu2) xenial; urgency=medium * Do not start when inside a container (LP: #1568155) -- Simon Deziel Fri, 08 Apr 2016 21:25:13 +0000 acpid (1:2.0.26-1ubuntu1) xenial; urgency=low * Merge from Debian unstable. Remaining changes: - Replace init script with Upstart job + This does not load modules, unlike the init script, since these are all loaded by ACPI:* modaliases now (and thus by udev) - debian/acpid.install, debian/acpid.preinst, debian/rules: continue installing /etc/acpi/events/powerbtn and /etc/acpi/powerbtn.sh, deferring the migration to acpi-support-base; and drop the Recommends: on acpi-support-base for the same reason. - Source /usr/share/acpi-support/power-funcs in powerbtn.sh - debian/powerbtn.sh: ensure that /usr/share/acpi-support/power-funcs exists before sourcing it; note that acpid does not depend on acpi-support (which is fine, as it brings in lots of X dependencies not appropriate for servers); this fix will allow Ubuntu servers (especially those in VMs) to run acpid and catch and handle power button events again. - debian/powerbtn.sh: gnome-power-manager is no more, check for gnome-settings-daemon now. This fixes immediate shutdown when the power button is pressed. - Change pointless shutdown message "exiting" from NOTICE to DEBUG level, such that it's not emitted by default. - debian/powerbtn.sh: add support for mate-settings-daemon, unity-settings-daemon - ./debian/powerbtn.sh: Don't do anything if logind is running, as that already handles power button presses. This fixes unconditional shutdowns if a desktop environment wants to handle the power key by itself (and inhibits logind). (LP: #1201180) -- Dimitri John Ledkov Tue, 09 Feb 2016 22:43:25 +0000 acpid (1:2.0.26-1) unstable; urgency=medium * Imported Upstream version 2.0.26 (Closes: #808015) * Updated watch file * Fixwed typo in powerbtn.sh (Closes: #805865) -- Michael Meskes Tue, 09 Feb 2016 17:34:08 +0100 acpid (1:2.0.25-1) unstable; urgency=medium * Imported Upstream version 2.0.25 -- Michael Meskes Tue, 01 Sep 2015 13:47:25 +0200 acpid (1:2.0.23-2) unstable; urgency=medium * Corrected homepage URL (Closes: #767816) * Added path based activation so acpid gets started if events are to be processed. (Closes: #766991) * Bumped Standards-Version to 3.9.6, no changes needed. -- Michael Meskes Sat, 08 Nov 2014 17:36:34 +0100 acpid (1:2.0.23-1ubuntu2) xenial; urgency=medium * Fix FTBFS due to signed/unsigned comparison. -- Dimitri John Ledkov Thu, 03 Dec 2015 14:35:03 +0000 acpid (1:2.0.23-1ubuntu1) vivid; urgency=medium * Merge from Debian unstable. Remaining changes: - Replace init script with Upstart job + This does not load modules, unlike the init script, since these are all loaded by ACPI:* modaliases now (and thus by udev) - debian/acpid.install, debian/acpid.preinst, debian/rules: continue installing /etc/acpi/events/powerbtn and /etc/acpi/powerbtn.sh, deferring the migration to acpi-support-base; and drop the Recommends: on acpi-support-base for the same reason. - Source /usr/share/acpi-support/power-funcs in powerbtn.sh - debian/powerbtn.sh: ensure that /usr/share/acpi-support/power-funcs exists before sourcing it; note that acpid does not depend on acpi-support (which is fine, as it brings in lots of X dependencies not appropriate for servers); this fix will allow Ubuntu servers (especially those in VMs) to run acpid and catch and handle power button events again. - debian/powerbtn.sh: gnome-power-manager is no more, check for gnome-settings-daemon now. This fixes immediate shutdown when the power button is pressed. - Change pointless shutdown message "exiting" from NOTICE to DEBUG level, such that it's not emitted by default. - debian/powerbtn.sh: add support for mate-settings-daemon, unity-settings-daemon - ./debian/powerbtn.sh: Don't do anything if logind is running, as that already handles power button presses. This fixes unconditional shutdowns if a desktop environment wants to handle the power key by itself (and inhibits logind). (LP: #1201180) -- Michael Vogt Mon, 03 Nov 2014 15:18:22 +0100 acpid (1:2.0.23-1) unstable; urgency=medium * Adapted build system to use dh_systems_* helpers. Thanks to Laurent Bigonville (Closes: #759541) * Imported Upstream version 2.0.23 -- Michael Meskes Thu, 28 Aug 2014 18:53:50 +0200 acpid (1:2.0.22-3) unstable; urgency=medium * Stop socket before upgrade or removal to make sure acpid isn't activated again. -- Michael Meskes Fri, 11 Jul 2014 11:05:53 +0200 acpid (1:2.0.22-2) unstable; urgency=medium * Made service file honor options from /etc/default/acpid. (Closes: #743611, #745589) -- Michael Meskes Tue, 17 Jun 2014 13:28:24 +0200 acpid (1:2.0.22-1) unstable; urgency=medium * Imported Upstream version 2.0.22 (closes: #738611) -- Michael Meskes Thu, 03 Apr 2014 10:48:59 +0200 acpid (1:2.0.21-1ubuntu3) utopic; urgency=high * No change rebuild against new dh_installinit, to call update-rc.d at postinst. -- Dimitri John Ledkov Wed, 28 May 2014 10:38:47 +0100 acpid (1:2.0.21-1ubuntu2) trusty; urgency=medium * ./debian/powerbtn.sh: Don't do anything if logind is running, as that already handles power button presses. This fixes unconditional shutdowns if a desktop environment wants to handle the power key by itself (and inhibits logind). (LP: #1201180) -- Martin Pitt Thu, 03 Apr 2014 14:53:35 +0100 acpid (1:2.0.21-1ubuntu1) trusty; urgency=medium * Merge with Debian; remaining changes: - Replace init script with Upstart job + This does not load modules, unlike the init script, since these are all loaded by ACPI:* modaliases now (and thus by udev) - debian/control: Bump build-dependency on debhelper for Upstart-aware dh_installinit - debian/acpid.install, debian/acpid.preinst, debian/rules: continue installing /etc/acpi/events/powerbtn and /etc/acpi/powerbtn.sh, deferring the migration to acpi-support-base; and drop the Recommends: on acpi-support-base for the same reason. - Source /usr/share/acpi-support/power-funcs in powerbtn.sh - debian/powerbtn.sh: ensure that /usr/share/acpi-support/power-funcs exists before sourcing it; note that acpid does not depend on acpi-support (which is fine, as it brings in lots of X dependencies not appropriate for servers); this fix will allow Ubuntu servers (especially those in VMs) to run acpid and catch and handle power button events again. - debian/powerbtn.sh: gnome-power-manager is no more, check for gnome-settings-daemon now. This fixes immediate shutdown when the power button is pressed. - Fix build failure with GCC 4.8. - Change pointless shutdown message "exiting" from NOTICE to DEBUG level, such that it's not emitted by default. - debian/powerbtn.sh: add support for mate-settings-daemon. * Drop changes (unnecessary delta, which does no harm): - debian/acpid.install, debian/acpid.links: Don't install socket and service files needed by systemd * New changes: - add support for unity-settings-daemon. -- Dimitri John Ledkov Wed, 19 Feb 2014 13:43:55 +0000 acpid (1:2.0.21-1) unstable; urgency=medium * Imported Upstream version 2.0.21 (closes: #732277) * Specify in acpid.init to start before lightdm and stop after lightdm. Thanks to Dmitrijs Ledkovs (Closes: #731543) * Fixed typo in default file. (Closes: #734420) * Stop passing start option to dh_installinit. (Closes: #723623) * Canonicalize VCS information. * Bumped Standards-Version to 3.9.5, no changes needed. -- Michael Meskes Fri, 17 Jan 2014 09:03:19 +0100 acpid (1:2.0.20-1) unstable; urgency=low * Imported Upstream version 2.0.20 (Closes: #719659) -- Michael Meskes Tue, 17 Sep 2013 10:26:14 +0200 acpid (1:2.0.19-1) unstable; urgency=low * Imported Upstream version 2.0.19 (Closes: #701234) -- Michael Meskes Tue, 28 May 2013 16:52:28 +0200 acpid (1:2.0.18-1ubuntu3) trusty; urgency=medium * Change pointless shutdown message "exiting" from NOTICE to DEBUG level, such that it's not emitted by default. (LP: #967229) -- Dimitri John Ledkov Tue, 04 Feb 2014 18:15:06 +0000 acpid (1:2.0.18-1ubuntu2) saucy; urgency=low * debian/powerbtn.sh: add support for mate-settings-daemon. (LP: #1184831) -- Nikolay Martynov Wed, 29 May 2013 22:50:46 -0400 acpid (1:2.0.18-1ubuntu1) raring; urgency=low * Merge with Debian; remaining changes: - Replace init script with Upstart job + This does not load modules, unlike the init script, since these are all loaded by ACPI:* modaliases now (and thus by udev) - debian/control: Bump build-dependency on debhelper for Upstart-aware dh_installinit - debian/acpid.install, debian/acpid.preinst, debian/rules: continue installing /etc/acpi/events/powerbtn and /etc/acpi/powerbtn.sh, deferring the migration to acpi-support-base; and drop the Recommends: on acpi-support-base for the same reason. - Source /usr/share/acpi-support/power-funcs in powerbtn.sh - debian/powerbtn.sh: ensure that /usr/share/acpi-support/power-funcs exists before sourcing it; note that acpid does not depend on acpi-support (which is fine, as it brings in lots of X dependencies not appropriate for servers); this fix will allow Ubuntu servers (especially those in VMs) to run acpid and catch and handle power button events again. - debian/powerbtn.sh: gnome-power-manager is no more, check for gnome-settings-daemon now. This fixes immediate shutdown when the power button is pressed. - debian/acpid.install, debian/acpid.links: Don't install socket and service files needed by systemd * Fix build failure with GCC 4.8. -- Matthias Klose Tue, 26 Feb 2013 09:01:13 +0100 acpid (1:2.0.18-1) unstable; urgency=low * Bumped Standards-Version to 3.9.4, no changes needed. * Make systemd able to start acpid via multi-user.target. Thanks to Michael Biebl (Closes: #699810) * Imported Upstream version 2.0.18 * Updated watch file to new location. -- Michael Meskes Sun, 17 Feb 2013 08:55:50 +0100 acpid (1:2.0.17-2) unstable; urgency=low * Bump to debhelper compat level 9 and use the DEB_CFLAGS_MAINT_{APPEND_PREPEND} options to change flags, trusting dh_auto_configure to do the right thing, so that we get support for cross-compilation and other niceties. Thanks to Steve Langasek (Closes: #696213) -- Michael Meskes Fri, 21 Dec 2012 13:29:25 +0100 acpid (1:2.0.17-1ubuntu2) raring; urgency=low * Bump to debhelper compat level 9 and use the DEB_CFLAGS_MAINT_{APPEND_PREPEND} options to change flags, trusting dh_auto_configure to do the right thing, so that we get support for cross-compilation and other niceties. -- Steve Langasek Tue, 18 Dec 2012 07:02:42 +0000 acpid (1:2.0.17-1ubuntu1) raring; urgency=low * Merge from Debian unstable (LP: #1076536), remaining changes: - Replace init script with Upstart job + This does not load modules, unlike the init script, since these are all loaded by ACPI:* modaliases now (and thus by udev) - debian/control: Bump build-dependency on debhelper for Upstart-aware dh_installinit - debian/acpid.install, debian/acpid.preinst, debian/rules: continue installing /etc/acpi/events/powerbtn and /etc/acpi/powerbtn.sh, deferring the migration to acpi-support-base; and drop the Recommends: on acpi-support-base for the same reason. - Source /usr/share/acpi-support/power-funcs in powerbtn.sh - debian/powerbtn.sh: ensure that /usr/share/acpi-support/power-funcs exists before sourcing it; note that acpid does not depend on acpi-support (which is fine, as it brings in lots of X dependencies not appropriate for servers); this fix will allow Ubuntu servers (especially those in VMs) to run acpid and catch and handle power button events again. - debian/powerbtn.sh: gnome-power-manager is no more, check for gnome-settings-daemon now. This fixes immediate shutdown when the power button is pressed. - debian/acpid.install, debian/acpid.links: Don't install socket and service files needed by systemd -- Tyler Hicks Thu, 08 Nov 2012 11:37:06 -0800 acpid (1:2.0.17-1) unstable; urgency=low * Imported Upstream version 2.0.17 -- Michael Meskes Mon, 17 Sep 2012 14:20:55 +0200 acpid (1:2.0.16-2) unstable; urgency=low * Depend on kmod instead of the transitional package module-init-tools. (Closes: #683987) -- Michael Meskes Wed, 08 Aug 2012 11:55:33 +0200 acpid (1:2.0.16-1ubuntu1) quantal; urgency=low * Merge from Debian testing (LP: #1006679), remaining changes: - Replace init script with Upstart job + This does not load modules, unlike the init script, since these are all loaded by ACPI:* modaliases now (and thus by udev) - debian/control: Bump build-dependency on debhelper for Upstart-aware dh_installinit - debian/acpid.install, debian/acpid.preinst: continue installing /etc/acpi/events/powerbtn and /etc/acpi/powerbtn.sh, deferring the migration to acpi-support-base; and drop the Recommends: on acpi-support-base for the same reason. - Source /usr/share/acpi-support/power-funcs in powerbtn.sh - debian/powerbtn.sh: ensure that /usr/share/acpi-support/power-funcs exists before sourcing it; note that acpid does not depend on acpi-support (which is fine, as it brings in lots of X dependencies not appropriate for servers); this fix will allow Ubuntu servers (especially those in VMs) to run acpid and catch and handle power button events again. - debian/powerbtn.sh: gnome-power-manager is no more, check for gnome-settings-daemon now. This fixes immediate shutdown when the power button is pressed. - debian/acpid.install, debian/acpid.links: Don't install socket and service files needed by systemd * Dropped changes: - Fix build error with GCC-4.5, build with -Wno-error=sign-compare; no longer needed. * debian/acpid.install, debian/rules: Migrate the Ubuntu changes for powerbtn.sh to debhelper 7 -- Tyler Hicks Wed, 30 May 2012 17:45:36 -0700 acpid (1:2.0.16-1) unstable; urgency=low * Imported Upstream version 2.0.16 -- Michael Meskes Sun, 01 Apr 2012 12:38:32 +0200 acpid (1:2.0.15-2) unstable; urgency=low * Applied upstream's patch to fix socket permissions. (Closes: #664705) -- Michael Meskes Wed, 21 Mar 2012 09:37:16 +0100 acpid (1:2.0.15-1) unstable; urgency=low * Imported Upstream version 2.0.15 * Migrated to debhleper 7. -- Michael Meskes Sun, 18 Mar 2012 14:44:34 +0100 acpid (1:2.0.14-3) unstable; urgency=low * Added upstream patch to remove pointless "See Also" section from manpage. (Closes: #656676) * Bumped Standards-Version to 3.9.3, no changes needed. * Enable socket for systemd. (Closes: #661344) -- Michael Meskes Wed, 29 Feb 2012 13:24:37 +0100 acpid (1:2.0.14-2) unstable; urgency=low * Made init script start before/stop after gdm3 instead of gdm which does not exist anymore. (Closes: #655075) * Enable hardened build flags. Thanks to Moritz Muehlenhoff (Closes: #653502) -- Michael Meskes Tue, 10 Jan 2012 17:27:11 +0100 acpid (1:2.0.14-1) unstable; urgency=low * Fix shell command injection in powerbtn.sh * Imported Upstream version 2.0.14 -- Michael Meskes Sun, 18 Dec 2011 14:41:11 +0100 acpid (1:2.0.13-1) unstable; urgency=low * Imported Upstream version 2.0.13 * Added systemd .service and .socket files. Thanks to Helmut Grohne (Closes: #647556) -- Michael Meskes Thu, 17 Nov 2011 11:54:46 +0100 acpid (1:2.0.12-1) unstable; urgency=low * Imported Upstream version 2.0.12 -- Michael Meskes Tue, 23 Aug 2011 12:57:56 +0200 acpid (1:2.0.11-1) unstable; urgency=high * Imported Upstream version 2.0.11 which sets umask to 0077 for scripts run by acpid. * Added build-arch and build-indep targets to rules file. -- Michael Meskes Mon, 01 Aug 2011 20:37:55 +0200 acpid (1:2.0.10-1ubuntu3) precise; urgency=low * SECURITY UPDATE: Arbitrary code execution in the power button handling script (LP: #893821) - debian/powerbtn.sh: Ensure that the DBUS_SESSION_BUS_ADDRESS environment variable is only read from a process owned by the user that will be evaluating the variable. - CVE-2011-2777 * SECURITY UPDATE: Unprivileged users may be able to write to directories and read files created by event handler scripts - event.c: Set a restrictive umask of 0077 before running an event handler script. Based on upstream patch. - CVE-2011-4578 -- Tyler Hicks Wed, 07 Dec 2011 16:33:35 -0600 acpid (1:2.0.10-1ubuntu2) oneiric; urgency=low * ./debian/powerbtn.sh: gnome-power-manager is no more, check for gnome-settings-daemon now. This fixes immediate shutdown when the power button is pressed. (LP: #837266) -- Martin Pitt Tue, 30 Aug 2011 12:07:43 +0200 acpid (1:2.0.10-1ubuntu1) oneiric; urgency=low * Merge with Debian; remaining changes: - see 1:2.0.9-1ubuntu1 changelog. -- Matthias Klose Fri, 20 May 2011 15:03:02 +0200 acpid (1:2.0.10-1) unstable; urgency=low * Imported Upstream version 2.0.10 * Bumped Standards-Version to 3.9.2, no changes needed. -- Michael Meskes Thu, 19 May 2011 15:51:12 +0200 acpid (1:2.0.9-1ubuntu1) oneiric; urgency=low * Merge from debian unstable (LP: #776687), remaining changes: - Replace init script with Upstart job + This does not load modules, unlike the init script, since these are all loaded by ACPI:* modaliases now (and thus by udev) - debian/control: Bump build-dependency on debhelper for Upstart-aware dh_installinit - debian/preinst, debian/acpid.install, debian/control, debian/rules: continue installing /etc/acpi/events/powerbtn and /etc/acpi/powerbtn.sh, deferring the migration to acpi-support-base; and drop the Recommends: on acpi-support-base for the same reason. - Source /usr/share/acpi-support/power-funcs in powerbtn.sh - debian/powerbtn.sh: ensure that /usr/share/acpi-support/power-funcs exists before sourcing it; note that acpid does not depend on acpi-support (which is fine, as it brings in lots of X dependencies not appropriate for servers); this fix will allow Ubuntu servers (especially those in VMs) to run acpid and catch and handle power button events again. - Fix build error with GCC-4.5, build with -Wno-error=sign-compare. -- Lorenzo De Liso Tue, 03 May 2011 22:20:47 +0200 acpid (1:2.0.9-1) unstable; urgency=low * Imported Upstream version 2.0.9 -- Michael Meskes Sun, 17 Apr 2011 16:33:17 +0200 acpid (1:2.0.8-4) unstable; urgency=low * Updated homepage filed to point to new URL. (Closes: #618537) * Removed all code handling /etc/init.d/hal which does not exist anymore in newer versions. (Closes: #618905) -- Michael Meskes Fri, 25 Mar 2011 15:28:00 +0100 acpid (1:2.0.8-3) unstable; urgency=low * Allow build flags to be customized by setting DEB_BUILD_OPTIONS in the build-time environment. Thanks to Jonathan Nieder * Remove variable that is not used in kacpimon. Thanks to Jonathan Nieder (Closes: #616306) -- Michael Meskes Fri, 11 Mar 2011 12:16:31 +0100 acpid (1:2.0.8-2) unstable; urgency=low * Make both sides of the comparison signed so the package builds again. (Closes: #616194) -- Michael Meskes Thu, 03 Mar 2011 12:14:12 +0100 acpid (1:2.0.8-1) unstable; urgency=low * Imported Upstream version 2.0.8 -- Michael Meskes Wed, 16 Feb 2011 09:25:51 +0100 acpid (1:2.0.7-1ubuntu2) natty; urgency=low * Fix build error with GCC-4.5, build with -Wno-error=sign-compare. -- Matthias Klose Fri, 07 Jan 2011 14:00:59 +0100 acpid (1:2.0.7-1ubuntu1) natty; urgency=low * Merge from debian unstable (LP: #507778), remaining changes: - Replace init script with Upstart job + This does not load modules, unlike the init script, since these are all loaded by ACPI:* modaliases now (and thus by udev) - debian/control: Bump build-dependency on debhelper for Upstart-aware dh_installinit - debian/preinst, debian/acpid.install, debian/control, debian/rules: continue installing /etc/acpi/events/powerbtn and /etc/acpi/powerbtn.sh, deferring the migration to acpi-support-base; and drop the Recommends: on acpi-support-base for the same reason. - Source /usr/share/acpi-support/power-funcs in powerbtn.sh (LP: #508073) - debian/powerbtn.sh: ensure that /usr/share/acpi-support/power-funcs exists before sourcing it; note that acpid does not depend on acpi-support (which is fine, as it brings in lots of X dependencies not appropriate for servers); this fix will allow Ubuntu servers (especially those in VMs) to run acpid and catch and handle power button events again; LP: #570450 * Dropped changes: - New patch, missing-includes, to fix missing includes of sys/types.h and sys/stat.h for umask() and stat() in acpid.c; fixes FTBFS: no longer needed - Update patch missing-includes to also fix the same missing includes in sock.c; this is all fixed in 2.0.x versions of acpid: no longer needed -- Lorenzo De Liso Tue, 23 Nov 2010 20:26:47 +0100 acpid (1:2.0.7-1) unstable; urgency=low * Imported Upstream version 2.0.7 -- Michael Meskes Tue, 16 Nov 2010 08:47:57 +0100 acpid (1:2.0.6-2) unstable; urgency=low * Added prepatch from 2.0.7 to remove superfluous logging. (Closes: #598198) * Added prepatch from 2.0.7 to add support for more buttons. (Closes: #600564) - thanks to Stanislav Maslovski * Bumped Standards-Version to 3.9.1, no changes needed. -- Michael Meskes Sun, 14 Nov 2010 15:14:38 +0100 acpid (1:2.0.6-1) unstable; urgency=low * Imported Upstream version 2.0.6 -- Michael Meskes Fri, 18 Jun 2010 11:07:01 +0200 acpid (1:2.0.5-1) unstable; urgency=low * Imported Upstream version 2.0.5 -- Michael Meskes Sun, 16 May 2010 11:24:54 +0200 acpid (1:2.0.4-1) unstable; urgency=low * New Upstream version 2.0.4 * Added source format file. -- Michael Meskes Thu, 22 Apr 2010 09:44:05 +0200 acpid (1:2.0.3-1) unstable; urgency=low * New Upstream version 2.0.3 -- Michael Meskes Wed, 17 Mar 2010 10:05:04 +0100 acpid (1:2.0.2-1) unstable; urgency=low * New upstream version. * Bumped Standards-Version to 3.8.4, no changes needed. -- Michael Meskes Mon, 15 Feb 2010 16:25:13 +0100 acpid (1:2.0.1-2) unstable; urgency=low * Acpid does work on non-i386/amd64 archs but not on non-linux systems. * Prevent breakage of Xserver resulting from a may connection number that was set too low. (Closes: #565908) - thanks to Willi Mann * Extended kacpimon description to explain the package a little bit better. * Escape unescaped dashes in manpage. -- Michael Meskes Sun, 24 Jan 2010 14:30:56 +0100 acpid (1:2.0.1-1) unstable; urgency=low * Imported Upstream version 2.0.1 * Removed patch system which is no longer needed because upstream included all our patches. * Install kacpimon manpage. -- Michael Meskes Sat, 16 Jan 2010 11:35:14 +0100 acpid (1:2.0.0-2) unstable; urgency=low * Put kacpimon back into the right section and priority. * Make loading of all modules work with modules.dep files with relative paths. (Closes: #563915) * Do not include /etc/default/rcS in init script because it is not needed. -- Michael Meskes Fri, 08 Jan 2010 09:16:54 +0100 acpid (1:2.0.0-1) unstable; urgency=low * New Upstream version from new source tree that already incorporates the netlink patch.. * Build kacpimon from the new source tree too. -- Michael Meskes Mon, 21 Dec 2009 13:03:48 +0100 acpid (1.0.10-5ubuntu4) maverick; urgency=low * Update patch missing-includes to also fix the same missing includes in sock.c; this is all fixed in 2.0.x versions of acpid. -- Loïc Minier Sun, 27 Jun 2010 14:34:03 +0200 acpid (1.0.10-5ubuntu3) maverick; urgency=low * New patch, missing-includes, to fix missing includes of sys/types.h and sys/stat.h for umask() and stat() in acpid.c; fixes FTBFS. -- Loïc Minier Sun, 27 Jun 2010 14:26:12 +0200 acpid (1.0.10-5ubuntu2.1) lucid-proposed; urgency=low * debian/powerbtn.sh: ensure that /usr/share/acpi-support/power-funcs exists before sourcing it; note that acpid does not depend on acpi-support (which is fine, as it brings in lots of X dependencies not appropriate for servers); this fix will allow Ubuntu servers (especially those in VMs) to run acpid and catch and handle power button events again; LP: #570450 -- Dustin Kirkland Mon, 26 Apr 2010 17:25:02 -0500 acpid (1.0.10-5ubuntu2) lucid; urgency=low * Source /usr/share/acpi-support/power-funcs in powerbtn.sh (LP: #508073) -- Jonathan Thomas Fri, 15 Jan 2010 19:59:47 -0500 acpid (1.0.10-5ubuntu1) lucid; urgency=low * Merge from Debian testing. Remaining changes: - Replace init script with Upstart job. - This does not load modules, unlike the init script, since these are all loaded by ACPI:* modaliases now (and thus by udev) - debian/control: - Bump build-dependency on debhelper for Upstart-aware dh_installinit - debian/preinst, debian/acpid.install, debian/control, debian/rules: continue installing /etc/acpi/events/powerbtn and /etc/acpi/powerbtn.sh, deferring the migration to acpi-support-base; and drop the Recommends: on acpi-support-base for the same reason. -- Steve Langasek Wed, 23 Dec 2009 00:32:09 +0000 acpid (1.0.10-5) unstable; urgency=high * Correct permissions that were incorrectly set by very old acpid versions. This fixes CVE-2009-4235. (Closes: #560771) -- Michael Meskes Tue, 15 Dec 2009 13:11:29 +0100 acpid (1.0.10-4ubuntu1) lucid; urgency=low * Merge from Debian testing. Remaining changes: - Replace init script with Upstart job. - This does not load modules, unlike the init script, since these are all loaded by ACPI:* modaliases now (and thus by udev) - debian/control: - Bump build-dependency on debhelper for Upstart-aware dh_installinit * Dropped changes, integrated upstream: - build with -D_GNU_SOURCE to make "struct ucred" available - acpid.*, event.c, ud_socket.*: limit the number of non-root clients, correctly close dead connections. - Remove the logrotate file on upgrade - Bump Standards-Version to 3.8.0 - debian/powerbtn.sh: - Update for KDE 4 - Add dalston-power-applet to list of handlers for power button events - add xfce4-power-manager to the list of handlers as well. * Dropped changes, superseded by upstart conversion: - debian/acpid.init.d: add the 'status' action - Replace "multiuser" deprecated init mode in debian/rules with manual arguments. Adapt the corresponding change in LSB init script header and runtime dependency in debian/control - depend on sysv-rc * debian/preinst, debian/acpid.install, debian/control, debian/rules: continue installing /etc/acpi/events/powerbtn and /etc/acpi/powerbtn.sh, deferring the migration to acpi-support-base; and drop the Recommends: on acpi-support-base for the same reason. -- Steve Langasek Fri, 18 Dec 2009 07:44:04 +0000 acpid (1.0.10-4) unstable; urgency=low * Updated netlink patch to version 6. -- Michael Meskes Tue, 17 Nov 2009 14:50:01 +0100 acpid (1.0.10-3) unstable; urgency=low * Made acpid recommend correct version of acpi-support-base. * Added missing input defines for Thinkpads. (Closes: #521280) - thanks to Harald Braumann * Fixed package description. (Closes: #549948) - thanks to Justin B Rye * Clarify some wording. - thanks to Thiemo Nagel * Bumped Standards-Version to 3.8.3, no changes needed. * Fix some lintian warnings. * Updated list of power managers. (Closes: #547326) * Stopping for single user mode could be done by sendsigs as well. * Updated to netlink patch to version 1.0.10-netlink5. (Closes: #522756) -- Michael Meskes Mon, 09 Nov 2009 14:46:15 +0100 acpid (1.0.10-2) unstable; urgency=low * Updated netlink patch to version 1.0.10-netlink2. * Added patch to make acpid compile with gcc 4.4, closes: #526665 -- Michael Meskes Mon, 04 May 2009 14:41:24 +0200 acpid (1.0.10-1) unstable; urgency=high * New upstream version fixing CVE-2009-0798. * Removed fixfd patch which was applied upstream. * Made example powerbtn.sh script work with kde4, closes: #526000 -- Michael Meskes Tue, 28 Apr 2009 09:24:25 +0200 acpid (1.0.8-8) unstable; urgency=low * Fixed netlink patch to not expect long option --netlink to carry an argument, closes: #524223 * Do not remove /etc/acpi/ config at each upgrade, closes: #524528 -- Michael Meskes Mon, 20 Apr 2009 14:04:32 +0200 acpid (1.0.8-7) unstable; urgency=low * Fixed ioctl call to use correct buffer size, closes: #521512 * Do not print error message for missing event file unless we are in debug mode, closes: #521666 * Bumped Standards-Version to 3.8.1, no changes needed. -- Michael Meskes Sun, 29 Mar 2009 17:13:02 +0200 acpid (1.0.8-6) unstable; urgency=low * Start acpid even if /proc/acpi/event doesn't exist, closes: #516079 * Recommend acpi-support-base so a script handling power button pressing is installed. * If the power button script had been changed, not only rename it but also keep a changed events file to not lose functionality, closes: #516083 -- Michael Meskes Thu, 19 Feb 2009 10:03:40 +0100 acpid (1.0.8-5) unstable; urgency=low * Reverted redirection patch, it broke debug mode. -- Michael Meskes Thu, 19 Feb 2009 09:44:59 +0100 acpid (1.0.8-4) unstable; urgency=low * Added patch to correctly redirect stdin/stdout/stderr to /dev/null. * Added patch by Ted Felix adding netlink support to acpid, closes: #462467, #515773 -- Michael Meskes Wed, 18 Feb 2009 12:05:51 +0100 acpid (1.0.8-3) unstable; urgency=low * Only conditionally restart hal on purge, closes: #515650 * Remove the remaining scriptlets in /etc/acpi. All files are still available and installed as examples under /usr/share/doc/acpid/examples but not under /etc/acpi anymore. * Fixed GPL version information in copyright file. -- Michael Meskes Tue, 17 Feb 2009 11:10:42 +0100 acpid (1.0.8-2) unstable; urgency=low [ Loic Minier ] * Add git-buildpackage config debian/gbp.conf. [ Michael Meskes ] * Added patch by Harald Braumann to correctly open /dev/null, closes: #483805 * Removed old syslog patch as upstream has the same/similar functionality nowadays, closes: #496574 * Made powerbtn.sh script fall back to shutdown if dbus fails, closes: #492756 * Restart hal in case of acpid removal, closes: #505663 -- Michael Meskes Wed, 11 Feb 2009 16:53:06 +0100 acpid (1.0.8-1) unstable; urgency=low [ Loic Minier ] * Comment out OPTIONS in the acpid defaults file as -c /etc/acpi/events is the default anyway; this paves the way to a future removal of this file. * Test for /proc/acpi/event instead of /proc/acpi in init script; see Debian #440870. * Document rationale for hal restart in postinst. [ Michael Meskes ] * New upstream version. * Moved our patches to debian/patches and added support for quilt. -- Michael Meskes Wed, 12 Nov 2008 14:29:15 +0100 acpid (1.0.6-16) unstable; urgency=low [ Loic Minier ] * Reword hints in /etc/default/acpid; suggested by Julien Blache. * Drop bogus space in modules.dep causing modules without dependencies to not be loaded for MODULES="all". * Check for read permissions on the defaults file before attempting to source it. * Don't load any module (MODULES default to empty string) when the default file doesn't exist or doesn't specify MODULES. * Ignore the result of load_modules. * Unset MODPROBE_OPTIONS to work around a bug in initramfs which leaks this env var Launchpad #291619 and a bug in modprobe --all --quiet which doesn't load all modules and exits with non-zero exit status Debian.org #504088; thanks Derrick Karpo and Julien Blache; closes: #502704. [ Michael Meskes ] * Make sure there is no link created in runlevel 0 and 6 to stop acpid. * Remove old links in runlevel 0 and 6, closes: #502613. * Comment out MODULES setting in default file, so no module is loaded per default. -- Loic Minier Sun, 02 Nov 2008 10:28:14 +0100 acpid (1.0.6-15) unstable; urgency=low [ Michael Meskes ] * Fixed check for /proc/modules to not throw an error closes: #502881, #502704 [ Loic Minier ] * Fix above fix. :-P -- Michael Meskes Tue, 21 Oct 2008 12:55:00 +0200 acpid (1.0.6-14) unstable; urgency=low [ Loic Minier ] * Merge support for the "status" action in the acpid init script from the Ubuntu package; depend on lsb-base >= 3.2-14. * Don't stop acpid in runlevels 0 and 6; from Ubuntu, closes:#495544 * Fix support for Ubuntu kernels, stop guessing distro but always try to use the ubuntu/acpi module dir if present; this allows using Ubuntu kernels on Ubuntu, removes references to Ubuntu from a number of places, and makes the script simpler to maintain and more efficient; also matches the current Ubuntu script. * Cleanup rules; drop DH_VERBOSE. * Wrap build-deps and deps in control to get cleaner diffs. * Add myself to uploaders. * Drop obsolete information from README.Debian. * Cleanup the awful init script. - Drop support for *.o kernel module files; .ko is used since 2.5 kernels. - Greatly simplify computing the list of available acpi modules by parsing modules.dep(5) instead of running find and sh multiple times. - Rename debian/acpid.init.d to debian/acpid.init to match debhelper's documented name (debhelper does pick up .init.d as well, but this is undocumented); this also avoid confusing vim which believe it's a D file. - Don't disable printk when loading ACPI modules; this is not only fragile, broken, and intrusive, it's also out of the realm of acpid to do. This snippet: [ "$VERBOSE" = "no" ] && echo "0 0 0 0" > /proc/sys/kernel/printk can be moved to a more sensible place if it makes sense during boot, but I doubt anybody wants that. - Fix support for kernels without dynamic module loading; closes: #500659. * Use Vcs-* instead of XS-Vcs-* and fix URLs to point at the new git repos; closes: #501305. * Remove obsolete conffile /etc/logrotate.d/acpid in preinst; thanks to James Westby and Ubuntu; LP: #263888. It's interesting to note that this caused the new acpid to die once per week when logrotation kicked in. Closes: #487815, #491058, #495686 * Pass -s to dh_* commands in binary-arch. * Resume shipping /etc/acpi/powerbtn.sh and /etc/acpi/events/powerbtn in acpid. They are also installed in the examples for people who symlink to the examples. Please note that powerbtn.sh disables itself when it detects a running power management daemon such as gnome-power-manager or kpowersave. * Add -D_GNU_SOURCE in Makefile's CFLAGS to fix build with newer libc6 (such as 2.8+20080809-1 in experimental or 2.8~20080505-0ubuntu7in Ubuntu intrepid) in making "struct ucred" available; see http://sourceware.org/bugzilla/show_bug.cgi?id=6545. [ Michael Meskes ] * Fixed path to hal pidfile, closes: #440870 -- Loic Minier Mon, 13 Oct 2008 19:12:28 +0200 acpid (1.0.6-13) unstable; urgency=low * Check for distribution during build time, closes: #499825, #500003 -- Michael Meskes Wed, 24 Sep 2008 12:26:45 +0200 acpid (1.0.6-12) unstable; urgency=low * Check for Ubuntu/Debian in apt sources list instead of /etc/issue, closes: #499825, #499854 -- Michael Meskes Tue, 23 Sep 2008 10:38:38 +0200 acpid (1.0.6-11) unstable; urgency=low * Changed maintainer to Debian Acpi Team. * Do not call lsb-release on startup, closes: #491388 -- Michael Meskes Wed, 27 Aug 2008 13:49:56 +0200 acpid (1.0.6-10) unstable; urgency=low * Removed Ubuntu version information. * Back to only including some modules on default. Using all modules creates strange error messages and even backtraces on some machines. ALL option remains listed but commented out, closes: #484354 * Add video to list of modules, closes: #459237 * Made package lintian clean. * In Debian do not load Ubuntu modules from Ubuntu directory. I do not see any package providing this directory. * Do only install powerbutton scripts as example, closes: #481903, #484306, #253423 * Fixed watch file. * Clarified specification of acpid options, closes: #486788 * Bumped Standards-Version to 3.8.0 -- Michael Meskes Fri, 20 Jun 2008 14:21:14 +0200 acpid (1.0.6-9ubuntu8) karmic; urgency=low * debian/powerbtn.sh: add xfce4-power-manager to the list of handlers as well. LP: #425155 -- Lionel Le Folgoc Wed, 23 Sep 2009 14:53:01 +0200 acpid (1.0.6-9ubuntu7) karmic; urgency=low * debian/powerbtn.sh: - Add dalston-power-applet to list of handlers for power button events (part of fix for LP: #432578). -- Gary Lasker Fri, 18 Sep 2009 12:25:33 -0400 acpid (1.0.6-9ubuntu6) karmic; urgency=low FFE LP: #427356. * Replace init script with Upstart job. - This does not load modules, unlike the init script, since these are all loaded by ACPI:* modaliases now (and thus by udev) * debian/control: - Bump build-dependency on debhelper for Upstart-aware dh_installinit -- Scott James Remnant Tue, 15 Sep 2009 03:34:49 +0100 acpid (1.0.6-9ubuntu5) karmic; urgency=low * Upload jaunty changes to karmic -- Jonathan Riddell Tue, 28 Apr 2009 11:07:28 +0100 acpid (1.0.6-9ubuntu4.9.04.3) jaunty-proposed; urgency=low * Update /etc/acpi/powerbtn.sh for KDE 4 Closes LP: #368497 -- Jonathan Riddell Tue, 28 Apr 2009 11:01:13 +0100 acpid (1.0.6-9ubuntu4.9.04.2) jaunty-security; urgency=low * SECURITY UPDATE: denial of service via too many open files - acpid.*, event.c, ud_socket.*: limit the number of non-root clients, correctly close dead connections. - CVE-2009-0798 -- Marc Deslauriers Wed, 22 Apr 2009 15:09:59 -0400 acpid (1.0.6-9ubuntu4) intrepid; urgency=low * Remove the logrotate file on upgrade, as the previous one that was installed did a "kill -USR1" on the acpid process to cause it to reload its logfiles. As the new acpid doesn't use a log file it doesn't catch this signal, which means that once a week acpid is killed. As it doesn't have a logfile the logrotate file is not needed, and so is no longer installed, but as it was a conffile it is not removed on upgrades. Thanks to Loic Minier for his help with the fix. (LP: #263888) - ad81211857dabeb88538e0f90c922b7c787b34c5 in Debian's pkg-acpi git repo. -- James Westby Wed, 24 Sep 2008 15:19:14 +0100 acpid (1.0.6-9ubuntu3) intrepid; urgency=low * Replace "multiuser" deprecated init mode in debian/rules with manual arguments. Adapt the corresponding change in LSB init script header and runtime dependency in debian/control (LP: #254249) -- Didier Roche Wed, 13 Aug 2008 19:50:50 +0200 acpid (1.0.6-9ubuntu2) intrepid; urgency=low * debian/control - Depend on lsb-base >= 3.2-14, providing status_of_proc() - Bump Standards-Version to 3.8.0 * debian/acpid.init.d - Add the 'status' action (LP: #251681) -- Nathan Handler Thu, 24 Jul 2008 21:03:02 -0500 acpid (1.0.6-9ubuntu1) intrepid; urgency=low * Merge from debian unstable, remaining changes: - init script starts earlier - depend on sysv-rc * removed ubuntu specific -G (lockfilegroup) options, it does no longer apply because acpid now uses syslog by default * disable debian update-rc.d call to make acpid run earlier on upgrade, out packages already run early * build with -D_GNU_SOURCE to make "struct ucred" available (see also http://sourceware.org/bugzilla/show_bug.cgi?id=6545) -- Michael Vogt Mon, 02 Jun 2008 09:58:14 +0200 acpid (1.0.6-9) unstable; urgency=low * Don't depend on sysv-rc; closes: #481912 -- Anibal Monsalve Salazar Fri, 23 May 2008 13:50:49 +1000 acpid (1.0.6-8) unstable; urgency=low * Update watch file -- Anibal Monsalve Salazar Mon, 19 May 2008 19:31:31 +1000 acpid (1.0.6-7) unstable; urgency=low * Fix dash syntax error in acpid.init.d; closes: #481824 -- Anibal Monsalve Salazar Mon, 19 May 2008 11:54:32 +1000 acpid (1.0.6-6) unstable; urgency=low * New maintainer; closes: #481580 * Merge Ubuntu changes - Use MODULES="all"; closes: #449076 - Disable printk; closes: #449078 - Loading modules from the ubuntu directory; closes: #449080 * Limit syslog messages to >= NOTICE to avoid spamming unless in debug mode; patch by Loic Minier; closes: #447200 * Include "--oknodo" in init script start action; patch by Daniel Hahler; closes: #475785 * Don't fail during installation; closes: #447339 * Don't delete conffiles in /etc; closes: #444666 * Provide power button support; closes: #444676 * Fix typo in acpid.8; closes: #444065 * Fix "restart/start fails"; closes: #481327, #479517 * Fix "tar error messages on upgrade"; closes: #447099, #451220 * Fix "init script start/stop priorities not updated on upgrades"; closes: #462185 * Fix the following lintian issues: W: acpid source: debian-rules-ignores-make-clean-error line 18 -- Anibal Monsalve Salazar Sat, 17 May 2008 09:54:17 +1000 acpid (1.0.6-5.1) unstable; urgency=low * Non-maintainer upload. * Correct dependency information provided in init.d script (Closes: #459493). -- Petter Reinholdtsen Tue, 4 Mar 2008 13:53:46 +0100 acpid (1.0.6-5) unstable; urgency=low * New mantainer. (Closes: #455197) * debian/control: - Bump Standards-Version: 3.7.3. - Build-depends debhelper >=5. - Added Homepage header. * debian/watch, added. -- Jose Carlos Medeiros Tue, 15 Jan 2008 18:02:33 -0200 acpid (1.0.6-4) unstable; urgency=medium * Add lost directory /etc/acpi/events to package again. (Closes: #444667) * Improve the last NEWS.Debian entry to be more explicit. -- Torsten Werner Tue, 09 Oct 2007 07:44:46 +0200 acpid (1.0.6-3) unstable; urgency=low * Stop and start hal in postinst. (Closes: #352512, #380520, #440870) * Start acpid earlier when booting. (Closes: #320094) * Fix call to 'dpkg --compare-versions' in postinst. -- Torsten Werner Mon, 24 Sep 2007 07:41:16 +0200 acpid (1.0.6-2) unstable; urgency=low * Remove old logs and logrotate conffile. (Closes: #178894, #360170, #443385) * Add debian/NEWS with an explanation of the change. * Revert any changes to acpid.c corresponding to the old log mechanism. (Closes: #388048) * Remove the old powerbtn scripts and provide them as examples. (Closes: #285779, #354445, #386026, #400409, #401414, #417306, #422463, #425291, #427938) * Add option -P to shutdown in powerbtn.sh. (Closes: #365972) -- Torsten Werner Sun, 23 Sep 2007 16:15:42 +0200 acpid (1.0.6-1) unstable; urgency=low * New upstream release (Closes: #442383) * Change Maintainer field to myself as requested by the former maintainer. * Add XS-Vcs-* headers. * Install upstream's Changelog file. -- Torsten Werner Tue, 18 Sep 2007 16:48:54 +0200 acpid (1.0.4-7.1) unstable; urgency=low * Non-maintainer upload. * Fixed typo in init script (Closes: #413729). -- Nico Golde Thu, 29 Mar 2007 23:22:37 +0200 acpid (1.0.4-7) unstable; urgency=low * Fixed typo in manual page (Closes: #404680) * Updated README (Closes: #360167) * Include lsb compliant logging (Closes: #384687) * Fixed logrotate/cron error if acpid is not running (Closes: #388038) * Removed powerbutton scripts - these are contained in other packages (Closes: #354445, #285779) * Added lsb compliant init script styles (Closes: #383591) -- Cajus Pollmeier Mon, 5 Mar 2007 09:33:07 +0100 acpid (1.0.4-6) unstable; urgency=low * Fixed powerptn.sh to respect shutdown changes (Closes: #365972) -- Cajus Pollmeier Thu, 4 May 2006 08:47:06 +0200 acpid (1.0.4-5ubuntu9) hardy; urgency=low [ Daniel Hahler ] * debian/acpid.postinst: Stop and start hal, if present. This allows acpid to take /proc/acpi/event and hal will ignore this kernel interface, when acpid is installed. (LP: #63450) * debian/acpid.init.d: Add "--oknodo" to the start-stop-daemon call in "start". The action must not fail, if acpid is already running. [ Michael Vogt ] * debian/acpid.postinst: do not restart hal on dapper upgrades (hal may hang forever because of a incompatible dbus) * only restart if hal is actually running -- Michael Vogt Wed, 16 Apr 2008 16:12:12 +0200 acpid (1.0.4-5ubuntu8) gutsy; urgency=low * Fix the broken Maintainer lines in debian/control. -- Adam Conrad Wed, 15 Aug 2007 23:47:42 +1000 acpid (1.0.4-5ubuntu7) gutsy; urgency=low * Build package for lpia. * Set Ubuntu maintainer address. -- Matthias Klose Fri, 10 Aug 2007 21:43:04 +0000 acpid (1.0.4-5ubuntu6) feisty; urgency=low * Load drivers from ubuntu directory as well as kernel acpi directory -- Matthew Garrett Sat, 10 Mar 2007 15:04:34 +0000 acpid (1.0.4-5ubuntu5) feisty; urgency=low * KubuntuFeistyLaptop spec: change debian/powerbtn.sh for KDE sessions: * single KDE session: issue KDE logout dialog for user to decide * multiple KDE sessions: send shutdown request to all KDE sessions (this is the same behaviour as before) -- Luka Renko Thu, 8 Feb 2007 10:28:09 +0100 acpid (1.0.4-5ubuntu4) edgy; urgency=low * Call modprobe with -b to allow user blacklisting. Ubuntu: #49017 -- Scott James Remnant Thu, 14 Sep 2006 15:13:52 +0100 acpid (1.0.4-5ubuntu3) edgy; urgency=low * Add forgotten versioned-dependency on sysv-rc to get new update-rc.d behaviour. Go me. -- Scott James Remnant Fri, 21 Jul 2006 01:22:57 +0100 acpid (1.0.4-5ubuntu2) edgy; urgency=low * Remove stop links from rc0 and rc6 -- Scott James Remnant Thu, 20 Jul 2006 23:14:18 +0100 acpid (1.0.4-5ubuntu1) edgy; urgency=low * Merge from debian unstable, remaining changes: - Lock file and groups, - LSB init script, - init script level change, - load all modules by default, - Power button handling changes. -- Scott James Remnant Tue, 11 Jul 2006 17:50:13 +0100 acpid (1.0.4-5) unstable; urgency=low * Fixed problem with logrotate and Xorg where the /proc/acpi/events gets locked by Xorg. -- Cajus Pollmeier Sun, 15 Jan 2006 22:23:05 +0100 acpid (1.0.4-4) unstable; urgency=low Changes by Michael Biebl: * Adapted scripts in /etc/acpi/ to let powersaved process the acpi event if it is running. * Updated standards version to 3.6.2. * Cleaned up debian/rules, make use of dh_* tools. Created the necessary acpid.* files. * Cleaned up debian/*, removed unused and unnecessary files. * Fixed package to make lintian/linda happy. Changes by Cajus Pollmeier: * Removed debconf integration (Closes: #336725, #336726, #333759, #331512) * Fixed typo in acpi_listen manpage (Closes: #342743) -- Cajus Pollmeier Sat, 14 Jan 2006 11:52:33 +0100 acpid (1.0.4-3) unstable; urgency=low * Added russian debconf translations (Closes: #324084) * Added portuguese debconf translations (Closes: #329872) * Included alternative dependency to debconf-2.0 -- Cajus Pollmeier Thu, 29 Sep 2005 11:08:25 +0200 acpid (1.0.4-2) unstable; urgency=low * Added logrotate control file (Closes: #306235) * Added vietnamese debconf translations (Closes: #307598) * Added basque debconf translations (Closes: #296865) * Added italian debconf translations (Closes: #288224) * Fixed amd64 specific type problem (Closes: #315070) * Re-fixed amd64 specific type problem (Closes: #285063) * Fixed copyright file by adding one missing original author (Closes: #290053) -- Cajus Pollmeier Sat, 9 Jul 2005 12:39:49 +0200 acpid (1.0.4-1ubuntu11) dapper; urgency=low * Fix /etc/acpi/powerbtn.sh so that it doesn't bork if 'pidof' returns multiple results. This stops the machine displaying the logout dialogue and then immediately shutting down anyway. (Closes: Ubuntu #46319) -- Paul Sladen Sat, 27 May 2006 15:54:53 +0100 acpid (1.0.4-1ubuntu10) dapper; urgency=low * Add support to set the group of the log file when acpid starts. By default this will set it to the adm group. -- Daniel Silverstone Wed, 15 Feb 2006 14:04:49 +0000 acpid (1.0.4-1ubuntu9) dapper; urgency=low * Check for gnome-power-manager rather than PowerManager. The name changed between dapper and breezy and without this, we would unconditionally shut the system down on a powerbutton event. * Also check for kded/klaptopdaemon and kpowersave for KDE options on the same policy management. * Closes: malone #31407 -- Daniel Silverstone Wed, 15 Feb 2006 11:41:20 +0000 acpid (1.0.4-1ubuntu8) breezy; urgency=low * Shorten and simplify init script messages -- Matt Zimmerman Thu, 15 Sep 2005 11:30:54 -0700 acpid (1.0.4-1ubuntu7) breezy; urgency=low * If power-manager is running, don't trigger the power button event ourselves -- Matthew Garrett Tue, 30 Aug 2005 18:33:22 +0100 acpid (1.0.4-1ubuntu6) breezy; urgency=low * Start acpid before dbus is started - hal needs acpid to be running already -- Matthew Garrett Tue, 30 Aug 2005 17:10:48 +0100 acpid (1.0.4-1ubuntu5) breezy; urgency=low * Interact with the new locking model in acpi-support * Fix gcc-4.0 compile error -- Matthew Garrett Mon, 22 Aug 2005 22:12:52 +0100 acpid (1.0.4-1ubuntu4) hoary; urgency=low * Turn off kernel printks if we're not verbose during module loading -- Thom May Wed, 2 Mar 2005 17:45:36 +0000 acpid (1.0.4-1ubuntu3) hoary; urgency=low * Check for the presence of a lockfile, and don't process events if it's there (Ubuntu: #6026) -- Thom May Tue, 1 Feb 2005 12:27:44 +0000 acpid (1.0.4-1ubuntu2) hoary; urgency=low * Use the new -Q argument to modprobe, add depend on the correct module-init-tools * Default back to trying to autoload everything (Ubuntu #4077) -- Thom May Fri, 14 Jan 2005 13:48:24 +0000 acpid (1.0.4-1ubuntu1) hoary; urgency=low * Resynchronise with Debian, resolved minor merging conflict. -- Martin Pitt Thu, 11 Nov 2004 10:38:26 +0100 acpid (1.0.4-1) unstable; urgency=low * New upstream release * I'm dropping support for older, acpi broken kernels now. Time to clean up. -- Cajus Pollmeier Mon, 1 Nov 2004 11:49:33 +0100 acpid (1.0.3-21ubuntu1) hoary; urgency=low * Resynchronise with Debian. -- Scott James Remnant Wed, 27 Oct 2004 12:05:00 +0100 acpid (1.0.3-21) unstable; urgency=low * Fixed dcop problem for shutdown (Closes:#274339) -- Cajus Pollmeier Fri, 1 Oct 2004 11:10:24 +0200 acpid (1.0.3-20) unstable; urgency=high * Added detection for non files in run-parts code (Closes:#268203) -- Cajus Pollmeier Mon, 30 Aug 2004 19:51:41 +0200 acpid (1.0.3-19ubuntu12) warty; urgency=low * Disable loading the platform specific acpi modules. (Warty #1451) -- Thom May Wed, 6 Oct 2004 14:18:58 +0100 acpid (1.0.3-19ubuntu11) warty; urgency=low * use xargs -r so we don't fail in the case of no acpi modules (Warty #1466) -- Thom May Mon, 20 Sep 2004 12:36:52 +0100 acpid (1.0.3-19ubuntu10) warty; urgency=low * Added versioned depend on lsb-base -- Nathaniel McCallum Fri, 3 Sep 2004 14:45:49 -0400 acpid (1.0.3-19ubuntu9) warty; urgency=low * log_warning_msg for failed modules, don't bomb out tho. (Warty 983, 991) -- Thom May Fri, 3 Sep 2004 17:08:34 +0100 acpid (1.0.3-19ubuntu8) warty; urgency=low * If a module is already loaded, log_success_msg rather than log_warning_msg -- Matt Zimmerman Thu, 2 Sep 2004 16:06:16 -0700 acpid (1.0.3-19ubuntu7) warty; urgency=low * debian/init: pretty initscript -- Nathaniel McCallum Thu, 2 Sep 2004 15:06:13 -0400 acpid (1.0.3-19ubuntu6) warty; urgency=low * install initrd script -- Thom May Fri, 27 Aug 2004 17:14:00 +0100 acpid (1.0.3-19ubuntu5) warty; urgency=low * Revert -4, since that causes the acpid socket to be reaped -- Thom May Tue, 24 Aug 2004 10:34:05 +0100 acpid (1.0.3-19ubuntu4) warty; urgency=low * Ensure acpid starts as early as possible, so we don't melt Scott's laptop -- Thom May Thu, 19 Aug 2004 14:04:55 +0100 acpid (1.0.3-19ubuntu3) warty; urgency=low * Load all modules -- Thom May Wed, 18 Aug 2004 14:11:45 +0100 acpid (1.0.3-19ubuntu2) warty; urgency=low * Get rid of FTBFS errors. -- LaMont Jones Sat, 31 Jul 2004 04:49:10 +0000 acpid (1.0.3-19ubuntu1) warty; urgency=low * Disable superfluous debconf note when acpi support is not present (Warty Bug#289) -- Matt Zimmerman Tue, 27 Jul 2004 13:26:05 -0700 acpid (1.0.3-19) unstable; urgency=low * Update dutch translations (Closes:#250719) * Added turkish translations (Closes:#252933) -- Cajus Pollmeier Fri, 28 May 2004 19:41:16 +0200 acpid (1.0.3-18) unstable; urgency=low * Fixed manpage to contain hint to runparts stylish naming convention in /etc/acpid/events (Closes:#250066) -- Cajus Pollmeier Sat, 22 May 2004 10:33:13 +0200 acpid (1.0.3-17) unstable; urgency=low * Added amd64 to list of supported architectures (Closes:#249055) -- Cajus Pollmeier Fri, 14 May 2004 21:22:53 +0200 acpid (1.0.3-16) unstable; urgency=low * Added czech po-debconf translation (Closes:#247377) * Modified init scripts start-stop daemon call to retry stopping acpid after two seconds (Closes:#247130) * Modified init script to check for ACPI presence in kernel _before_ doing any actions (Closes:#247490) -- Cajus Pollmeier Fri, 7 May 2004 22:27:40 +0200 acpid (1.0.3-15) unstable; urgency=low * Fixed powerbutton script which did a shutdown when a KDE user was logged in. Now it skips the shutdown, because kdm will do it for us. -- Cajus Pollmeier Fri, 23 Apr 2004 18:06:16 +0200 acpid (1.0.3-14) unstable; urgency=low * Fixed postrm script to clean some lost config files. (Closes: #242273) -- Cajus Pollmeier Thu, 8 Apr 2004 11:04:05 +0200 acpid (1.0.3-13) unstable; urgency=low * Removed support for configuring list of modules with debconf. I can't spend hours in fullfilling all wishes currently. Don't think anyone really needs this feature - and if: This is more an issue for a tool that detects hardware than one for the daemon itself. Implicitly closes: #241367. * Updated init script to skip loading of modules that are not present in system, but are configured in defaults file. -- Cajus Pollmeier Thu, 1 Apr 2004 06:56:27 +0200 acpid (1.0.3-12) unstable; urgency=low * Fixed possible problem in config script when installing for the first time (Closes:#241012) -- Cajus Pollmeier Tue, 30 Mar 2004 13:06:01 +0200 acpid (1.0.3-11) unstable; urgency=low * Included danish translations (Closes:#240044) -- Cajus Pollmeier Thu, 25 Mar 2004 19:52:46 +0100 acpid (1.0.3-10) unstable; urgency=low * Avoided overwriting of manual changes in defaults file (Closes:#239635) * Replaced init call by normal shutdown with more informative message (Closes:#239583) * Included upstream changelog (Closes:#235530) -- Cajus Pollmeier Tue, 23 Mar 2004 21:33:31 +0100 acpid (1.0.3-9) unstable; urgency=low * Made acpid close all used filehandles (Closes:#239350) -- Cajus Pollmeier Mon, 22 Mar 2004 14:56:57 +0100 acpid (1.0.3-8) unstable; urgency=low * Fixed clean target of debian/rules to call dh_clean (Closes:#239239) -- Cajus Pollmeier Mon, 22 Mar 2004 11:14:36 +0100 acpid (1.0.3-7) unstable; urgency=low * Added dutch po-debconf translation (Closes:#237816) * Added greek po-debconf translation (Closes:#237847) -- Cajus Pollmeier Sun, 21 Mar 2004 11:40:48 +0100 acpid (1.0.3-6) unstable; urgency=low * Modified start script to have the 2.6 module loading style (Closes:#236703) -- Cajus Pollmeier Fri, 12 Mar 2004 16:34:42 +0100 acpid (1.0.3-5) unstable; urgency=low * Changed description to a coffee cooking variant (Closes:#237199) -- Cajus Pollmeier Wed, 10 Mar 2004 20:51:52 +0100 acpid (1.0.3-4) unstable; urgency=low * Fixed typo in template, that made it in again. (Closes:#236005) * Included French translations, thanks to Clement Stenac. (Closes:#236375) -- Cajus Pollmeier Thu, 4 Mar 2004 07:55:24 +0100 acpid (1.0.3-3) unstable; urgency=low * Included Japanese translations, thanks to Hideki Yamane. (Closes:#235320) * Included Brazilian Portuguese translations, thanks to Andre Luis Lopes (Closes:#235462) * Workaround for non working postinst configure installed. (Closes:#234270) -- Cajus Pollmeier Sun, 29 Feb 2004 11:26:06 +0100 acpid (1.0.3-2) unstable; urgency=low * Added a sleep between stop and start in the init-scripts restart condition. This should fix the logrotate problem. (Closes:#234283) -- Cajus Pollmeier Wed, 25 Feb 2004 13:15:53 +0100 acpid (1.0.3-1) unstable; urgency=high * New upstream release -- Cajus Pollmeier Wed, 25 Feb 2004 10:08:34 +0100 acpid (1.0.2-12) unstable; urgency=low * Added missing true condition in postinstall script (Closes: #234274) -- Cajus Pollmeier Mon, 23 Feb 2004 10:08:19 +0100 acpid (1.0.2-11) unstable; urgency=high * Switched to invoke-rc.d in prerm script. (Closes: #234161) * Removed a - for some users - confusing message from debconf templates. (Closes: #234179) -- Cajus Pollmeier Sun, 22 Feb 2004 10:29:11 +0100 acpid (1.0.2-10) unstable; urgency=low * Fix typo in events file - powerbtn/powerbtn.sh (Closes:#233248) * Doing workaround in rules to remove setgid bits. Can't upload new orig.tar.gz. (Closes: #233628) * Changed the standard 'all' into a list of most common modules -- Cajus Pollmeier Tue, 17 Feb 2004 20:28:42 +0100 acpid (1.0.2-9) unstable; urgency=high * Yes, yes. I commented out this line, because I've acpi in built into my kernel. Enabled it again. (Closes: #232400) * Fixed some lintian related issues. -- Cajus Pollmeier Sun, 15 Feb 2004 09:23:31 +0100 acpid (1.0.2-8) unstable; urgency=low * Finetuning in init script for automatic module loading (Closes: #232400) * Added debconf script to help user, made 'load all modules' the default. * Unmasked signals so that processes started from acpid can receive TERM signals. (Closes: #206525) * Added changes from CVS. New upstream release is comming soon. -- Cajus Pollmeier Thu, 12 Feb 2004 18:58:29 +0100 acpid (1.0.2-7) unstable; urgency=low * Renamed acpid socket. gnome-applet seems to have a compiled in default for /var/run/acpid.socket. (Closes: #217932) -- Cajus Pollmeier Fri, 31 Oct 2003 21:15:17 +0100 acpid (1.0.2-6) unstable; urgency=low * Fixed module loader in init script. Credits go to Tim Wright. -- Cajus Pollmeier Wed, 22 Oct 2003 20:48:17 +0200 acpid (1.0.2-5) unstable; urgency=low * Ok. Removing socket support was no good idea. Obviously there are some programms that depend on it. Notice, that the socket is on a non standard location currently. (Closes: #207926) -- Cajus Pollmeier Thu, 9 Oct 2003 07:10:51 +0200 acpid (1.0.2-4) unstable; urgency=low * Removed socket support for Debian. I currently don't see any use in it. * Changed postrm to clean only config files (Closes: #202858) * Added acpid to logrotate.d (Closes: #200705) -- Cajus Pollmeier Fri, 5 Sep 2003 16:51:43 +0200 acpid (1.0.2-3) unstable; urgency=low * Make --purge remove /etc/acpi directory (Closes: #197981) -- Cajus Pollmeier Thu, 19 Jun 2003 08:43:48 +0200 acpid (1.0.2-2) unstable; urgency=low * Fixed module loading for kernel 2.5. Modules now have .ko as extension so that the former .o method wouldn't work (Closes: #193709) -- Cajus Pollmeier Sun, 18 May 2003 12:06:04 +0200 acpid (1.0.2-1) unstable; urgency=low * New upstream release -- Cajus Pollmeier Wed, 14 May 2003 07:39:25 +0200 acpid (1.0.1-8) unstable; urgency=low * Fixed automatic module loading script regex (Closes: #192711) -- Cajus Pollmeier Sat, 10 May 2003 10:27:14 +0200 acpid (1.0.1-7) unstable; urgency=low * Changed poweroff script to be dcop aware (Closes: #187493) * Made title line in control file to make it more meaningly (Closes: #181774) -- Cajus Pollmeier Fri, 4 Apr 2003 19:56:34 +0200 acpid (1.0.1-6) unstable; urgency=low * load modules even when acpi.o is not compiled in kernel (Closes: #173173) * updated standards-version -- Cajus Pollmeier Mon, 30 Dec 2002 13:58:26 +0100 acpid (1.0.1-5) unstable; urgency=low * added modules autoloading in startup script, see /etc/default/acpid (Closes: #173173) -- Cajus Pollmeier Sun, 29 Dec 2002 19:51:32 +0100 acpid (1.0.1-4) unstable; urgency=high * removed double freed pointer in event.c (Closes: #153288) -- Cajus Pollmeier Tue, 20 Aug 2002 08:05:31 +0100 acpid (1.0.1-3) unstable; urgency=high * forgot do close ia64 bug (Closes: #141101) * made run-parts stylish /etc/acpi/events (Closes: #141350) * renamed samples to examples and added joeys examples (Closes: #141351) -- Cajus Pollmeier Sat, 6 Apr 2002 10:21:15 +0100 acpid (1.0.1-2) unstable; urgency=high * Added ia64 for build -- Cajus Pollmeier Fri, 5 Apr 2002 08:34:01 +0100 acpid (1.0.1-1) unstable; urgency=high * new upstream release * Fixed event handling to fit the new specs - again -- Cajus Pollmeier Sat, 9 Mar 2002 12:10:51 +0100 acpid (1.0.0-4) unstable; urgency=high * Changed priority to optional (Closes: #135578) * Fixed event handling to fit the new specs -- Cajus Pollmeier Sat, 9 Mar 2002 12:10:51 +0100 acpid (1.0.0-3) unstable; urgency=high * Removed incompatibility message * Closed bugs that should have been fixed with 1.0.0-2 (Closes: #130934, #127451) * Fixed event handling with kernels patched with acpi-devel code * Added reload option to the initscript (Closes: #129425) -- Cajus Pollmeier Fri, 1 Mar 2002 15:13:06 +0100 acpid (1.0.0-2) unstable; urgency=low * Fixed logfile not beeing truncated * Changed line width of short description to less than 60 characters * Close bugs not related to this upstream release (Closes: #67465, #108796, #63956, #109559, #110698, #107047) -- Cajus Pollmeier Thu, 1 Nov 2001 13:30:16 +0100 acpid (1.0.0-1) unstable; urgency=low * New upstream release * Fixed read_line to work with unpatched 2.4.x kernels. -- Cajus Pollmeier Mon, 10 Aug 2001 12:12:41 +0200 acpid (0.2001051000-1) unstable; urgency=low * New upstream release (Closes: #97277, #104266) * New maintainer * 'acpictl' is no longer in the acpid package. (Closes: #79498) * 'acpid' doesn't need build-depends anymore (Closes: #105751) -- Robert van der Meulen Mon, 25 Jun 2001 16:01:12 +0200 acpid (0.2000071100-1) unstable; urgency=low * New upstream release -- Wichert Akkerman Wed, 12 Jul 2000 20:57:07 -0400 acpid (0.2000052200-1) unstable; urgency=low * New upstream release -- Wichert Akkerman Tue, 23 May 2000 13:41:51 +0200 acpid (0.2000042500-1) unstable; urgency=low * New upstream release * Fix a typo in the init-script * upstream changed the buildsystem again, updated debian/rules accordingly * Stop via executable, not pid-file (which doesn't exist) -- Wichert Akkerman Mon, 1 May 2000 23:00:46 +0200 acpid (0.20000317-2) unstable; urgency=low * Create /usr/doc compatibility symlinks -- Wichert Akkerman Fri, 7 Apr 2000 14:26:31 +0200 acpid (0.20000317-1) experimental; urgency=low * New snapshot -- Wichert Akkerman Mon, 3 Apr 2000 00:50:17 +0200 acpid (0.20000316-1) experimental; urgency=low * Initial release -- Wichert Akkerman Thu, 16 Mar 2000 12:24:51 +0100